Snorkel deployment

Randomizer · 03-03-19, 03:27 PM

I quite enjoy SH3 in the late was, trying to survive and achieve something resembling a score in mid to late 1944 using a VIIC. This is difficult in GWX3 but more difficult in NYGM, which may come as no surprise.

One issue is that in GWX3 it takes less than 2-minutes to raise the snort and start the diesels. However in NYGM it takes typically takes more than 3-minutes just to raise/lower the mast. Particularly when surprised by aircraft, this can be deadly since I suspect that the retracting snorkel mast is more vulnerable to damage.

There is some film footage on the Internet of VIIs and IXs extending and retracting their masts and from these snippets of data it would seem that GWX3 is closer than NYGM for extension/retraction times but the sample size is small.

I checked the snorkel entries for the boats in their respective NSS_UboatXXXX.cfg files and they appear identical so I cannot determine where the extension/retraction parameters live.

Does anybody know how to edit the appropriate file to reduce the time in NYGM. Thanks in advance.

-C

Randomizer · 03-06-19, 04:51 PM

Over 180-views and no help. Disappointed but not really surprised.

-C

propbeanie · 03-06-19, 08:49 PM

Have you looked at the Data / Library / Sensor.dat & sim files?

Randomizer · 03-08-19, 01:55 AM

Quote:

Originally Posted by propbeanie

Have you looked at the Data / Library / Sensor.dat & sim files?

Thanks for the response, in a million years I would not have looked in the sensor.sim file for snorkel parameters. There are nine entries there for the snorkel extension and changing the values in all of them from 180 to 15 produces no changes in the extension time in the game. The extension values in GWX3 are 10 but why changes made to the NYGM file produce no results is unknown to me. There does not appear to be any snorkel entries in the sensors.dat file so no joy there.

I'm missing something...

-C

propbeanie · 03-08-19, 01:30 PM

Have you looked in the H.sie options?

Those file names are for Stock. NYGM might use something different. The dat file is the 3D model, with nodes that are "linked" to the parameters in the sim file by the "Parent ID" listing at the top of a particular node's page. So if you open Sensors.sim with S3D, and look at the "12: Obj_snorkel" node, you'll see near the top of the page it's "ID: 0x9bbc018fa140ee32" and its "Parent ID: 0xac5f9baa2a26e0ce", which you'll not find the Parent ID in the sim file - at least, you shouldn't... But copy that Parent ID, open the Sensors.dat file, use "Edit", "Find", and paste that hex number Parent ID into the "Find what" box, press "Find next", and you should have "Node:170 - NSS_Uboattype7_SNK" highlighted (in Stock). Click on the "Model Preview" link, click the screen, zoom-in, and press the video camera icon just about the view window, and there's the snorkel and cover for the Type 7 centered in the window...

Download something like Notepad++, and use its "Search in files" function, and "target" *.sim files in the SH3 Data folder, including sub-folders. Use the submarine's eqp file to find the LinkName and use that for the search term. You can find all kinds of interesting stuff like that... Things like a snorkel or a gun are usually (not always) in the Library folder.

Randomizer · 03-08-19, 04:32 PM

Cannot find snorkel extension/retraction times as an option in H.sie's option selector or hsie.ini file.

I have been working in NYGM with S3D and it's beginning to look like the effort required will not be worth the results particularly since my WAC, LSH, CCoM and GWX3 (and presumably Stock) installations all use the 10-second extension/retraction time.

Too bad that the NYGM team did so much work preparing the theatre for the 1944-45 Inshore Campaign and then made it nearly impossible to use because of the snorkel extension issue. While 10-seconds is quite probably too short, 180 seconds seems almost certainly too long based on the available visual evidence.

Anyway, thank you for the help, will probably continue to tinker with the issue since I already have Notepad++ although am still not comfortable using it. That said have copied your post into Notepad as an editing guide.

-C

Hebe Vollmaus · 03-10-19, 02:06 PM

Quote:

Originally Posted by Randomizer

Thanks for the response, in a million years I would not have looked in the sensor.sim file for snorkel parameters.

You may learn how to search for things in youre SH3-installation.
Sometimes i use "SearchMyFiles" to find things, but especialy for SH3 i cannot really recommend it, since it can produce some of 'false positives'. Anyway, a search for "snorkel,time" in SH3/data for "multiple values" can find 10 files. And only 1 file when restrict the search to SH3/data/Library.

Quote:

There are nine entries there for the snorkel extension and changing the values in all of them from 180 to 15 produces no changes in the extension time in the game. The extension values in GWX3 are 10 but why changes made to the NYGM file produce no results is unknown to me. There does not appear to be any snorkel entries in the sensors.dat file so no joy there.

I'm missing something...

No. In NYGM 2017 i can only find 3 entries for Snorkel in Sensors.sim.
And change the entries from 180 to 30 works (i only tested 7b) as it should.

Greetings.

Randomizer · 03-10-19, 05:11 PM

Quote:

No. In NYGM 2017 i can only find 3 entries for Snorkel in Sensors.sim.
And change the entries from 180 to 30 works (i only tested 7b) as it should.

The FuMB37 mod adds lines 34,36,38,40,42 and 44 to the sensors.sim file. and editing all entries does not affect the extension time with the mod activated. Will disable the mod and check back.

-C

Randomizer · 03-11-19, 01:13 AM

Quote:

Originally Posted by Hebe Vollmaus

Anyway, a search for "snorkel,time" in SH3/data for "multiple values" can find 10 files. And only 1 file when restrict the search to SH3/data/Library.

This search turned up a whack of *.ogg files for the sound effects and nothing useful. Cannot find any relevant entries for snorkel times in the sensor.dat file.

Disabled the FuMB37 mod and edited the three snorkel entries in the sensor.sim to 30-seconds. No luck, the snorkel still takes 3-minutes to extend.

Rolled back the mods to NYGM3_6F and edited the sensors.sim file in that update 30-seconds. Reactivated the mods in use.

NYGM Mod list in use, other than the snorkel issue no problems noted so far after 5-complete 1940-41 patrols.

NYGM Tonnage War V2.5 – Stand Alone Version
NYGM3_New
NYGM3_6F* (Note)
NYGM 2017A
Supplement to V16B1 (JSGME)
Stiebler4C_Addon_for_V16B1
IABLShipsforNYGM_New
Anvart_Stiebler_TurmsR01R02
Kiel_Locks_NYGM
Single Merchant Contact Mod
depth charge noise - Rev A - NYGM
Harbor Traffic Add-In
NYGM Tonnage War Minefield Mod
1500 meter bearing overlay
3rd Flotilla Mod
Enhanced Nav Map Plotting Tools
Functional Draggable Chrono for NYGM

(Note) None of the Mods below here change the sensor.sim file.

No biggie, I just won't use NYGM for late war careers.

-C

03-03-19, 03:27 PM	#1
Randomizer Weps Join Date: Mar 2019 Location: Vancouver Island Posts: 366 Downloads: 138 Uploads: 0	Snorkel deployment I quite enjoy SH3 in the late was, trying to survive and achieve something resembling a score in mid to late 1944 using a VIIC. This is difficult in GWX3 but more difficult in NYGM, which may come as no surprise. One issue is that in GWX3 it takes less than 2-minutes to raise the snort and start the diesels. However in NYGM it takes typically takes more than 3-minutes just to raise/lower the mast. Particularly when surprised by aircraft, this can be deadly since I suspect that the retracting snorkel mast is more vulnerable to damage. There is some film footage on the Internet of VIIs and IXs extending and retracting their masts and from these snippets of data it would seem that GWX3 is closer than NYGM for extension/retraction times but the sample size is small. I checked the snorkel entries for the boats in their respective NSS_UboatXXXX.cfg files and they appear identical so I cannot determine where the extension/retraction parameters live. Does anybody know how to edit the appropriate file to reduce the time in NYGM. Thanks in advance. -C

03-06-19, 08:49 PM	#3
propbeanie CTD - it's not just a job Join Date: May 2016 Location: One hour from Music City USA! Posts: 10,098 Downloads: 451 Uploads: 2	Have you looked at the Data / Library / Sensor.dat & sim files? __________________ "...and bollocks to the naysayers" - Jimbuna

03-08-19, 01:30 PM	#5
propbeanie CTD - it's not just a job Join Date: May 2016 Location: One hour from Music City USA! Posts: 10,098 Downloads: 451 Uploads: 2	Have you looked in the H.sie options? Those file names are for Stock. NYGM might use something different. The dat file is the 3D model, with nodes that are "linked" to the parameters in the sim file by the "Parent ID" listing at the top of a particular node's page. So if you open Sensors.sim with S3D, and look at the "12: Obj_snorkel" node, you'll see near the top of the page it's "ID: 0x9bbc018fa140ee32" and its "Parent ID: 0xac5f9baa2a26e0ce", which you'll not find the Parent ID in the sim file - at least, you shouldn't... But copy that Parent ID, open the Sensors.dat file, use "Edit", "Find", and paste that hex number Parent ID into the "Find what" box, press "Find next", and you should have "Node:170 - NSS_Uboattype7_SNK" highlighted (in Stock). Click on the "Model Preview" link, click the screen, zoom-in, and press the video camera icon just about the view window, and there's the snorkel and cover for the Type 7 centered in the window... Download something like Notepad++, and use its "Search in files" function, and "target" *.sim files in the SH3 Data folder, including sub-folders. Use the submarine's eqp file to find the LinkName and use that for the search term. You can find all kinds of interesting stuff like that... Things like a snorkel or a gun are usually (not always) in the Library folder. __________________ "...and bollocks to the naysayers" - Jimbuna

03-06-19, 04:51 PM	#2
Randomizer Weps Join Date: Mar 2019 Location: Vancouver Island Posts: 366 Downloads: 138 Uploads: 0	Over 180-views and no help. Disappointed but not really surprised. -C

03-08-19, 04:32 PM	#6
Randomizer Weps Join Date: Mar 2019 Location: Vancouver Island Posts: 366 Downloads: 138 Uploads: 0	Cannot find snorkel extension/retraction times as an option in H.sie's option selector or hsie.ini file. I have been working in NYGM with S3D and it's beginning to look like the effort required will not be worth the results particularly since my WAC, LSH, CCoM and GWX3 (and presumably Stock) installations all use the 10-second extension/retraction time. Too bad that the NYGM team did so much work preparing the theatre for the 1944-45 Inshore Campaign and then made it nearly impossible to use because of the snorkel extension issue. While 10-seconds is quite probably too short, 180 seconds seems almost certainly too long based on the available visual evidence. Anyway, thank you for the help, will probably continue to tinker with the issue since I already have Notepad++ although am still not comfortable using it. That said have copied your post into Notepad as an editing guide. -C