is sonar buged?

Captain_Leavitt · 07-05-14, 12:19 PM

Don't forget that the sound of your own engines will make it harder for you. To get around this slow to 1/3 or all stop and you will be in a much better position.

Jaystew · 07-05-14, 12:56 PM

I always listen for contacts at all stop. The signal to noise ratio in my head is much clearer. There may be more than one or two sound contacts, if so you may not hear them at all with your engines running.

Sound checks are best made at all stop. I usually do them at between periscope and 30m but there may be a better depth.

LCQ_SH · 07-05-14, 01:53 PM

well, I have just tried at 30m all stop engines...........my sonar man has reported a contact........and I wen to the sonar stack, and can't hear it......

any idea why that could be?

LCQ_SH · 07-05-14, 02:23 PM

oh, I missed the recommendation of deactivating realistic hydrophone, now I can listen.......but still, sonar reports contact at one bearing, and I don't hear anything....... haha

how does realistic hydrophone is for anyway? am I missing something?

tnx for the advice though!

vdr1981 · 07-05-14, 04:02 PM

This could be due to TDW patch for |"increased rendering distance"... It looks like that this patch will drastically increase AI detection abilities but audio signal for player is not affected.
Maybe you could try do disable this patch and report changes, what do you say?

Jaystew · 07-06-14, 01:24 AM

From the last time I was at the sonar station I had trouble hearing anything in the last 20 deg range from 180, so if your contact is 160-200 you will not hear it. In fact it will be an abrupt signal loss at the edge.

If your sonar guy can hear it you most definitely should be able to. What bearing are they calling? I always slow sweep the entire sound circle all 320 degrees and listen. If your setup is like mine you should hear things along a 5-10 degree chunk and the loudest in the middle of that chunk.

TheBeast · 07-27-14, 09:08 PM

All previous replies are valid.
One thing to notes is that Stock SH5.exe had a bug with Hydrophone and TDW Generic Patcher utility explains how to fix that bug.
This resolution is not easy unless you are experienced using HEX editor.

How to Use TDW GenericPatcher for Beginer
[TEC] SH5.exe patches to fix bugs and add functionality

Regards!
TheBeast

07-05-14, 04:02 PM	#5
vdr1981 Navy Seal Join Date: May 2010 Location: Србија Posts: 6,078 Downloads: 581 Uploads: 13	This could be due to TDW patch for \|"increased rendering distance"... It looks like that this patch will drastically increase AI detection abilities but audio signal for player is not affected. Maybe you could try do disable this patch and report changes, what do you say? __________________ Best regards... Vecko The Wolves of Steel v2.2.25_SH5 Expansion Pack_Full The Wolves of Steel v2.2.xx to v2.2.25 - Update PDF Install Instructions How to report an issue If You wish to support my work...

07-27-14, 09:08 PM	#7
TheBeast The Old Man Join Date: Jan 2010 Location: Lynnwood, WA Posts: 1,533 Downloads: 886 Uploads: 23	Another Possible Solution All previous replies are valid. One thing to notes is that Stock SH5.exe had a bug with Hydrophone and TDW Generic Patcher utility explains how to fix that bug. This resolution is not easy unless you are experienced using HEX editor. How to Use TDW GenericPatcher for Beginer [TEC] SH5.exe patches to fix bugs and add functionality Regards! TheBeast __________________ Fear me! I am, TheBeastBelow SHIV-MediaFire \| SHV-MediaFire

07-05-14, 12:19 PM	#1
Captain_Leavitt Bosun Join Date: Jun 2014 Posts: 63 Downloads: 55 Uploads: 0	Don't forget that the sound of your own engines will make it harder for you. To get around this slow to 1/3 or all stop and you will be in a much better position.

07-05-14, 12:56 PM	#2
Jaystew Sparky Join Date: Apr 2013 Posts: 151 Downloads: 50 Uploads: 0	I always listen for contacts at all stop. The signal to noise ratio in my head is much clearer. There may be more than one or two sound contacts, if so you may not hear them at all with your engines running. Sound checks are best made at all stop. I usually do them at between periscope and 30m but there may be a better depth.

07-05-14, 01:53 PM	#3
LCQ_SH Lieutenant Join Date: May 2012 Posts: 266 Downloads: 176 Uploads: 0	well, I have just tried at 30m all stop engines...........my sonar man has reported a contact........and I wen to the sonar stack, and can't hear it...... any idea why that could be?

07-05-14, 02:23 PM	#4
LCQ_SH Lieutenant Join Date: May 2012 Posts: 266 Downloads: 176 Uploads: 0	oh, I missed the recommendation of deactivating realistic hydrophone, now I can listen.......but still, sonar reports contact at one bearing, and I don't hear anything....... haha how does realistic hydrophone is for anyway? am I missing something? tnx for the advice though!

07-06-14, 01:24 AM	#6
Jaystew Sparky Join Date: Apr 2013 Posts: 151 Downloads: 50 Uploads: 0	From the last time I was at the sonar station I had trouble hearing anything in the last 20 deg range from 180, so if your contact is 160-200 you will not hear it. In fact it will be an abrupt signal loss at the edge. If your sonar guy can hear it you most definitely should be able to. What bearing are they calling? I always slow sweep the entire sound circle all 320 degrees and listen. If your setup is like mine you should hear things along a 5-10 degree chunk and the loudest in the middle of that chunk.