Graphic tweaks for AMD graphics card

Niume · 03-12-21, 02:17 PM

Hello, I have upgraded from Nvidia to AMD. Problem is that I lost my great anti aliasing settings which were in nvidia control panel. Does anyone have a guide for removing the jeggies and making the game look better for amd graphic cards? Because when changing settings through driver software doesint effect anything.
UPDATE 1
Update on the situation. I had same issue with Silent Hunter IV, but after advice (ticking disable fullscreen optimization) it started working and I could get very great image. I tried to do the same thing for SIlent Hunter III but it didn't worked.

Okay I have found a culprit. Its Ahnerbe Wide gui mod. With stock resolution anti aliasing does turn on and off. but using Widescreen mod Anti aliasing doesint work entirely. So now the question is. HOW TO TURN ON ANTI ALIASING ON WIDESCREEN GUI.

Stock resolution 1024x768
Anti Aliasing is on ( You can see that wires are smooth and no jagged lines)

Anti aliasing is off The wires are pixelated

1920x1080 Ahnerbe Wide GUI

Anti aliasing is turned on in the settings but as you can see Anti aliasing is not working in the game

blackswan40 · 03-12-21, 03:52 PM

Hi Niume ive upgraded recently too to a Amd Radion asrock RX Taichi 6800 XT do you have adrenalin software installed link below

https://www.amd.com/en/support

Radion Adrenalin youtube guide

Hope this helps you some Niume Sir

Niume · 03-13-21, 02:25 AM

Thanks for the video. But I am searching ways to increase Anti-aliasing. The wires on the ship are very blocky

Niume · 03-17-21, 05:56 AM

Update on the situation. I had same issue with Silent Hunter IV, but after advice (ticking disable fullscreen optimization) it started working and I could get very great image.

I tried to do the same thing for SIlent Hunter III but it didn't worked. But sadly it didn't worked. Any ideas why?

Anvar1061 · 03-17-21, 06:29 AM

You need to experiment with each mode of setting up your video card in parallel, taking screenshots and comparing them. I shouldn't have gone in there. Everything was fine before your message :-)

Niume · 03-17-21, 11:58 AM

I may have found a workaround the problem. The anti aliasing works in windowed mode. I have found a program which can turn windowed mode into BORDERLESS windowed mode. The results are that you can play in 1920x1080 with perfect anti aliasing settings in "fullscreen".https://www.pcgamingwiki.com/wiki/Gl...creen_windowed

Soon I will create a guide in detail how to achieve it.

sergeiF · 02-11-23, 03:21 AM

Quote:

Originally Posted by Niume

I may have found a workaround the problem. The anti aliasing works in windowed mode. I have found a program which can turn windowed mode into BORDERLESS windowed mode. The results are that you can play in 1920x1080 with perfect anti aliasing settings in "fullscreen".https://www.pcgamingwiki.com/wiki/Gl...creen_windowed

Soon I will create a guide in detail how to achieve it.

Did you manage to solve the problem? How to run in windowed mode? I have the same problem

Aktungbby · 02-11-23, 12:22 PM

sergeiF! ...after a 2 year 'silent run'!

Niume · 02-12-23, 06:05 AM

Quote:

Originally Posted by sergeiF

Did you manage to solve the problem? How to run in windowed mode? I have the same problem

Hi, yes I have

Niume · 02-12-23, 06:07 AM

I launch the SH3 in windowed and use Borderless gaming program, which makes the windowed screen into a borderless fullscreen. In this mode the Anti aliasing also works great.

https://github.com/Codeusa/Borderless-Gaming/releases

silentwayIII · 02-12-23, 10:01 AM

Niume
I was anxiously waiting for your anti aliasing fix for SH3. Can you post what you did with the borderless gaming software program. There are many of us who would like to know what to do.

silentwayIII

Niume · 02-12-23, 01:40 PM

Quote:

Originally Posted by silentwayIII

Niume
I was anxiously waiting for your anti aliasing fix for SH3. Can you post what you did with the borderless gaming software program. There are many of us who would like to know what to do.

silentwayIII

Hi, silentwayIII

Here is the link to the guide.

https://www.subsim.com/radioroom/sho...d.php?t=248987

silentwayIII · 02-13-23, 11:31 AM

Hi Niume
I believe it works. I have made small adjustments to my anti aliasing settings for my amd card and they seem to have improved how cables, wires and railings look when close to the object.
I also believe a smaller monitor would help improve anti aliasing. My current monitor is a samsung 27" curved display (4 years old) which I think is a bit too big for 1920x1080 and so stretches things out a bit.
Thank you for the Borderless Gaming Software suggestion, it helps.
silentwayIII

sergeiF · 03-04-23, 05:39 PM

Unfortunately on my monitor 32 2560x1440 it gives black bars at the top and bottom

sergeiF · 03-07-23, 12:20 PM

editing the d3d9.dll file can solve the problem?
How to set 1440p resolution?

03-12-21, 02:17 PM	#1
Niume Sea Lord Join Date: Sep 2015 Location: Lithuania Posts: 1,637 Downloads: 503 Uploads: 2	Graphic tweaks for AMD graphics card Hello, I have upgraded from Nvidia to AMD. Problem is that I lost my great anti aliasing settings which were in nvidia control panel. Does anyone have a guide for removing the jeggies and making the game look better for amd graphic cards? Because when changing settings through driver software doesint effect anything. UPDATE 1 Update on the situation. I had same issue with Silent Hunter IV, but after advice (ticking disable fullscreen optimization) it started working and I could get very great image. I tried to do the same thing for SIlent Hunter III but it didn't worked. Okay I have found a culprit. Its Ahnerbe Wide gui mod. With stock resolution anti aliasing does turn on and off. but using Widescreen mod Anti aliasing doesint work entirely. So now the question is. HOW TO TURN ON ANTI ALIASING ON WIDESCREEN GUI. Stock resolution 1024x768 Anti Aliasing is on ( You can see that wires are smooth and no jagged lines) Anti aliasing is off The wires are pixelated 1920x1080 Ahnerbe Wide GUI Anti aliasing is turned on in the settings but as you can see Anti aliasing is not working in the game __________________ GLORY TO UKRAINE! [ENG] SH 4 KSD II Ace Edition Last edited by Niume; 03-17-21 at 06:21 AM.

03-12-21, 03:52 PM	#2
blackswan40 GWX - KC Crash Test Dummy Join Date: Mar 2008 Location: IN THE STEEL SHARKS VIRTUAL OCEAN Posts: 2,782 Downloads: 603 Uploads: 31	Hi Niume ive upgraded recently too to a Amd Radion asrock RX Taichi 6800 XT do you have adrenalin software installed link below https://www.amd.com/en/support Radion Adrenalin youtube guide Hope this helps you some Niume Sir __________________ Someone Had to Make the Tea Last edited by blackswan40; 03-12-21 at 04:12 PM.

03-13-21, 02:25 AM	#3
Niume Sea Lord Join Date: Sep 2015 Location: Lithuania Posts: 1,637 Downloads: 503 Uploads: 2	Thanks for the video. But I am searching ways to increase Anti-aliasing. The wires on the ship are very blocky __________________ GLORY TO UKRAINE! [ENG] SH 4 KSD II Ace Edition

03-17-21, 05:56 AM	#4
Niume Sea Lord Join Date: Sep 2015 Location: Lithuania Posts: 1,637 Downloads: 503 Uploads: 2	Update on the situation. I had same issue with Silent Hunter IV, but after advice (ticking disable fullscreen optimization) it started working and I could get very great image. I tried to do the same thing for SIlent Hunter III but it didn't worked. But sadly it didn't worked. Any ideas why? __________________ GLORY TO UKRAINE! [ENG] SH 4 KSD II Ace Edition

03-17-21, 06:29 AM	#5
Anvar1061 Ocean Warrior Join Date: May 2012 Location: In the sea, on land and above Posts: 3,481 Downloads: 875 Uploads: 0	You need to experiment with each mode of setting up your video card in parallel, taking screenshots and comparing them. I shouldn't have gone in there. Everything was fine before your message :-) __________________

03-17-21, 11:58 AM	#6
Niume Sea Lord Join Date: Sep 2015 Location: Lithuania Posts: 1,637 Downloads: 503 Uploads: 2	I may have found a workaround the problem. The anti aliasing works in windowed mode. I have found a program which can turn windowed mode into BORDERLESS windowed mode. The results are that you can play in 1920x1080 with perfect anti aliasing settings in "fullscreen".https://www.pcgamingwiki.com/wiki/Gl...creen_windowed Soon I will create a guide in detail how to achieve it. __________________ GLORY TO UKRAINE! [ENG] SH 4 KSD II Ace Edition

02-11-23, 12:22 PM	#8
Aktungbby Gefallen Engel U-666 Join Date: Jul 2013 Location: On a tilted, overheated, overpopulated spinning mudball on Collision course with Andromeda Galaxy Posts: 29,995 Downloads: 24 Uploads: 0	welcome back! sergeiF! ...after a 2 year 'silent run'! __________________ "Only two things are infinite; The Universe and human squirrelyness?!!

02-12-23, 06:07 AM	#10
Niume Sea Lord Join Date: Sep 2015 Location: Lithuania Posts: 1,637 Downloads: 503 Uploads: 2	I launch the SH3 in windowed and use Borderless gaming program, which makes the windowed screen into a borderless fullscreen. In this mode the Anti aliasing also works great. https://github.com/Codeusa/Borderless-Gaming/releases __________________ GLORY TO UKRAINE! [ENG] SH 4 KSD II Ace Edition

02-12-23, 10:01 AM	#11
silentwayIII Electrician's Mate Join Date: Apr 2006 Posts: 135 Downloads: 166 Uploads: 0	AMD anti aliasing fix Niume I was anxiously waiting for your anti aliasing fix for SH3. Can you post what you did with the borderless gaming software program. There are many of us who would like to know what to do. silentwayIII

02-13-23, 11:31 AM	#13
silentwayIII Electrician's Mate Join Date: Apr 2006 Posts: 135 Downloads: 166 Uploads: 0	Borderless Hi Niume I believe it works. I have made small adjustments to my anti aliasing settings for my amd card and they seem to have improved how cables, wires and railings look when close to the object. I also believe a smaller monitor would help improve anti aliasing. My current monitor is a samsung 27" curved display (4 years old) which I think is a bit too big for 1920x1080 and so stretches things out a bit. Thank you for the Borderless Gaming Software suggestion, it helps. silentwayIII

03-04-23, 05:39 PM	#14
sergeiF Watch Join Date: Nov 2020 Posts: 18 Downloads: 1 Uploads: 0	Unfortunately on my monitor 32 2560x1440 it gives black bars at the top and bottom

03-07-23, 12:20 PM	#15
sergeiF Watch Join Date: Nov 2020 Posts: 18 Downloads: 1 Uploads: 0	editing the d3d9.dll file can solve the problem? How to set 1440p resolution?