SUBSIM: The Web's #1 resource for all submarine & naval simulations since 1997 |
03-07-14, 11:22 AM | #2 |
Growing Old Disgracefully
|
Installing TDW's Generic File Patcher Part 1
Last updated 14th November 2019
This Tutorial is for installing TDW's Generic File Patcher (GFP) anywhere on your system as a stand alone application. If a complete uninstall is done the stand alone GFP application is unaffected by this. When the re-install is done just reconnect the GFP Patches to the SH5 Folder again. DO NOT INSTALL THIS STAND ALONE VERSION FOR: The Wolves of Steel (TWoS) Sobers Mega Mod Link to the (GFP). http://www.subsim.com/radioroom/showthread.php?t=181433 Do Not put the GFP in JSGME or in any Silent Hunter 5 folder. It is recommended that you backup the 9 original files below that are in your Silent Hunter 5 Main Folder by Copying and Pasting them to a New Folder in the Ubisoft folder. (Picture 2) Likely looking Main Folder Path. C:\Ubisoft\Silent Hunter 5 1. Cameramanager.act 2. EnvSim.act 3. SimData.dll 4. Kernel.dll 5. Sh5.exe 6. SHCollisions.act 7. SHSim.act 8. SHSound.act 9. SH_NClient.dll Picture 1 > Shows original files when backed up in a folder. Picture 2 > Ubisoft folder behind the main game folder. Picture 3 > GFP168 folder. Picture 4 >Download the (GFP) in to the GFP168 Folder. Picture 5 > Open the Zip File and click on the Extract Tab. Picture 6 > Click Ok to confirm. Picture 7 > Shows the 8 files extracted to the GFP168 folder. Picture 8 > X to exit. Picture 9 > Start the application by double clicking on the Mickey Mouse icon. Picture 10 > Select your language and double click on it. Selecting the Language takes you to this next screen. Picture 11 > Opens to this screen. Click on File. Picture 12 > Open. Picture 13 > Select the file path to your Silent Hunter 5 game folder. Select Path to CameraManager.act. < First Patch. Computer. Drive C: Ubisoft folder Picture 14 > Silent Hunter 5 (Highlight folder only DO NOT OPEN). Click on OK. Repeat the instructions from 21 to 30 for each of the remaining 8 Patches as they appear. Select Path to EnvSim.act Select the Path to kernel.dll. Select Path to SH5.exe Select Path to SHCollisions.act Select Path to SHSim.act Select Path to SHSound.act Select Path to SH_NClient.dll Set Path to SimData.dll There are 43 actions to install all Patches you should then see all 9 Patcher Files. Picture 15 > Shows all 9 patches correctly installed. If you do not see 9 patches then you have not installed to the right path. Follow the instructions in Picture 16, Picture 16 > Open the Generic Patcher CFG file. Look for the patch with the wrong path and change it manually to the same path as the others. Exit and Save. Picture 17 > Go to File and open. Picture 18 > Shows Patches are installed disabled. Patches can be opened by Double clicking with your mouse. Closes the (GFP) and completes the installation. Other Generic File Patcher Posts maybe of interest Post #3 How To Make Changes In TDW's Generic File Patcher And Run Administrator Post #39 TDW Generic File Patcher Replacing My Old One With A New One! Post #41 TDW's Generic File Patcher Changing The Map Colours Post #56 TDW’s Generic File Patcher Illustrated Settings You Can Use in Yours Post #62 TDW’s Generic File Patcher > Taking A Snapshot > Disabling Patches > Restoring A Snapshot Courtesy acknowledgement to TheDarkWraith
__________________
LSH3-2015 <> TUTORIALS <> ALL YOU NEED TO KNOW <> ALL IN ONE PLACE SH4 <> TUTORIALS <> HOW TO DO IT <> INFORMATION <> DOWNLOAD LINKS SH5 <> TUTORIALS <> HOW TO DO IT <> INFORMATION <> DOWNLOAD LINKS Always Here To Help A Fellow 'Subber' | Need An Answer to A Question Just Send Me A PM Last edited by THEBERBSTER; 11-14-19 at 08:14 PM. Reason: Replaced missing pictures |
03-07-14, 11:30 AM | #3 |
Growing Old Disgracefully
|
How To Make Changes In TDW's Generic File Patcher Part 2
Last updated 11th November 2015
How To Make Changes In TDW's Generic File Patcher (GFP) This Tutorial will also show you how easy it is to run all your Silent Hunter Applications in Administrator Mode 1. Go to the (GFP) Folder GFP168 and open it. (Picture 1R) Picture 1R 2. Open the first folder (File Folder) 3. First folder opened. (Picture 2R) Picture 2R 3. The second folder is your Original Compressed Zip folder. 4. Click on the (GFP) Icon (Mickey Mouse) (Picture 3R) Right Click with your mouse and select Properties. Go to the Compatibility Tab. Go to Privilege Level. Tick the box Run this program as an Administrator. Click Apply. Click Ok. Picture 3R 5. Click on the File Tab. (Picture 4R) 6. Click on the Open Tab.(Picture 4R) If you are using TWOS Select > Restore snapshot. Go to the Snapshot Folder and Double Click with the Mouse on the GPS File and it will Enable the required patches. Picture 4R 7. Accept all Yes prompts as they appear. (Picture 5R) Picture 5R 7. Clicking Yes or No will select the Patchers you will see. 8. If you clicked Yes to all 9 Patcher Files you will see this as in (Picture 6R) Picture 6R 9. Double click a Patcher to open it. 10. You will notice in this Patcher that all the individual Patches are Red as none have been enabled. (Picture 7R) Picture 7R 11. Double click on a Patch to open it. (Picture 8R) Picture 8R 12. Double click on the Change Number to open it. (Picture 9R) Picture 9R 13. Double click on Enabled False. (Picture 10R) Picture 10R 14. Accept any 'Yes' prompts. (Picture 11R) Picture 11R 15. You repeat the action for changing patch numbers 2 and 3. (Picture 12R) Picture 12R 16. 'Check All Dependencies' 17. If there are multiple patches to change and they are in more than one Patcher 'Check All Dependencies' will bring it to your attention that these also need to be changed. 18. When you have finished making your changes. 19. Go to the File Tab. (Picture 13R) 20. Go to Exit. (Picture 13R) Picture 13R 21. All changes are saved. Other Generic File Patcher Posts Post # 2 Installing TDW's Generic File Patcher Post #39 TDW Generic File Patcher Replacing My Old One With A New One! Post #41 TDW's Generic File Patcher Changing The Map Colours Post #56 TDW’s Generic File Patcher Illustrated Settings You Can Use in Yours Post #62 TDW’s Generic File Patcher > Taking A Snapshot > Disabling Patches > Restoring A Snapshot Courtesy acknowledgement to TheDarkWraith
__________________
LSH3-2015 <> TUTORIALS <> ALL YOU NEED TO KNOW <> ALL IN ONE PLACE SH4 <> TUTORIALS <> HOW TO DO IT <> INFORMATION <> DOWNLOAD LINKS SH5 <> TUTORIALS <> HOW TO DO IT <> INFORMATION <> DOWNLOAD LINKS Always Here To Help A Fellow 'Subber' | Need An Answer to A Question Just Send Me A PM Last edited by THEBERBSTER; 10-03-19 at 05:10 PM. Reason: Replaced missing pictures |
03-07-14, 11:38 AM | #4 |
Growing Old Disgracefully
|
JSGME Installing It Correctly
Last updated 25th April 2018
JSGME Installing It correctly The Wolves Of Steel Mega Mod automatically installs this application for you. This application is included in Sobers Subsim Bonus Mega Mod All In One Version1421 20072017 Download JSGME Downmload link. http://www.subsim.com/radioroom/down...o=file&id=4725 Picture 1 > Subsim JSGME Download. Picture 2 > Shows JSGME downloaded into the SH5 Main Game Folder. Picture 3 > Double click on the JSGME Zip File to open it. Picture 4> Click on the Extract Tab. Picture 5 > The path shows the SH5 Main Game Folder. Press OK. Picture 6 > Close the Zip File. Picture 7 > Double click on the JSGME_Setup to start the installation. Picture 8 > Click Next on the Wizard. Picture 9 > Tick “I accept agreement” Picture 10 > Press Next. Picture 11 > Press Next. Picture 12 > The path shows the SH5 Main Game Folder. Press Next. Picture 13 > Tells you it will put the JSGME Icon on your Desk Top. Press Next. Picture 14 > Click on Install. Picture 15 > Tells you about the different languages and how to access them. Click Next. Picture 16 > Untick the (Online) user guide as it only shows an error message. Click Finish. Picture 17 > Double click on the JSGME Icon to open the mod enabler. Picture 18 > Click on OK so the Mods folder can be installed. Picture 19 > Close JSGME. Your game is now ready to accept Mods. Last edited by THEBERBSTER; 04-25-18 at 03:33 AM. Reason: Replaced missing pictures |
03-07-14, 11:41 AM | #5 |
Growing Old Disgracefully
|
Update SH5 From v1.0.5.0 To v1.2.0 Immediately After Installing
Last updated 23rd December 2022
Important information Uplay replaced by Ubisoft Connect Updated Tutorial When the SH5 installation has completed it is important that this is updated to the latest game version v1.2.0 before going any further. Go to the ‘Ubisoft Folder.’ Go to the main ‘Silent Hunter 5 Folder.’ Picture 1 > Shows the SH5.exe application v1.0.5.0 as installed. Picture 2 > Go to the ‘Support Folder’ Picture 3 > Go to the ‘GameUpdater Folder’ Picture 4 > Double click to run the ‘GU Application’ Picture 5 > Yes to start the update Picture 6 > When finished updating confirms the version has changed to v1.2.0 Picture 7 > Shows the 'Connection Error Message' Picture 8 > Use your search engine to find 'Ubisoft Connect & select 'Download for PC' Picture 9 > Start the installation and select your language from the 'Drop Down' arrow Page 10 > Accept the Licence Page 11 > You can use 'Browse' to select a different location to install to (It is not recommended to install in the 'Protected Directory' showing) Page 12 > I am installing in the folder in front of the game folder Page 13 > The location is showing my installation path Page 14 > Installation has completed Press Next Page 15 > Click on 'Finish' to run Ubisoft Connect Page 16 > If this is the first time you have played SH5 you will need to 'Create an Account' If you are re-installing then you will need the Email and Password you used for Uplay Page 17 > You now have a security option which can be skipped Page 18 > Select the 'Games' tab Page 19 > Click on the Silent Hunter 5 game picture Page 20 > Click on 'Update' Picture 21 > Game is synchronising before loading Page 22 > Select your preferred option Page 23 > This picture shows the game has loaded to the 'Main Menu' and shows the correct version Note If you are having a problem with the game loading from the SH5.exe see Picture 24 below the circle is continuously spinning trying to update the game before launching. Click on the x to close the game down and it will exit back o the Desktop. Now load the game from Ubisoft Connect it is quite possible that your game picture is showing an update button and for some reason could not do it from the SH5.exe You can make 'Ubisoft Connect' a Shortcut on your Desktop or Pin it to the Taskbar
__________________
LSH3-2015 <> TUTORIALS <> ALL YOU NEED TO KNOW <> ALL IN ONE PLACE SH4 <> TUTORIALS <> HOW TO DO IT <> INFORMATION <> DOWNLOAD LINKS SH5 <> TUTORIALS <> HOW TO DO IT <> INFORMATION <> DOWNLOAD LINKS Always Here To Help A Fellow 'Subber' | Need An Answer to A Question Just Send Me A PM Last edited by THEBERBSTER; 12-25-22 at 11:27 AM. Reason: Replaced missing pictures |
03-07-14, 11:46 AM | #6 |
Growing Old Disgracefully
|
TDW's Option File Editor Viewer Installing It Correctly
Last updated 1st December 2018
This Tutorial is for installing TDW's Options File Editor Viewer (OFEV) anywhere on your system as a stand alone application only. If a complete uninstall is done the stand alone the OFEV application is unaffected by this. When the re-install is done just follow the instructions from Picture 10 to Picture 14. The OFEV is included in TDW's NewUI's 7-4-2 and 7-5-0 base mods. DO NOT INSTALL THIS STAND ALONE VERSION FOR: The Wolves of Steel (TWoS) Sobers Mega Mod Download Link to > TDW’s Options File Editor Viewer Version_v_1_0_32_0 The Basic way to make changes to the OFEV. 1. Disable the version of TDW’s NewUIs_TDC_7_4_2 or 7_5_0 ByTheDarkWraith Main Mod that you are using from JSGME. 1.1. Disable all TWOS mods in JSGME. 2. Make a New Folder and give it a name and place it in a convenient place that will be easier to find. 3. For the purpose of this Tutorial I will call the New Folder OFEV32. 4. Download the (OFEV) in to the OFEV32 Folder. (Picture 1) Picture 1 5. Open the Zip File. 6. You will see 2 Files. (Picture 2) Picture 2 7. Open the OptionsFileEditorViewer > Application with your mouse. 8. Click on the Extract All Box. (Picture 3) Picture 3 9. You will see from the path showing that it is going to Extract and Copy to the OFEV32 Folder (Picture 4) 10. Click on Extract. (Picture 4) Picture 4 11. (OFEV) > Application exe the Mickey Mouse Icon is now showing. (Picture 5) Picture 5 12. Open the Mickey Mouse .exe Application. 13. You will now get an Error Message. (Picture 6) 14. CFG file missing! Building cfg file! Please restart the App. (Picture 6) Picture 6 15. Click Ok. 16. You will now see the missing cfg file has been added. (Picture 7) Picture 7 17. Open the Mickey Mouse .exe Application. 18. Select your Language (Picture 8) 19. Double click on it to select it. (Picture 8) Picture 8 20. Open the File Tab. (Picture 9) Picture 9 21. Select Set path to menu.txt… (Picture 10) Picture 10 22. Typical looking path could be C:\Ubisoft\Silent Hunter 5\Mods\NewUis_TDC_7_5_0_ByTheDarkWraith\data\Menu (Picture 11) 23. Replace 7-5-0 with 7-4-2 if you are using a different version. 24. Click on Open. (Picture 11) Picture 11 25. Click on the File Tab again. (Picture 12) Picture 12 26. Select Set SH5 install path… (Picture 13) Picture 13 27. Typical looking path could be C:\Ubisoft\Silent Hunter 5 28.Highlight the Silent Hunter 5 Folder by clicking on it Once with your Mouse. (Picture 14) 29. Click on OK. (Picture 14) 30. You can see that the last 2 lines show that both paths have been set correctly. Picture 14 31. Click on the File Tab again. (Picture 15) Picture 15 32. Click on the First Open (Picture 16) Picture 16 33. We now need to find the .py File. 34. Typical looking path could be C:\Ubisoft\Silent Hunter 5\Mods\NewUis_TDC_7_5_0_ByTheDarkWraith\data\Scrip ts\Menu 35. Open the Menu Folder. 36. You will now see TheDarkWraithUserOptions PY File (Picture 17) 37. Double click with your Mouse on the .py File to open it. (Picture 17) Picture 17 38. (OFEV) showing opened. (Picture 18) Picture 18 39. To change the Is patch decks awash installed (Picture 19) 40. Double click on False to open. (Picture 19) Picture 19 41. Click on the True Button and then Accept. (Picture 20) Picture 20 42. You will notice that the False is now True and has changed from Red to the color Blue. (Picture 21) Picture 21 43. To Save any changes go back to the File Tab. 44. And click on Save. (Picture 22) Picture 22 45. Confirm the Save by Pressing Yes. (Picture 23) Picture 23 46. Accept any Further prompts you get. 47. Exit to close and leave the (OFEV) (Picture 24) Picture 24 48. If you now back tothe OFEV32 Folder you will see the (OFEV) File Folder and the original Zipped File there. (Picture 25) Picture 25 49. Open the First File Folder. 50. It is a good idea to change the Mickey Mouse .exe Application to Run as Administrator. 51. Another useful option is either to Make a Desktop Shortcut or alternatively Pin to Taskbar. 52. Open the Mickey Mouse .exe Application. 53. You will now see TheDarkWraithUserOptions > .py File (Picture 17) 54. Double click with your Mouse on the .py File to open it. (See Picture 17) 55. (OFEV) has opened. (See Picture 18) 56. Enable the mods in JSGME. 57. If your game is installed from Steam you cannot enable Decks Awash as it also needs to be enabled in TDW's Generic File Patcher. 58. If playing with Real Navigation some changes made True may still remain Disabled. Courtesy acknowledgement to TheDarkWraith TIP If you shade this Tutorial and then copy and paste it to aNotepad you can then edit it.
__________________
LSH3-2015 <> TUTORIALS <> ALL YOU NEED TO KNOW <> ALL IN ONE PLACE SH4 <> TUTORIALS <> HOW TO DO IT <> INFORMATION <> DOWNLOAD LINKS SH5 <> TUTORIALS <> HOW TO DO IT <> INFORMATION <> DOWNLOAD LINKS Always Here To Help A Fellow 'Subber' | Need An Answer to A Question Just Send Me A PM Last edited by THEBERBSTER; 10-03-19 at 06:06 PM. Reason: Replaced missing pictures |
03-07-14, 11:56 AM | #7 |
Growing Old Disgracefully
|
TDW’s NewUi_ 7_5_0_TheDarkWraith_ version 18 Installing It Correctly
Last updated 22nd April 2018
TDW’s NewUi_ 7_5_0_TheDarkWraith_ version 18 Installing It Correctly This mod more than any other seems to cause a lot of installing problems. I am referring to where one or more Folders hide behind the Folder that is in view. Download Link TheDarkWraith's New UI for SH5 v7.5.0 test version 18 Picture 1 > TDW’s NewUi_ 7_5_0_TheDarkWraith_ version 18 (Current/Latest) is a collection of 15 Mods. Picture 2> To install this mod correctly create a New Folder. Download the Zipped Mod File into the New Folder. Or copy and paste the mod to the New folder if you have already down loaded it. Picture 3 > When you unzip the file you will see this. Click on the Copy Tab to select it Picture 4 > Press OK to confirm you want to Copy it. Now Exit > X. Picture 5 > You now have 2 items in your New Folder. Picture 6 > Open the Folder and you will see 3 File Folders. Dials Folder 1 (Also contains 3 Dial’s Folders and a text ‘Readme’) Mods Folder 2 (Contains the 15 mods) Texts Folder 3 (In various languages shows you how the NewUI is set up) Picture 7 > Open the Mods Folder and you will see the 15 mods. You can copy and paste any additional mods behind the Main Base Mod (No3). If you intend to use Real Navigation make sure this is not over written by any other enabled mod. Picture 8 > Copy and Paste Mod number 3 to your JSGME Mods Folder. Picture 9 > Go to your JSGME Mods Folder and open the NewUi Mod. You should now see this. You can now Enable the Mod in JSGME. Always check Mod’s for additional information in the Text Documents. Important You Now Need To Make The Following Change. In order to receive debug messages from the ship's journal feature of the mod you need to ensure the following Developing is set out below in your: Documents SH5 Data Cfg Main DEVELOPING Change this to Modding=Yes > remove ; ;MenuEditor=Yes ;DebugScripts=Yes Important You Now Need To Make The Following Changes. When using TDW’s NewUI 7-5-0 a change needs to be made in TDW’s Generic File Patcher. Patch 4 showing > Real nav menu.txt entries needs to be enabled (blue) Patch 4 showing > New Game Destroyed Marks (required for TDW UIs mod v7-5-0 and greater) (new_destroyed_marks) needs to be enabled (blue)
__________________
LSH3-2015 <> TUTORIALS <> ALL YOU NEED TO KNOW <> ALL IN ONE PLACE SH4 <> TUTORIALS <> HOW TO DO IT <> INFORMATION <> DOWNLOAD LINKS SH5 <> TUTORIALS <> HOW TO DO IT <> INFORMATION <> DOWNLOAD LINKS Always Here To Help A Fellow 'Subber' | Need An Answer to A Question Just Send Me A PM Last edited by THEBERBSTER; 10-03-19 at 06:11 PM. Reason: Replaced missing pictures |
03-07-14, 12:02 PM | #8 |
Growing Old Disgracefully
|
TDW's NewUI Mod Needs To Be Debugged
Last updated 14th April 2017
If you are going to install one of TDW's NewUI 7-4-2 or 7-5-0 interface mods to your game you need to make a change to one of your files. In order to receive debug messages from the ship's journal feature of the mod you need to ensure the following “Developing” is set out below in your Ubisoft\Silent Hunter 5\data\Cfg\main Ubisoft Silent Hunter 5 Data cfg Main "Developing" Change this to Modding=Yes remove this > ; ;MenuEditor=Yes ;DebugScripts=Yes Courtesy acknowledgement to TheDarkWraith
__________________
LSH3-2015 <> TUTORIALS <> ALL YOU NEED TO KNOW <> ALL IN ONE PLACE SH4 <> TUTORIALS <> HOW TO DO IT <> INFORMATION <> DOWNLOAD LINKS SH5 <> TUTORIALS <> HOW TO DO IT <> INFORMATION <> DOWNLOAD LINKS Always Here To Help A Fellow 'Subber' | Need An Answer to A Question Just Send Me A PM Last edited by THEBERBSTER; 01-17-18 at 05:32 PM. |
03-07-14, 12:05 PM | #9 |
Growing Old Disgracefully
|
JSGME How To Export Your Mod List To A Subsim Post
Last update 5th April 2016
This Tutorial will show you how to Export your Mod List to a Subsim Post or any other chosen destination. 1. Open JSGME. 2. Go to Tasks. (Picture 1) 3. Go to Export Activated Mod List to. (Picture 1) 4. Select Clipboard. (Picture 1) Picture 1 5. Open the Subsim Post where you want to show your Mod List. (Picture 2) 6. Right Click with the Mouse and Select Paste. (Picture 2) Picture 2 7. The Mod List is now showing having been Pasted. (Picture 3) 8. Preview or Press Save Picture 3 9. The Mod List is now showing having been Posted. (Picture 4) Picture 4
__________________
LSH3-2015 <> TUTORIALS <> ALL YOU NEED TO KNOW <> ALL IN ONE PLACE SH4 <> TUTORIALS <> HOW TO DO IT <> INFORMATION <> DOWNLOAD LINKS SH5 <> TUTORIALS <> HOW TO DO IT <> INFORMATION <> DOWNLOAD LINKS Always Here To Help A Fellow 'Subber' | Need An Answer to A Question Just Send Me A PM Last edited by THEBERBSTER; 10-03-19 at 06:16 PM. Reason: Replaced missing pictures |
03-07-14, 12:13 PM | #10 |
Growing Old Disgracefully
|
Deck Gun Crew Testing Using TDW's NewUI
Last updated 16th June 2017
No “Binoculars” were used in these tests. Icons are to be read from the right to left for numbering purposes. 1st Test using “Dieter Epp” Officer on the bridge 1. Give the order to officer on the bridge to > “M.T.D.G. (This will bring the Gun Crew on to the Deck) 2. Watch Officer > Icon 1 3. Battle Stations > Icon 5 4. Crew on Deck > Icon 10 5. M.T.D.G. > Icon 4 (This will already be yellowed) 6. Deck Gun > Icon 8 7. F.A.W. > Icon 9 8. Hold Fire > Icon 8 9. Battle Stations > Icon 5 (Will reposition the Deck Gun properly) 10. Give the order to officer on the bridge to > Secure The Deck Gun. Note 1: The “Battle Station” icon is essential before and after. Note 2: Before the Gun automatically fires there is a slight time delay which can be explained as “Time to receive the order to fire”. Note 3: Do not use F7 Battle Stations. Battle Stations must be from the “Watch Officer” 2nd Test only using the icons from the “Watch Officer” 1. Watch Officer > Icon 1 2. Battle Stations > Icon 5 3. Crew On Deck > Icon 10 4. M.T,D.G. > Icon 4 5. Deck Gun > Icon 8 6. F.A.W. > Icon 9 7. Hold Fire > Icon 8 8. Battle Stations > Icon 5 (This will secure the Deck Gun in the proper position) Notes 1 – 2 – 3 all apply to test 2 Note 4: There is no way to remove the “Deck Gun Crew” from the “Deck Gun” If the officer on the bridge is given the order to “M.T.D.G. and then the order “S.T.D.G. The “Deck Gun” will not be positioned correctly. The “Deck Gun Crew” will normally fire at the nearest target. When this is destroyed they will automatically reposition the “Deck Gun” and start firing at the next nearest target. The “binoculars can be locked on to select the target of your choice using the above instructions. It is not necessary for the “Binoculars to be looking at the target once firing has commenced. Courtesy acknowledgement to TheDarkWraith Tip If you shade this Tutorial and then copy and paste it to your PC Notepad you can then edit it.
__________________
LSH3-2015 <> TUTORIALS <> ALL YOU NEED TO KNOW <> ALL IN ONE PLACE SH4 <> TUTORIALS <> HOW TO DO IT <> INFORMATION <> DOWNLOAD LINKS SH5 <> TUTORIALS <> HOW TO DO IT <> INFORMATION <> DOWNLOAD LINKS Always Here To Help A Fellow 'Subber' | Need An Answer to A Question Just Send Me A PM Last edited by THEBERBSTER; 01-17-18 at 05:33 PM. |
03-07-14, 12:29 PM | #11 |
Growing Old Disgracefully
|
How To Fire The Deck Gun Manually Using TDW'S NewUI
Last updated 31st December 2014
Instructions > How To Fire The Deck Gun Manually. “Main Menu” select “Options” Selecting “Game Play Settings” will change the way the “Deck Gun” operates. No Deck Gun Projectile Path When this Box is Ticked. 1. No Green Gun Sight. 2. No Shell will be seen on the TAI Map No Deck Gun Projectile Path Box Not Ticked 1. Green Gun Sight will be the first Gun Sight showing. 2. Your TAI Map will show where your Shells are falling. It is essential that the “Battle Station” order is given by the Watch Officer Icon 1. If this is not done then the “Deck Gun Crew” will not place the “Deck Gun” in the correct position after leaving it. (Before) You give the orders then either “Walk” or “Teleport” to the “Deck Gun”. 1. Watch Officer > Icon 1 2. Battle Stations > Icon 5 3. Crew On Deck > Icon 10 4. M.T.D.G. > Icon 4 (Or After) You now either “Walk” or “Teleport” to the “Deck Gun” Then give the above orders. When you get to the “Deck Gun” you will see a “Green Gun Sight”. (Depending on your “Game Play Settings). To “Traverse” the gun and “Elevate” it is all done by moving your mouse. There is an annoying glitch that causes you to lose your “Deck Gun Crew”. This happens when the U-boat is pitching up and down. You will notice this when you cannot move the “Deck gun” from side to side. To call the “Deck Gun Crew” back you need to do the following every time this happens. 1. Crew On Deck > Icon 10 2. M.T.D.G. > Icon 4 Leave your “Icons” showing so that you can see them. Any “Yellowed Icon” is active. The second way to fire the “Deck Gun. Click on the “Gun Sight” in the top left corner. This opens the “Standard Gun Sight”. Click on the “Gun Sight” again in the top left corner. This opens up the “High Power Gun Sight” Moving your mouse will move the “Deck Gun” from left to right (Traversing) Using your mouse wheel will raise and lower the “Deck Gun” (Trajectory) There are 3 types of “Ammunition” available. 1. A.P. > Armour Piercing. 2. H.E. > High Explosive. 3. A.A. > Anti Aircraft The amount of “Ammunition” available is shown under each shell. To select the shell type just click on it with your mouse. 1. Place the “Deck Gun Sight Crosshairs” on the target. 2. Adjust the “Elevation” 3. Press the “Space Bar” to “Fire” You will see in the “Message Box” “Gun Loading” If you look at the “Shell” you will see it filling up. You can keep pressing the “Space Bar” down and still move your mouse. The next “Shell” will then “Fire” immediately when the “Deck Gun” has loaded. You will need to learn when to “Fire” so as to take in to account the rise and fall of the u-boat. I would suggest that you test your “Gun Practicing” by going to “Historical Missions” and selecting “Bullet Spark Test” and select “Start”. This will give you 2 Merchants to practice your shooting on. When you have finished “Firing” altogether click on the “Red X” in the “Top Right Corner” You can either “Walk” or “Teleport” back to the “Bridge” To finish 1. Watch Officer > Icon 1 2. Battle Stations > Icon 5 (Yellowed) Using the “Officer on the Bridge” “Dieter Epp” will mess with the “Deck Gun” being placed correctly when you give him the order “Secure The Deck Gun” Courtesy acknowledgement to TheDarkWraith Tip If you shade this Tutorial and then copy and paste it to your PC Notepad you can then edit it.
__________________
LSH3-2015 <> TUTORIALS <> ALL YOU NEED TO KNOW <> ALL IN ONE PLACE SH4 <> TUTORIALS <> HOW TO DO IT <> INFORMATION <> DOWNLOAD LINKS SH5 <> TUTORIALS <> HOW TO DO IT <> INFORMATION <> DOWNLOAD LINKS Always Here To Help A Fellow 'Subber' | Need An Answer to A Question Just Send Me A PM Last edited by THEBERBSTER; 01-17-18 at 05:33 PM. |
03-07-14, 01:24 PM | #12 |
Growing Old Disgracefully
|
How To Change Your Game Play Settings In The Bunker
Last updated 23rd August 2018
How To Change Your Game Play Settings In The Bunker This can be done at any time when you are in the bunker. This cannot be done if you are in the middle of a patrol. 1. Load the Autosave Enter Base game save which will load to the Bunker. 2. Select your mission from the Officer. 3. Press the > Esc key to the Main Menu. 4. Go to > Options. 5. In Game Play Settings tick or un-tick the boxes for the settings you want to see in your game. 6. Apply to save the changes 7. Press the > Esc key. 8. Go to > Save Game. 9. Make a Manual Save by typing in the space at the bottom of the screen. 10. Press > Save 11. Go to > Main Menu. 12. Go to > Load Game. 13. Load the Manual Save you made which will load to the bunker 14. Start your mission Do not upgrade your boat if your game is modded, wait until your are in Kiel.
__________________
LSH3-2015 <> TUTORIALS <> ALL YOU NEED TO KNOW <> ALL IN ONE PLACE SH4 <> TUTORIALS <> HOW TO DO IT <> INFORMATION <> DOWNLOAD LINKS SH5 <> TUTORIALS <> HOW TO DO IT <> INFORMATION <> DOWNLOAD LINKS Always Here To Help A Fellow 'Subber' | Need An Answer to A Question Just Send Me A PM Last edited by THEBERBSTER; 08-23-18 at 02:46 PM. Reason: Revised |
03-07-14, 01:29 PM | #13 |
Growing Old Disgracefully
|
Replacing Steam With A Dvd
Last updated 25th January 2018
Steam needs "Evaporating" get the Dvd if you can or otherwise consider a download version which will be cheaper. With a dvd you actually own it and it is easier to re-install. Before loading the Dvd. Make sure that you leave no trace of Steam on your system. Use a registry cleaner like "Ccleaner" and restart your system afterwards. Go to your start button and use search and check again for any left over SH5. If you find anything delete it and run the registry cleaner again. If you already have a Uplay account play it safe and set up a new one for your new Silent Hunter 5 installation. This will come up at the end of the installation. If you want to play the game with the 'German Voices' then choose the 'Custom' install. After the install go to the following folders. In the path Ubisoft\Silent Hunter 5\Data\Support\GameUpdater There is a "GU" exe application that will update your game to v1.2 Tip If you shade this information and then copy and paste it to your PC Notepad you can then edit it.
__________________
LSH3-2015 <> TUTORIALS <> ALL YOU NEED TO KNOW <> ALL IN ONE PLACE SH4 <> TUTORIALS <> HOW TO DO IT <> INFORMATION <> DOWNLOAD LINKS SH5 <> TUTORIALS <> HOW TO DO IT <> INFORMATION <> DOWNLOAD LINKS Always Here To Help A Fellow 'Subber' | Need An Answer to A Question Just Send Me A PM Last edited by THEBERBSTER; 01-25-18 at 03:46 PM. |
03-07-14, 04:43 PM | #14 |
Swabbie
Join Date: Feb 2014
Posts: 10
Downloads: 22
Uploads: 0
|
Useful tutorials, thanks berbster
|
03-08-14, 04:21 AM | #15 |
Admiral
Join Date: Mar 2007
Posts: 2,200
Downloads: 172
Uploads: 0
|
Amazing work , thank you THEBERBSTER
__________________
What we do in life echoes in Eternity |
|
|