SUBSIM Radio Room Forums



SUBSIM: The Web's #1 resource for all submarine & naval simulations since 1997

Go Back   SUBSIM Radio Room Forums > Silent Hunter 3 - 4 - 5 > Silent Hunter 5
Forget password? Reset here

Reply
 
Thread Tools Display Modes
Old 03-07-14, 11:15 AM   #1
THEBERBSTER
Growing Old Disgracefully
 
THEBERBSTER's Avatar
 
Join Date: Dec 2012
Location: Hythe - Southampton
Posts: 9,607
Downloads: 1132
Uploads: 0


Support SH5 <> TUTORIALS <>HOW TO DO IT <> INFORMATION <> DOWNLOAD LINKS

I am not currently active on the Subsim Forum.
If you have any questions just send me a PM and I will respond within 24 hours.


Information For > SHV <> All Posts Linked <

If you are new to SH5 look at this important information from Sjizzle in the link below in RED before you do anything else.
Read Before Installing any mods or patch with TDW's Generic Patcher

All Download Links > Forum Threads > YouTube Links > Last Checked 30th May 2015

You will find many of the Tutorial Posts come with full pictures and always include written Instructions

Important Information For Windows 10 Problem Solving

Solving Problems In Windows 10 > Undo & Temporarily Prevent Driver Updates > Roll Back Driver < Remove & Replace Driver > Block Driver Update > How To Stop Automatic Driver Updates > Local Group Policy Editor > Registry > Keep Your Drivers Under Control > Internet Pictorial By MUD > Acknowledgement to hauanqua for finding this useful information.

My Tutorials & Game Information For > SH5 <

Page 1

Installing TDW's Generic File Patcher Part 1 > Pictorial > Includes Download Link

How To Make Changes In TDW's Generic File Patcher And Run Administrator Part 2 > Pictorial

JSGME Installing It Correctly > Pictorial

Update SH5 From v1.0.5.0 To v1.2.0 Immediately After Installing > Pictorial > Important Information

TDW's Option File Editor Viewer Installing It Correctly > Pictorial

TDW's NewUi 7-5-0 version 18 Installing It Correctly > Pictorial > Includes Download Link

TDW's NewUI Needs To Be Debugged


JSGME How To Export Your Mod List To A Subsim Post > Pictorial

Deck Gun Crew Testing Using TDW's NewUI

Firing The Deck Gun Manually Using TDW's NewUI

How To Change Your Game Play Settings In The Bunker

Replacing Steam With A Dvd

Page 2

4 Bearing Method By Kuikueg > 4 YouTube Tutorials + Instructions

SH5 Single Play Campaign Progress – Workaround By Vecko

TDW's 9 Patches In The Generic File Patcher (GFP) > Pictorial > Includes Download Link

TDW's NewUi 7-4-2 Installing It Correctly > Pictorial > Includes Download Link

How To Get Fuel With No Re-supply

Crew Commands & Icon Positions For TDW's NewUI

JSGME Mod Validator Instructions

Silent Hunter Mod Validator Instructions

Installing Gramophone Music

Stop Those Circling Torpedoes > Pictorial

Page 3

Beginners Guide To Manual Targeting Fast 90 Degree Attack Setup

Intercepting A Convoy Having Received BDU Radio Message By Stoianm > 3 YouTube Tutorials + Instructions

J.P.C. 45 Degree Method SHV Revised For Tutorial > Pictorial > YouTube Tutorial

TDW Generic File Patcher Replacing My Old One With A New One!

How To Enable Decks Awash > Pictorial

How To Change Map And Tool Colors In TDW's Generic File Patcher (GFP) > Pictorial

Can I Skip The Silent Hunter 5 Tutorial?

Page 4

Draggable Compass Tutorial From TheDarkWraith’s Multiple UI mod By Sonarman.

Why You Should Be Making Manual Saves

Lost Your Bearings? > This Might Just Put You Right

Career History CFG File Why You Need To Make A Copy Of It > Pictorial

TDW’s Generic File Patcher Illustrated Settings You Can Use In Yours > Pictorial

Using The 4 Bearing True Method By Trevally

New Mod For SH5 (RUSTED GLORY) By totheorder

Convoy Hunting For Ships In The Same Row By Stoianm> 4 YouTube Tutorials + Instructions

Convoy Hunting For Ships In The Same Column By Stoianm> 3 YouTube Tutorials + Instructions

Game Play Settings In Silent Hunter 5


Page 5

TDW’s Generic File Patcher > Taking A Snapshot > Disabling Patches > Restoring A Snapshot > Pictorial

How Do I Know Which U-Boat I Have?

Open Horizons II > Campaign Dates > Bases > U-Boats > An Essential Guide

Play Silent Hunter 5 Offline! > Pictorial > Updated Information

How To Use The Free Registry Cleaner 'Ccleaner' > Pictorial > Includes Download Link

What You Can Do When You Finish Your Mission Early In SH5

Run Your SH5.exe Application As An Administrator > Pictorial

Page 6

JSGME Enabling Mods Correctly > Pictorial

Page 7

R.P.M. Hydrophone How To Get The Contact's Speed > Pictorial > YouTube Tutorial

Spare


How To Enable The Periscope Filters > Pictorial

Page 8

U-Jagd Graph For Easy Referencing By Marco1971 > Pictorial

U-Jagd Tutorial For Silent Hunter 5 > YouTube Tutorial > Graph + Instructions

FX_Update_0_0_22_ByTheDarkWraith How To Enable Correctly > Pictorial

How Can I Get A Better Frame Rate In Silent Hunter 5?

Stopwatch By Shmal > Adds a Swastika To The Stopwatch > Picture > Includes Download Link

Can I See My Frame Rate When I am Playing?

Essential Silent Hunter 5 Information For Sobers Mega Mod

How Can I tell What I Need To Do In A Stock Game Campaign?

EQuaTools > Pictures Of All The Tools Available > Pictorial

Moving Steam To A Different Directory

See All 28 Mods In Dynamic Environment v2.9 SH5 + New Additions


Page 9

Captain's Log 0000-00-00 Corruption And How To Correct It > Pictorial

JSGME Saving A Mod Profile Tutorial 1 Of 4 > Pictorial

JSGME Adding A New Mod To A New Position Tutorial 2 Of 4 > Pictorial


Page 10

JSGME How To Move A Mod To A New Position In A Mep File Tutorial 3 Of 4 > Pictorial

JSGME How To Delete/Remove An Overwritten Mod By Using A Mep File Tutorial 4 Of 4 > Pictorial

Various Charts Used In SH5 > Pictorial

Auto TDC Targeting Without Using 3 Circles > Pictorial

Page 11

How To Change Your Game Play Settings in a Mission (Paths Only)

Spare

The RAOBF Wheel In Silent Hunter 5 > 3 YouTube Tutorials + Instructions

TDW’s Generic File Patcher Steam Installation Instructions By sirrawsrsalot > Updated Version

An Easy Way Into Real Navigation > New and Revised > Pictorial

Changing The Crew Voice Files From English To German


Having Difficult With Manual TDC After Using Auto TDC?


Page 12

Fed Up Receiving The “BE MORE AGGRESSIVE” Radio Message

How To Use The Kriegsmarine Grid Numbers
> Pictorial

Clearer Water Visibility Options > Download Link > Enable JSGME

Spare

Page 13

R.S.D. Hydrophone (KDB) Destruction Fix

How To See Contacts > Warships > Merchants > Submarines In The Hydrophone Station > Pictorial

How To Download Mods And Put Them In The Mods Folder

Revised Campaign Fix > New Information From vdr1981 (Vecko)

Page 16

TDW’s Options File Editor Viewer Making Changes Using The Py File > Pictorial

How To Convert Kilometres To Knots.

How To Calculate A Targets Speed By Using The Periscope Cross Hairs

How To Post A Picture To A Subsim Post Part 1 > Using The Picture Viewer > IrfanView > Pictorial

How To Post A Picture To A Subsim Post Part 2 > Using The Uploader > Postimage > Pictorial

Changing The Nvidia GPU Settings > Essential Settings > Pictorial

Changing AMD Radeon GPU Settings > Essential Settings

silentotto > How To Play Any Of The Open Horizon Campaigns > Pictorial

Page 21

GPU Driver Roll Back To A Previous Version > Pictorial

How To Change Your Games Renown > Pictorial

Have You A Font Size Problem With 2560 x 1440 Resolution?

Why Does My 4K TV Show 4K At 60Hz But Only 1440P At 30Hz?

THEBERBSTER'S The Wolves of Steel JSGME Mods Lists With And Without Real Navigation > 100% CTD Free

Page 28

How To Use Speech Recognition MiTons NewUI Editon v0.4.1 English In SH5 > Pictorial

How To Start A New Campaign In SH5 > Pictorial

Air Bases England, Scotland, Northern Ireland Showing Patrol Areas > Pictorial

Override High DPI Scaling Behavior > Pictorial

Orders To The Crew (Not TWoS) Can Be Found Here > Pictorial

How To Use Fat Torpedoes In Silent Hunter 5 > Pictorial

How Too Add Your Captains Name And U-Boat Number To Your Game > Pictorial

Enigma Machine Code Breaking When You Do Not Have The Time > Pictorial

How To Run The SH5.exe As Administrator > Pictorial

Editing [DEVELOPING] When Using TDW's NewUI 7-4-2 And 7-5-0 Versions > Pictorial

How To Send Radio Reports > Pictorial

Download Interruption Fixes > Pictorial

Page 29

Keyboard Changes Needed In The Options File Editor Viewer (OFEV) with Church's SHV 1.01 Keyboard Commands 1.1 Mod > Pictorial

A Pictorial Step By Step Guide Through The Wolves Of Steel (TWOS) Installer > Pictorial

Installing The Options File Editor Viewer (OFEV) In The Wolves Of Steel (TWOS) Mega Mod + Making Changes To Patches Now And Later > Pictorial

You Can Have More Than 1 Silent Hunter 5 Game By Using the MultSH5 Application > Pictorial

Automation! > What Is It? > How Does It Work? > Let’s Check It Out > Pictorial

Automation > How To Assign Hotkeys > Part 1 > Pictorial

Page 30

Automation > How To Assign Hotkeys Part 2 > Pictorial

How To Set Up The Options File Editor Viewer (OFEV) Automation Hotkeys > Pictorial

Different Types Of Keyboards Used In Silent Hunter 5 > Pictorial

German to English Translations Rankings and Submarine Terms In Silent Hunter III & V

Enlarging the SH3 Dials UI for SH5 > Zoom Time Changing > Changing the X and Y Axis > Pictorial > Includes Download Link

A Visual Display And Understanding Of TDW’S Option File Editor Viewer (OFEV) Part 1> Pictorial

A Visual Display And Understanding Of TDW’S Option File Editor Viewer (OFEV) Part 2 > Pictorial

The Wolves of Steel (TWOS) Restore Captains Icons Pack V.2 by JCWolf > Pictorial > Includes Download Link > Enable JSGME

Auto TDC Tutorial Attacking An Escorted Convoy > Pictorial

How To Change Game Play Settings At Sea When On Patrol > Pictorial

Dial Options In Periscope View > Pictorial

Sub Systems German to English Translations Type IIA > Pictorial

Officer Groupings Default And Optional > Pictorial

The Wolves of Steel And Stormy’s DBSM SH5 v1.3 Basemod How To Make It Compatible > Pictorial

Page 31

High Contrast Nav Map With Inverse Shallow Colour By Nisgeis> A Selection Of Different Navigation Map Options To Choose From > Enable JSGME

Spare

How To Re-Install A SH5 DVD Following Uplay’s Update Instructions For TWoS Players > Pictorial

How To Use The Ship’s Journal In Silent Hunter 5 > Pictorial

Black Rectangles Showing On The Menu Screen

Downloads > Mods > Post Links > TWoS Information <

4GB Patch-NTCore Read information before Downloading

4 Ways to Fix Uplay Failed to Start Download Error By TechWhoop

9 SH5 Backed Up Stock Game Files

A Guide to Historical TWoS Gameplay by Cybermat47

Adding Crew Points Wth Silentotto By vdr1981

A Message From TheDarkWraith For Those Who Have The Steam Version Of the Game


All 3d models from Silent Hunter 5: Battle of the Atlantic

Antilag By Kegetys > Curing Lagging > Stutter > Seizures > Manually Set The Frame Rate For Low FPS Problems



Auxiliary Cruiser Guns By Cybermat47 & V13dweller

Binoculars With Bearings By Torpedo V1 > Enable JSGME

Black Screen Problem With Windows 10 Creator Version1703 Using The Windows Trouble Shooter To Fix The Problem

Boogie's Refit for TWoS (Texture Pack) By Boogieman335

Ccleaner Free Registry Cleaner > Includes Download Link > Essential Application When Re-installing Any SH Version

Change Days In Bunker > Enable JSGME

Church's SHV 1.01 Keyboard Commands > Replaces The W-A-S-D Keys > Enable JSGME Last

Clean The Map By Torpedo

Confused About Steam And Uplay When Installing TWoS By boogieman335

Critical Hits v 1.2 For The Deck Gun > Enable JSGME

Das Boot Crew Faces By Conus00 > Enable JSGME

Das_Boot_Crew_Mod_TDW's_NewUIs_TDC_7_5_0_version18 _By_Illyustrator > Enable JSGME

Das Boat Crew Speech > DBSM_Speech_1_0_5

Das Boat Music > DBSM_Music_1_0_5

Das Boot Wolf Weather Cold Depth Mod > By U-190 > Enable JSGME

DeckKannonMatrix > Enable JSGME

Depth_Keeping_Problem_TheDarkWraith > Enable Last JSGME
Not needed if TDW's Generic File Patcher Application is installed.

DirectX 9.0C > Download Link > Essential Application For All SH Versions

DirectX End-User Runtime Web Installer

English Crew Voices By Kevinsue

English Version Speech Fixes And Additions By KarlKoch

Equipment_Upgrades_Fix_v1_4_Patch_1_Hotfix_2 (without date) By Choum > Enable JSGME


External U-Boat Markers by Venatore > TWoS Compatible > Enable JSGME


German Language Mod for The Wolves Of Steel > Enable JSGME

German U-Boat Crew Language Pack By Venatore > Enable JSGME

GIMP GNU Image Manipulation Program

Goblin Editor The Complete Idiots Guide (large image warning)

Goblin Editor To Work In Windows 8.1

Harbour Charts 1.0 By DieReeperbahn

Harbour_Addition_Environment_Enhancement Mod v0.5 for Open Horizons By HansSolo78 > Enable JSGME

HCT_Deutsche U-Boote Theme > Enable JSGME

Historical Torpedo Ranges and Speeds TWoS Tested By Cybermat4

How To Add Additional Crew Speech With 2 Of Stormy's DBSM Mods To Be Compatible With The Wolves of Steel (TWoS) By XenonSurf

How To Add Crew Promotion Points To Your Game By vdr1981

How To Adjust/Change The Crash Dive Depth By Torpedo

How To Edit Sim Files >The Complete Idiots Guide to Goblin Editor (large image warning)

How to Fix 2560x1440 Errors > Download Tool

How to Fix the 0xc000005 Error By thryckz

How To Intercept A Hydrophone Contact By Kylania > YouTube Tutorial


How To Plot An Intercept Course In Silent Hunter 5 The Wolves of Steel (TWoS) By Tonci87 > YouTube Tutorial


How To Plot Latitude And Longitude Using The Nautical Chart In TWoS By Bstanko6 > YouTube Tutorial


How To Make Stormy's DBSM SH5 v1.3 Basemod Compatible With TWoS > Instructions

How To Transfer SH5 From Your Old System To A New One By Sjizzle

How To Transfer SH5 From Your Old System To A New One By Trevally

How To Use: TheDarkWraith .GR2 Editor

How To Use The Enigma Machine In The Wolves Of Steel Tutorial ByTaff In Exile > YouTube Tutorial


How To Use The Patrol Grid Reference Explained By Mobucks & joselillpdl

Hydrophone Tracker v1.1b Tool For 4 Bearings Method By Gutted

Immersive Techniques For The True Subsimmer! By bstank06

Join The Official Subsim Steam Group

JSGME (Jones Soft Generic Mod Enabler)

JSGME Common Errors And Possible Solutions By Mikemike47

JSGME PDF User Guide for the (Jones Soft Generic Mod Enabler)

KDB Hydrophone Depth Destruction Fix

Kriegsmarine Grid Map Atlantic

KSDCommander SH5

Let's learn to use RAOFB wheel in SH5 part 1-4.mkv By Stoianm1 > 4 YouTube Tutorials


Low FPS Try This From GT182


Manual TDC How To Setup Speed & Depth > YouTube Tutorial


Map Contact Colors (Red-Blue-Green) Mod Replaces The Grey Color Ones Used In Mega Mods > Enable JSGME

Mega Mod with MagUI interface "Wolfes From The Deep"

Menu Editor Tutorial By Karamazovnew

Menu Editor Tutorial By Reaper7

MultiSH5

Naights Submarine Textures (interior) > Enable JSGME

New Creaks And Ambience By Kevinsue > Enable JSGME

nVidia missing lights > Enable JSGME > Included In TWOS

New UI's Dirty Periscope Masks By Gap > Enable JSGME

OH II v2.5 Grid Request fix Patch SH5 > Enable JSGME

OHII v2.5_Flag_Wind_Patch > Enable JSGME

One Ship, One Torpedo v1.00 > Enable JSGME

Overlay For TAI and Navigation Maps For SH5 By Shmal > Enable JSGME

Pascal-SH5-Crew-Uniforms_Version 14

Playable U-FlaK for SH5 > Enable JSGME

Real Navigation - Target Motion Analysis Cheat Sheet By palmic

Real Navigation - How To Prepare A Torpedo Attack With Basic Trigonometry By palmic

Real Navigation - Perfectly Controlled Approach By palmic

Real U-Boat Performance - Type VII by vdr1981 > Enable JSGME

Restore The Captain’s Face By Torpedo > Enable JSGME

Reward Points > Oby Explains how the Points system works in SH5 > Renown > Promotion > Morale > Ranking > Value Points

RPM Hydrophone -MOD-SH5 By Macardigan > Enable JSGME

R.S.D. - Reworked Submarine Damage (Updated Version) By vdr1981 > Enable JSGME


RUSTED GLORY SH5 (Mega Mods Compatible)By totheorder > Enable JSGME

RUSTED GLORY SH5 (LIGHTS ONLY) > Enable JSGME

Scapa Flow East Entrance Guide And Maps For Breaking The Fortress By SS Norholm.

SD_MapLocationFix v1 mod by Seeadler
> Enable JSGME

SH Keymapper For SH3-4-5 By jimimadrid

SHValidator_v_2_0_6_0.zip

SH5 Event Camera Default On By U-190

SH 5 TDC Manual TDC Attack On Move With Real Navigation By Pedro J. Gomez > YouTube Tutorial


SH5 Gramophone Shuffler > Enable JSGME

SH5 G7 Torpedoes Historical Textures Pack By U-190

SH5 Mod Guide For Beginners

SH5 No Intro Video By U-190

SH5 Quick Start Guide By Harmsway

SH5 Real Clouds By U-190

SH5: Sink Ship Manually From 20m Depth Using The Hydrophone And Map Plotting By Valkyrie612 > YouTube Tutorial


SH5 Speech Sound Mute FIx By U-190

SH5: TWoS/OHII Singleplay Campaign Progress - Workaround > by vdr1981

Silent CTD Hunter By vdr1981

Silent Hunter 5 Das Boot Style > Das Boot Music > Loading Mission and Main Menu By U-190

Silent Hunter 5 Wolves of Steel - Diveplane Controls By Tonci87 > YouTube Tutorial


Silent Hunter 5 Wolves of Steel - How to plot an intercept course By Tonci87 > YouTube Tutorial


Silent Hunter 5 Wolves of Steel - RAOBF and Attack Disc Tutorial By Tonci87 > YouTube Tutorial


Silent Hunter 5 Tactics & Tips - "How do I?" & FAQ'S! READ IF YOU ARE STUCK

silentmichal's new interior mod (main mod 1.2.4 + patch 1.2.4b > Enable JSGME

SilentMichal’s Radio Room QR1 Changes By TheBeast > Enable JSGME

Silent 3ditor By skwasjer

Silent3Ditor Configurator (S3D-CFG) By Rosomaha

Sobers Subsim Bonus Mega Mod All In One Version 1421 20072017 > Thread (Posts 1-2-3-4-5-6

sobers 7A_B deck crew moved for Shaefer > Enable JSGME

Speech Fixes And Additions English And German Versions > Enable JSGME

Speech Recognition for SH5 By Skwasjer > Enable JSGME

STAINED BEAUTY SH5 By totheorder

Start From Where You Want, At Any Date Tutorial By XenonSurf

Stock Game Default 9 Files Before Installing TDW’s Generic File Patcher

Stock (No Das Boot) Music ForTWoS By vdr1981

Stormys DBSM v1.3

Stormys DBSM SH5 v1.3 Additional Crew Sounds Beta6


Stormys DBSM SH5 v1.3 Hotfix 3

Stormys DBSM SH5 v1.3 Optional Louder Engine Sounds

Stormys DBSM SH5 v1.3 Optional No Magic Skills Mod German Dialogs

TDC Real Navigation Tutorial With 100% Realism by hawaiian_hero (English)

TDW Generic File Patcher > Download Link

TDW_SimData_Patch.s5p Number 9 Patch For the Generic File Patcher > Download Link

TDW Options File Editor Viewer > Download Link

The 4 Bearing Method v1 by Kuikueq > Pictorial

The 4 Bearing Method v2 by Kuikueq > Pictorial

The SH5 Eco Mod By gap > TWoS Compatible > Enable JSGME

The SH5 German Language Patch (Deutscher Sprachpatch) by Raven Corax

The Wolf Pack A Collection Of U-Boat Modelling Articles

The Wolves of Steel (TWoS)_Alternative Campaign Progression > PDF Instructions

The Wolves Of Steel Campaign (TWoS) Campaign Transfer New Information 7th May 2018 > Important New Information

The_Wolves_of_Steel (TwoS) F.A.Q.'s and Gameplay Tips > PDF Instructions

The Wolves of Steel (TWoS) Real Navigation Tutorial By Hawaiian_Hero > YouTube Tutorial


The Wolves of Steel TWoS Remove Compass From Binoculars

The Wolves of Steel (TWoS) Transfer Of External Torpedo Instructions By vdr1981

The Wolves Of Steel (TWoS) DeckGun Friendly Waves Mod > Enable JSGME

The Wolves Of Steel Mega Mod (TWoS) By vdr1981 > Highly Recommended For All SH5 Players

The Wolves Of Steel (TWoS) English Crew Voices By Kevinsue

The Wolves Of Steel (TWoS) German Language Mod > Enable JSGME

The Wolves Of Steel (TWoS) How to Enable Auto TDC Targeting > And How To Test It

The Wolves Of Steel (TWoS) How To Prepare Torpedo Attacks With Basic Trigonometry By Palmic

The Wolves Of Steel Mega Mod TWoS) > How To Enable Map Contacts

The Wolves Of Steel *TWoS) Glass Covers For The SH3 GUI Style Dials Add on Mod By vdr1981 > Enable JSGME


The Wolves of Steel (TWoS) & KSDCommander > PDF Instructions

The Wolves of Steel TWoS) Maintaining Extreme Depth with type VIIC/41 U-boat By vdr1981
> YouTube Tutorial


The Wolves of Steel Updated Installation Instructions (Download PDF) By vdr1981

The Wolves of Steel: Using Options File Editor / Viewer By vdr1981 > YouTube Tutorial


The Wolves of Steel (TWOS) Restore Captains Icons Pack V.2 by JCWolf > See Post#446 For Installation Instructions


UMarks for SH3 and 5 By duckyll

Unscratched Optics for Large Optics v1.4 With Deck Gun Options By LesBaker > Enable JSGME

Unscratched Optics for Large Optics v1.5 With Deck Gun Options By LesBaker > Enable JSGME

Using The 4 Bearing Method While Moving By Tonci87 > YouTube Tutorial


VIIC41 Sub Mod For OHII By ADMIRALTIA

VIIC41 Sub Mod For Stock By thadgar

Why Is It Possible To Mark An X Anywhere On The Map And Have That Represent The Position Of Your U-Boat? By Anton Dvorak

Wolves of Steel Evaluation - Part 1: An Introduction To Real Navigation By Valkrie612 > YouTube Video


Wolves of Steel Evaluation - Part 2: Navigating Your Position By Valkrie612 > YouTube Video



Yes - Wolfpacks are working in SH5 By Trevally

7-Zip > Essential Application For Downloading Mods And Applications


Das Boot Theme - Guitar Cover > YouTube Video


STEAM Problem Fixes Section
STEAM > A Comprehensive Guide To Installing > By propbeanie

STEAM More Useful Information From propbeanie

Steam Application Loading Error Fix By Cyborg322

Steam Problems With TDW’s Generic File Patcher Check Out Installing An XP Virtual Machine For Any Windows OS


Z

Courtesy acknowledgement to vdr1981 (Vecko) and all other contributors who have helped to make this Tutorial thread worthwhile.

TIP > Shade the text > Copy & Paste and save to a Notepad on your PC = Hard Copy

Need answers to questions. > Just send me a PM and I will do my best to help you.

NOOB questions answered willingly.

Looking for a mod you cannot find then maybe I can help you from my large mod collection > PM me.

Dock the Stock > Come On Board With Mods > With Help From TheBerbster


This 'Central Hub' has been created to answer frequently asked questions that appear on the 'Forum' Good Hunting Peter

Please report any 'Download Links' not working.

Last edited by THEBERBSTER; 05-28-24 at 08:06 AM.
THEBERBSTER is offline   Reply With Quote
Old 03-07-14, 11:22 AM   #2
THEBERBSTER
Growing Old Disgracefully
 
THEBERBSTER's Avatar
 
Join Date: Dec 2012
Location: Hythe - Southampton
Posts: 9,607
Downloads: 1132
Uploads: 0


Default Installing TDW's Generic File Patcher Part 1

Last updated 14th November 2019
This Tutorial is for installing TDW's Generic File Patcher (GFP) anywhere on your system as a stand alone application.

If a complete uninstall is done the stand alone GFP application is unaffected by this.
When the re-install is done just reconnect the GFP Patches to the SH5 Folder again.


DO NOT INSTALL THIS STAND ALONE VERSION FOR:
The Wolves of Steel (TWoS)
Sobers Mega Mod

Link to the (GFP).
http://www.subsim.com/radioroom/showthread.php?t=181433

Do Not put the GFP in JSGME or in any Silent Hunter 5 folder.

It is recommended that you backup the 9 original files below that are in your Silent Hunter 5 Main Folder by Copying and Pasting them to a New Folder in the Ubisoft folder. (Picture 2)

Likely looking Main Folder Path. C:\Ubisoft\Silent Hunter 5


1. Cameramanager.act
2. EnvSim.act
3. SimData.dll
4. Kernel.dll
5. Sh5.exe
6. SHCollisions.act
7. SHSim.act
8. SHSound.act
9. SH_NClient.dll

Picture 1 >
Shows original files when backed up in a folder.


Picture 2 > Ubisoft folder behind the main game folder.


Picture 3 > GFP168 folder.


Picture 4 >Download the (GFP) in to the GFP168 Folder.


Picture 5 > Open the Zip File and click on the Extract Tab.


Picture 6 > Click Ok to confirm.


Picture 7 > Shows the 8 files extracted to the GFP168 folder.


Picture 8 > X to exit.


Picture 9 > Start the application by double clicking on the Mickey Mouse icon.


Picture 10 > Select your language and double click on it. Selecting the Language takes you to this next screen.


Picture 11 > Opens to this screen.
Click on File.


Picture 12 > Open.


Picture 13 > Select the file path to your Silent Hunter 5 game folder.


Select Path to CameraManager.act. < First Patch.

Computer.

Drive C:

Ubisoft folder

Picture 14 > Silent Hunter 5 (Highlight folder only DO NOT OPEN).


Click on OK.

Repeat the instructions from 21 to 30 for each of the remaining 8 Patches as they appear.

Select Path to EnvSim.act

Select the Path to kernel.dll.

Select Path to SH5.exe

Select Path to SHCollisions.act

Select Path to SHSim.act

Select Path to SHSound.act

Select Path to SH_NClient.dll

Set Path to SimData.dll

There are 43 actions to install all Patches you should then see all 9 Patcher Files.


Picture 15 > Shows all 9 patches correctly installed.


If you do not see 9 patches then you have not installed to the right path.
Follow the instructions in Picture 16,

Picture 16 > Open the Generic Patcher CFG file.
Look for the patch with the wrong path and change it manually to the same path as the others.
Exit and Save.


Picture 17 > Go to File and open.


Picture 18 > Shows Patches are installed disabled.


Patches can be opened by Double clicking with your mouse.

Closes the (GFP) and completes the installation.

Other Generic File Patcher Posts maybe of interest

Post #3 How To Make Changes In TDW's Generic File Patcher And Run Administrator

Post #39 TDW Generic File Patcher Replacing My Old One With A New One!

Post #41 TDW's Generic File Patcher Changing The Map Colours

Post #56 TDW’s Generic File Patcher Illustrated Settings You Can Use in Yours

Post #62 TDW’s Generic File Patcher > Taking A Snapshot > Disabling Patches > Restoring A Snapshot

Courtesy acknowledgement to TheDarkWraith

Last edited by THEBERBSTER; 11-14-19 at 08:14 PM. Reason: Replaced missing pictures
THEBERBSTER is offline   Reply With Quote
Old 03-07-14, 11:30 AM   #3
THEBERBSTER
Growing Old Disgracefully
 
THEBERBSTER's Avatar
 
Join Date: Dec 2012
Location: Hythe - Southampton
Posts: 9,607
Downloads: 1132
Uploads: 0


Default How To Make Changes In TDW's Generic File Patcher Part 2

Last updated 11th November 2015

How To Make Changes In TDW's Generic File Patcher (GFP)

This Tutorial will also show you how easy it is to run all your Silent Hunter Applications in Administrator Mode

1. Go to the (GFP) Folder GFP168 and open it. (Picture 1R)

Picture 1R


2. Open the first folder (File Folder)

3. First folder opened. (Picture 2R)

Picture 2R


3. The second folder is your Original Compressed Zip folder.

4. Click on the (GFP) Icon (Mickey Mouse) (Picture 3R)
Right Click with your mouse and select Properties.
Go to the Compatibility Tab.
Go to Privilege Level.
Tick the box Run this program as an Administrator.
Click Apply.
Click Ok.

Picture 3R


5. Click on the File Tab. (Picture 4R)

6. Click on the Open Tab.(Picture 4R)

If you are using TWOS Select > Restore snapshot.

Go to the Snapshot Folder and Double Click with the Mouse on the GPS File and it will Enable the required patches.


Picture 4R


7. Accept all Yes prompts as they appear. (Picture 5R)

Picture 5R


7. Clicking Yes or No will select the Patchers you will see.

8. If you clicked Yes to all 9 Patcher Files you will see this as in (Picture 6R)

Picture 6R


9. Double click a Patcher to open it.

10. You will notice in this Patcher that all the individual Patches are Red as none have been enabled.
(Picture 7R)

Picture 7R


11. Double click on a Patch to open it. (Picture 8R)

Picture 8R


12. Double click on the Change Number to open it. (Picture 9R)

Picture 9R


13. Double click on Enabled False. (Picture 10R)

Picture 10R


14. Accept any 'Yes' prompts. (Picture 11R)

Picture 11R


15. You repeat the action for changing patch numbers 2 and 3. (Picture 12R)

Picture 12R


16. 'Check All Dependencies'

17. If there are multiple patches to change and they are in more than one Patcher 'Check All Dependencies' will bring it to your attention that these also need to be changed.


18. When you have finished making your changes.

19. Go to the File Tab. (Picture 13R)

20. Go to Exit. (Picture 13R)

Picture 13R


21. All changes are saved.

Other Generic File Patcher Posts

Post # 2 Installing TDW's Generic File Patcher

Post #39 TDW Generic File Patcher Replacing My Old One With A New One!

Post #41 TDW's Generic File Patcher Changing The Map Colours

Post #56 TDW’s Generic File Patcher Illustrated Settings You Can Use in Yours

Post #62 TDW’s Generic File Patcher > Taking A Snapshot > Disabling Patches > Restoring A Snapshot

Courtesy acknowledgement to TheDarkWraith


Last edited by THEBERBSTER; 10-03-19 at 05:10 PM. Reason: Replaced missing pictures
THEBERBSTER is offline   Reply With Quote
Old 03-07-14, 11:38 AM   #4
THEBERBSTER
Growing Old Disgracefully
 
THEBERBSTER's Avatar
 
Join Date: Dec 2012
Location: Hythe - Southampton
Posts: 9,607
Downloads: 1132
Uploads: 0


Default JSGME Installing It Correctly

Last updated 25th April 2018

JSGME Installing It correctly

The Wolves Of Steel Mega Mod automatically installs this application for you.

This application is included in Sobers Subsim Bonus Mega Mod All In One Version1421 20072017 Download

JSGME Downmload link.
http://www.subsim.com/radioroom/down...o=file&id=4725

Picture 1 > Subsim JSGME Download.


Picture 2 > Shows JSGME downloaded into the SH5 Main Game Folder.


Picture 3 > Double click on the JSGME Zip File to open it.


Picture 4> Click on the Extract Tab.


Picture 5 > The path shows the SH5 Main Game Folder.
Press OK.


Picture 6 > Close the Zip File.


Picture 7 > Double click on the JSGME_Setup to start the installation.


Picture 8 > Click Next on the Wizard.


Picture 9 > Tick “I accept agreement”


Picture 10 > Press Next.


Picture 11 > Press Next.


Picture 12 > The path shows the SH5 Main Game Folder.
Press Next.


Picture 13 > Tells you it will put the JSGME Icon on your Desk Top.
Press Next.


Picture 14 > Click on Install.


Picture 15 > Tells you about the different languages and how to access them.
Click Next.


Picture 16 > Untick the (Online) user guide as it only shows an error message.
Click Finish.


Picture 17 > Double click on the JSGME Icon to open the mod enabler.


Picture 18 > Click on OK so the Mods folder can be installed.


Picture 19 > Close JSGME.


Your game is now ready to accept Mods.

Last edited by THEBERBSTER; 04-25-18 at 03:33 AM. Reason: Replaced missing pictures
THEBERBSTER is offline   Reply With Quote
Old 03-07-14, 11:41 AM   #5
THEBERBSTER
Growing Old Disgracefully
 
THEBERBSTER's Avatar
 
Join Date: Dec 2012
Location: Hythe - Southampton
Posts: 9,607
Downloads: 1132
Uploads: 0


Default Update SH5 From v1.0.5.0 To v1.2.0 Immediately After Installing

Last updated 23rd December 2022
Important information Uplay replaced by Ubisoft Connect
Updated Tutorial

When the SH5 installation has completed it is important that this is updated to the latest game version v1.2.0 before going any further.
Go to the ‘Ubisoft Folder.’
Go to the main ‘Silent Hunter 5 Folder.’

Picture 1 > S
hows the SH5.exe application v1.0.5.0 as installed.


Picture 2 > Go to the ‘Support Folder’


Picture 3 >
Go to the ‘GameUpdater Folder’


Picture 4 >
Double click to run the ‘GU Application’


Picture 5 >
Yes to start the update


Picture 6 >
When finished updating confirms the version has changed to v1.2.0


Picture 7 > Shows the 'Connection Error Message'


Picture 8 > Use your search engine to find 'Ubisoft Connect & select 'Download for PC'


Picture 9 > Start the installation and select your language from the 'Drop Down' arrow


Page 10 > Accept the Licence


Page 11 > You can use 'Browse' to select a different location to install to (It is not recommended to install in the 'Protected Directory' showing)


Page 12 > I am installing in the folder in front of the game folder


Page 13 > The location is showing my installation path


Page 14 > Installation has completed Press Next


Page 15 > Click on 'Finish' to run Ubisoft Connect


Page 16 > If this is the first time you have played SH5 you will need to 'Create an Account'
If you are re-installing then you will need the Email and Password you used for Uplay


Page 17 > You now have a security option which can be skipped


Page 18 > Select the 'Games' tab


Page 19 > Click on the Silent Hunter 5 game picture


Page 20 > Click on 'Update'


Picture 21 > Game is synchronising before loading


Page 22 > Select your preferred option


Page 23 > This picture shows the game has loaded to the 'Main Menu' and shows the correct version


Note
If you are having a problem with the game loading from the SH5.exe see Picture 24 below the circle is continuously spinning trying to update the game before launching.
Click on the x to close the game down and it will exit back o the Desktop.
Now load the game from Ubisoft Connect it is quite possible that your game picture is showing an update button and for some reason could not do it from the SH5.exe


You can make 'Ubisoft Connect' a Shortcut on your Desktop or Pin it to the Taskbar

Last edited by THEBERBSTER; 12-25-22 at 11:27 AM. Reason: Replaced missing pictures
THEBERBSTER is offline   Reply With Quote
Old 03-07-14, 11:46 AM   #6
THEBERBSTER
Growing Old Disgracefully
 
THEBERBSTER's Avatar
 
Join Date: Dec 2012
Location: Hythe - Southampton
Posts: 9,607
Downloads: 1132
Uploads: 0


Default TDW's Option File Editor Viewer Installing It Correctly

Last updated 1st December 2018
This Tutorial is for installing TDW's Options File Editor Viewer (OFEV) anywhere on your system as a stand alone application only.

If a complete uninstall is done the stand alone the OFEV application is unaffected by this.
When the re-install is done just follow the instructions from Picture 10 to Picture 14.


The OFEV is included in TDW's NewUI's 7-4-2 and 7-5-0 base mods.

DO NOT INSTALL THIS STAND ALONE VERSION FOR:
The Wolves of Steel (TWoS)
Sobers Mega Mod

Download Link to > TDW’s Options File Editor Viewer Version_v_1_0_32_0

The Basic way to make changes to the OFEV.
1. Disable the version of TDW’s NewUIs_TDC_7_4_2 or 7_5_0 ByTheDarkWraith Main Mod that you are using from JSGME.

1.1. Disable all TWOS mods in JSGME.

2. Make a New Folder and give it a name and place it in a convenient place that will be easier to find.

3. For the purpose of this Tutorial I will call the New Folder OFEV32.

4. Download the (OFEV) in to the OFEV32 Folder. (Picture 1)

Picture 1



5. Open the Zip File.


6. You will see 2 Files. (Picture 2)

Picture 2



7. Open the OptionsFileEditorViewer > Application with your mouse.


8. Click on the Extract All Box. (Picture 3)

Picture 3



9. You will see from the path showing that it is going to Extract and Copy to the OFEV32 Folder (Picture 4)


10. Click on Extract. (Picture 4)

Picture 4


11. (OFEV) > Application exe the Mickey Mouse Icon is now showing. (Picture 5)


Picture 5



12. Open the Mickey Mouse .exe Application.


13. You will now get an Error Message. (Picture 6)

14. CFG file missing! Building cfg file! Please restart the App. (Picture 6)

Picture 6


15. Click Ok.


16. You will now see the missing cfg file has been added. (Picture 7)

Picture 7


17. Open the Mickey Mouse .exe Application.


18. Select your Language (Picture 8)

19. Double click on it to select it. (Picture 8)

Picture 8


20. Open the File Tab. (Picture 9)


Picture 9


21. Select Set path to menu.txt… (Picture 10)


Picture 10


22. Typical looking path could be C:\Ubisoft\Silent Hunter 5\Mods\NewUis_TDC_7_5_0_ByTheDarkWraith\data\Menu (Picture 11)


23. Replace 7-5-0 with 7-4-2 if you are using a different version.

24. Click on Open. (Picture 11)

Picture 11


25. Click on the File Tab again. (Picture 12)


Picture 12


26. Select Set SH5 install path… (Picture 13)


Picture 13


27. Typical looking path could be C:\Ubisoft\Silent Hunter 5


28.Highlight the Silent Hunter 5 Folder by clicking on it Once with your Mouse. (Picture 14)

29. Click on OK. (Picture 14)

30. You can see that the last 2 lines show that both paths have been set correctly.

Picture 14


31. Click on the File Tab again. (Picture 15)


Picture 15



32. Click on the First Open (Picture 16)


Picture 16


33. We now need to find the .py File.


34. Typical looking path could be C:\Ubisoft\Silent Hunter 5\Mods\NewUis_TDC_7_5_0_ByTheDarkWraith\data\Scrip ts\Menu

35. Open the Menu Folder.

36. You will now see TheDarkWraithUserOptions PY File (Picture 17)

37. Double click with your Mouse on the .py File to open it. (Picture 17)

Picture 17


38. (OFEV) showing opened. (Picture 18)

Picture 18


39. To change the Is patch decks awash installed (Picture 19)


40. Double click on False to open. (Picture 19)

Picture 19



41. Click on the True Button and then Accept. (Picture 20)


Picture 20


42. You will notice that the False is now True and has changed from Red to the color Blue. (Picture 21)


Picture 21


43. To Save any changes go back to the File Tab.


44. And click on Save. (Picture 22)

Picture 22


45. Confirm the Save by Pressing Yes. (Picture 23)


Picture 23


46.
Accept any Further prompts you get.

47. Exit to close and leave the (OFEV) (Picture 24)

Picture 24


48. If you now back tothe OFEV32 Folder you will see the (OFEV) File Folder and the original Zipped File there. (Picture 25)


Picture 25


49. Open the First File Folder.


50. It is a good idea to change the Mickey Mouse .exe Application to Run as Administrator.

51. Another useful option is either to Make a Desktop Shortcut or alternatively Pin to Taskbar.

52. Open the Mickey Mouse .exe Application.

53. You will now see TheDarkWraithUserOptions > .py File (Picture 17)

54. Double click with your Mouse on the .py File to open it. (See Picture 17)

55. (OFEV) has opened. (See Picture 18)

56. Enable the mods in JSGME.

57. If your game is installed from Steam you cannot enable Decks Awash as it also needs to be enabled in TDW's Generic File Patcher.

58. If playing with Real Navigation some changes made True may still remain Disabled.

Courtesy acknowledgement to TheDarkWraith

TIP
If you shade this Tutorial and then copy and paste it to aNotepad you can then edit it.


Last edited by THEBERBSTER; 10-03-19 at 06:06 PM. Reason: Replaced missing pictures
THEBERBSTER is offline   Reply With Quote
Old 03-07-14, 11:56 AM   #7
THEBERBSTER
Growing Old Disgracefully
 
THEBERBSTER's Avatar
 
Join Date: Dec 2012
Location: Hythe - Southampton
Posts: 9,607
Downloads: 1132
Uploads: 0


Default TDW’s NewUi_ 7_5_0_TheDarkWraith_ version 18 Installing It Correctly

Last updated 22nd April 2018

TDW’s NewUi_ 7_5_0_TheDarkWraith_ version 18 Installing It Correctly

This mod more than any other seems to cause a lot of installing problems.
I am referring to where one or more Folders hide behind the Folder that is in view.

Download Link TheDarkWraith's New UI for SH5 v7.5.0 test version 18

Picture 1 > TDW’s NewUi_ 7_5_0_TheDarkWraith_ version 18 (Current/Latest) is a collection of 15 Mods.


Picture 2> To install this mod correctly create a New Folder.
Download the Zipped Mod File into the New Folder.
Or copy and paste the mod to the New folder if you have already down loaded it.


Picture 3 > When you unzip the file you will see this.
Click on the Copy Tab to select it


Picture 4 > Press OK to confirm you want to Copy it.
Now Exit > X.


Picture 5 > You now have 2 items in your New Folder.


Picture 6 > Open the Folder and you will see 3 File Folders.
Dials Folder 1 (Also contains 3 Dial’s Folders and a text ‘Readme’)
Mods Folder 2 (Contains the 15 mods)
Texts Folder 3 (In various languages shows you how the NewUI is set up)


Picture 7 > Open the Mods Folder and you will see the 15 mods.
You can copy and paste any additional mods behind the Main Base Mod (No3).
If you intend to use Real Navigation make sure this is not over written by any other enabled mod.



Picture 8 > Copy and Paste Mod number 3 to your JSGME Mods Folder.



Picture 9 > Go to your JSGME Mods Folder and open the NewUi Mod.

You should now see this.
You can now Enable the Mod in JSGME.


Always check Mod’s for additional information in the Text Documents.

Important You Now Need To Make The Following Change.
In order to receive debug messages from the ship's journal feature of the mod you need to ensure the following Developing is set out below in your:

Documents
SH5
Data
Cfg
Main

DEVELOPING Change this to
Modding=Yes > remove ;
;MenuEditor=Yes
;DebugScripts=Yes

Important You Now Need To Make The Following Changes.
When using TDW’s NewUI 7-5-0 a change needs to be made in TDW’s Generic File Patcher.
Patch 4 showing > Real nav menu.txt entries needs to be enabled (blue)
Patch 4 showing > New Game Destroyed Marks (required for TDW UIs mod v7-5-0 and greater) (new_destroyed_marks) needs to be enabled (blue)


Last edited by THEBERBSTER; 10-03-19 at 06:11 PM. Reason: Replaced missing pictures
THEBERBSTER is offline   Reply With Quote
Old 03-07-14, 12:02 PM   #8
THEBERBSTER
Growing Old Disgracefully
 
THEBERBSTER's Avatar
 
Join Date: Dec 2012
Location: Hythe - Southampton
Posts: 9,607
Downloads: 1132
Uploads: 0


Default TDW's NewUI Mod Needs To Be Debugged

Last updated 14th April 2017

If you are going to install one of TDW's NewUI 7-4-2 or 7-5-0 interface mods to your game you need to make a change to one of your files.
In order to receive debug messages from the ship's journal feature of the mod you need to ensure the following “Developing” is set out below in your Ubisoft\Silent Hunter 5\data\Cfg\main

Ubisoft
Silent Hunter 5
Data
cfg
Main

"Developing" Change this to
Modding=Yes remove this > ;
;MenuEditor=Yes
;DebugScripts=Yes


Courtesy acknowledgement to TheDarkWraith


Last edited by THEBERBSTER; 01-17-18 at 05:32 PM.
THEBERBSTER is offline   Reply With Quote
Old 03-07-14, 12:05 PM   #9
THEBERBSTER
Growing Old Disgracefully
 
THEBERBSTER's Avatar
 
Join Date: Dec 2012
Location: Hythe - Southampton
Posts: 9,607
Downloads: 1132
Uploads: 0


Default JSGME How To Export Your Mod List To A Subsim Post

Last update 5th April 2016

This Tutorial will show you how to Export your Mod List to a Subsim Post or any other chosen destination.

1. Open JSGME.

2. Go to Tasks. (Picture 1)

3. Go to Export Activated Mod List to. (Picture 1)

4. Select Clipboard. (Picture 1)

Picture 1


5. Open the Subsim Post where you want to show your Mod List. (Picture 2)


6. Right Click with the Mouse and Select Paste. (Picture 2)

Picture 2


7. The Mod List is now showing having been Pasted. (Picture 3)

8. Preview or Press Save

Picture 3


9. The Mod List is now showing having been Posted. (Picture 4)

Picture 4

Last edited by THEBERBSTER; 10-03-19 at 06:16 PM. Reason: Replaced missing pictures
THEBERBSTER is offline   Reply With Quote
Old 03-07-14, 12:13 PM   #10
THEBERBSTER
Growing Old Disgracefully
 
THEBERBSTER's Avatar
 
Join Date: Dec 2012
Location: Hythe - Southampton
Posts: 9,607
Downloads: 1132
Uploads: 0


Default Deck Gun Crew Testing Using TDW's NewUI

Last updated 16th June 2017

No “Binoculars” were used in these tests.

Icons are to be read from the right to left for numbering purposes.

1st Test using “Dieter Epp” Officer on the bridge

1. Give the order to officer on the bridge to > “M.T.D.G. (This will bring the Gun Crew on to the Deck)


2. Watch Officer > Icon 1

3. Battle Stations > Icon 5

4. Crew on Deck > Icon 10

5. M.T.D.G. > Icon 4 (This will already be yellowed)

6. Deck Gun > Icon 8

7. F.A.W. > Icon 9

8. Hold Fire > Icon 8

9. Battle Stations > Icon 5 (Will reposition the Deck Gun properly)

10. Give the order to officer on the bridge to > Secure The Deck Gun.

Note 1: The “Battle Station” icon is essential before and after.

Note 2: Before the Gun automatically fires there is a slight time delay
which can be explained as “Time to receive the order to fire”.

Note 3: Do not use F7 Battle Stations. Battle Stations must be from the “Watch Officer”



2nd Test only using the icons from the “Watch Officer”

1. Watch Officer > Icon 1

2. Battle Stations > Icon 5

3. Crew On Deck > Icon 10

4. M.T,D.G. > Icon 4

5. Deck Gun > Icon 8

6. F.A.W. > Icon 9

7. Hold Fire > Icon 8

8. Battle Stations > Icon 5 (This will secure the Deck Gun in the proper position)

Notes 1 – 2 – 3 all apply to test 2

Note 4: There is no way to remove the “Deck Gun Crew” from the “Deck Gun”

If the officer on the bridge is given the order to “M.T.D.G. and then the order “S.T.D.G. The “Deck Gun” will not be positioned correctly.

The “Deck Gun Crew” will normally fire at the nearest target. When this is destroyed they will automatically reposition the “Deck Gun” and start firing at the next nearest target. The “binoculars can be locked on to select the target of your choice using the above instructions. It is not necessary for the “Binoculars to be looking at the target once firing has commenced.


Courtesy acknowledgement to TheDarkWraith

Tip
If you shade this Tutorial and then copy and paste it to your PC Notepad you can then edit it.

Last edited by THEBERBSTER; 01-17-18 at 05:33 PM.
THEBERBSTER is offline   Reply With Quote
Old 03-07-14, 12:29 PM   #11
THEBERBSTER
Growing Old Disgracefully
 
THEBERBSTER's Avatar
 
Join Date: Dec 2012
Location: Hythe - Southampton
Posts: 9,607
Downloads: 1132
Uploads: 0


Default How To Fire The Deck Gun Manually Using TDW'S NewUI

Last updated 31st December 2014

Instructions > How To Fire The Deck Gun Manually.

“Main Menu” select “Options”

Selecting “Game Play Settings” will change the way the “Deck Gun” operates.

No Deck Gun Projectile Path

When this Box is Ticked.

1. No Green Gun Sight.


2. No Shell will be seen on the TAI Map

No Deck Gun Projectile Path

Box Not Ticked

1. Green Gun Sight will be the first Gun Sight showing.


2. Your TAI Map will show where your Shells are falling.

It is essential that the “Battle Station” order is given by the Watch Officer Icon 1.

If this is not done then the “Deck Gun Crew” will not place the “Deck Gun” in the correct position after leaving it.

(Before) You give the orders then either “Walk” or “Teleport” to the “Deck Gun”.

1. Watch Officer > Icon 1


2. Battle Stations > Icon 5


3. Crew On Deck > Icon 10


4. M.T.D.G. > Icon 4

(Or After) You now either “Walk” or “Teleport” to the “Deck Gun”

Then give the above orders.

When you get to the “Deck Gun” you will see a “Green Gun Sight”. (Depending on your “Game Play Settings).

To “Traverse” the gun and “Elevate” it is all done by moving your mouse.

There is an annoying glitch that causes you to lose your “Deck Gun Crew”. This happens when the U-boat is pitching up and down. You will notice this when you cannot move the “Deck gun” from side to side.

To call the “Deck Gun Crew” back you need to do the following every time this happens.

1. Crew On Deck > Icon 10


2. M.T.D.G. > Icon 4

Leave your “Icons” showing so that you can see them.

Any “Yellowed Icon” is active.



The second way to fire the “Deck Gun.

Click on the “Gun Sight” in the top left corner.

This opens the “Standard Gun Sight”.

Click on the “Gun Sight” again in the top left corner.

This opens up the “High Power Gun Sight

Moving your mouse will move the “Deck Gun” from left to right (Traversing)

Using your mouse wheel will raise and lower the “Deck Gun” (Trajectory)

There are 3 types of “Ammunition” available.

1. A.P. > Armour Piercing.


2. H.E. > High Explosive.


3. A.A. > Anti Aircraft


The amount of “Ammunition” available is shown under each shell.

To select the shell type just click on it with your mouse.

1. Place the “Deck Gun Sight Crosshairs” on the target.


2. Adjust the “Elevation”


3. Press the “Space Bar” to “Fire”

You will see in the “Message Box” “Gun Loading”

If you look at the “Shell” you will see it filling up.

You can keep pressing the “Space Bar” down and still move your mouse.

The next “Shell” will then “Fire” immediately when the “Deck Gun” has loaded.

You will need to learn when to “Fire” so as to take in to account the rise and fall of the u-boat.

I would suggest that you test your “Gun Practicing” by going to “Historical Missions” and selecting “Bullet Spark Test” and select “Start”.

This will give you 2 Merchants to practice your shooting on.

When you have finished “Firing” altogether click on the “Red X” in the “Top Right Corner”

You can either “Walk” or “Teleport” back to the “Bridge”

To finish

1. Watch Officer > Icon 1


2. Battle Stations > Icon 5 (Yellowed)

Using the “Officer on the Bridge” “Dieter Epp” will mess with the “Deck Gun” being placed correctly when you give him the order “Secure The Deck Gun”


Courtesy acknowledgement to TheDarkWraith

Tip
If you shade this Tutorial and then copy and paste it to your PC Notepad you can then edit it.

Last edited by THEBERBSTER; 01-17-18 at 05:33 PM.
THEBERBSTER is offline   Reply With Quote
Old 03-07-14, 01:24 PM   #12
THEBERBSTER
Growing Old Disgracefully
 
THEBERBSTER's Avatar
 
Join Date: Dec 2012
Location: Hythe - Southampton
Posts: 9,607
Downloads: 1132
Uploads: 0


Default How To Change Your Game Play Settings In The Bunker

Last updated 23rd August 2018
How To Change Your Game Play Settings In The Bunker
This can be done at any time when you are in the bunker.
This cannot be done if you are in the middle of a patrol.

1. Load the Autosave Enter Base game save which will load to the Bunker.
2. Select your mission from the Officer.
3. Press the > Esc key to the Main Menu.
4. Go to > Options.
5. In Game Play Settings tick or un-tick the boxes for the settings you want to see in your game.
6. Apply to save the changes
7. Press the > Esc key.
8. Go to > Save Game.
9. Make a Manual Save by typing in the space at the bottom of the screen.
10. Press > Save
11. Go to > Main Menu.
12. Go to > Load Game.
13. Load the Manual Save you made which will load to the bunker
14. Start your mission
Do not upgrade your boat if your game is modded, wait until your are in Kiel.

Last edited by THEBERBSTER; 08-23-18 at 02:46 PM. Reason: Revised
THEBERBSTER is offline   Reply With Quote
Old 03-07-14, 01:29 PM   #13
THEBERBSTER
Growing Old Disgracefully
 
THEBERBSTER's Avatar
 
Join Date: Dec 2012
Location: Hythe - Southampton
Posts: 9,607
Downloads: 1132
Uploads: 0


Default Replacing Steam With A Dvd

Last updated 25th January 2018

Steam needs "Evaporating" get the Dvd if you can or otherwise consider a download version which will be cheaper.

With a dvd you actually own it and it is easier to re-install.

Before loading the Dvd. Make sure that you leave no trace of Steam on your system.

Use a registry cleaner like "Ccleaner" and restart your system afterwards.

Go to your start button and use search and check again for any left over SH5.

If you find anything delete it and run the registry cleaner again.

If you already have a Uplay account play it safe and set up a new one for your new Silent Hunter 5 installation. This will come up at the end of the installation.


If you want to play the game with the 'German Voices' then choose the 'Custom' install.

After the install go to the following folders.

In the path Ubisoft\Silent Hunter 5\Data\Support\GameUpdater

There is a "GU" exe application that will update your game to v1.2


Tip
If you shade this information and then copy and paste it to your PC Notepad you can then edit it.

Last edited by THEBERBSTER; 01-25-18 at 03:46 PM.
THEBERBSTER is offline   Reply With Quote
Old 03-07-14, 04:43 PM   #14
Pazzesco
Swabbie
 
Join Date: Feb 2014
Posts: 10
Downloads: 22
Uploads: 0
Default

Useful tutorials, thanks berbster
Pazzesco is offline   Reply With Quote
Old 03-08-14, 04:21 AM   #15
tonschk
Admiral
 
Join Date: Mar 2007
Posts: 2,200
Downloads: 172
Uploads: 0
Default

Amazing work , thank you THEBERBSTER
__________________
What we do in life echoes in Eternity
tonschk is offline   Reply With Quote
Reply


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 06:31 PM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright © 1995- 2024 Subsim®
"Subsim" is a registered trademark, all rights reserved.