Obs peri obstructing uzo view on type VIIC? - Page 2

Rubini · 03-12-12, 04:07 PM

Quote:

Originally Posted by TheDarkWraith

That's because when you save it using my app I put some data (extendeddata for the exporter) into the file. The files changes because of this

7c_01 con was delivered from the devs with incorrect CRC value. That is why you are getting the error at start with this file. It's ok.

I've edited both 7c_01 and 7c_02 conns with no problems. Loaded game up in single mission to try both. Will post screenshot here in a few

thanks again...seems that the ctd can be related to some messing with my files &jsgme. Give a few more time, I´m looking at the issue now...I should like to make this correction by myself using GR2 editor ... it´s a honour cause now!

Rubini · 03-12-12, 06:02 PM

Worked!
First found my CTd problem...was a new sounds and it´s wrong wrotes on AI/crew scripts (some tests that i was making too)

Then, tried my own Conning_7C_0X.GR2 files, allowed the GR2 editor to correct the Conning_7C_01.GR2 file, made the changes on cfg#O02 e 03, saved them, and they worked without any problem!

In the end, i learned a bit how to work with yours GR2 Editor!! This will opens new doors for my mod work! Thanks TDW!

I will take a look if others towers also have the same problem and will post a correction later!

TheDarkWraith · 03-12-12, 06:04 PM

Quote:

Originally Posted by Rubini

Then, tried my own Conning_7C_0X.GR2 files, allowed the GR2 editor to correct the Conning_7C_01.GR2 file, made the changes on cfg#O02 e 03, saved them, and they worked without any problem!

In the end, i learned a bit how to work with yours GR2 Editor!! This will opens new doors for my mod work! Thanks TDW!

Excellent, glad you were able to do it

Since you are just starting out using the app you have much to discover!

If you have any suggestions/comments/etc. about my GR2 Editor/Viewer please make them in my thread for the app

Rubini · 03-12-12, 06:09 PM

Quote:

Originally Posted by TheDarkWraith

Excellent, glad you were able to do it

Since you are just starting out using the app you have much to discover!

If you have any suggestions/comments/etc. about my GR2 Editor/Viewer please make them in my thread for the app

With pleasure! See you there soon!

Pascal · 06-15-14, 07:56 PM

Quote:

Originally Posted by Rubini

Ok: here the pics:

Here what I saw when I enter on uzo station:

I just saw this on type VIIC (but only teste on VIIC and VIIA)...
Any idea?

IS THERE A MOD FOR THAT PROBLEM ?

Pascal · 06-26-14, 09:39 AM

Quote:

Originally Posted by Rubini

Worked!
First found my CTd problem...was a new sounds and it´s wrong wrotes on AI/crew scripts (some tests that i was making too)

Then, tried my own Conning_7C_0X.GR2 files, allowed the GR2 editor to correct the Conning_7C_01.GR2 file, made the changes on cfg#O02 e 03, saved them, and they worked without any problem!

In the end, i learned a bit how to work with yours GR2 Editor!! This will opens new doors for my mod work! Thanks TDW!

I will take a look if others towers also have the same problem and will post a correction later!

Hello !
Thank you to explain the way to change "cfg#O02 e 03" to resolve this stupid error on head of periscope always nose in cloud !

06-28-14, 10:42 AM

Quote:

Originally Posted by Pascal

IS THERE A MOD FOR THAT PROBLEM ?

Pascal, I haven't played in a week or so, but I remember this post and checked my scope back then. It was fine and isn't blocking the UZO

. I have no idea what is causing your scope to be up like that, but at least you know it can be done. Hopefully, someone else will have a fix for you.

Defiance · 06-28-14, 11:55 AM

Pascal,

I think he means this, you need to dl tdw's GR2 Editor

You have to set paths to sh5 folder in two options

Then dig around and find the Conning_7C_0X.GR2 file/s

Locate Conning_7C_01.GR2 file, find cfg number O02 e 03 (whatever that is, i'm still getting to grips with the editor but it's fun to learn and darn easy me thinks)

Alter height for a guess (obviously i hope) and save, and voila

If you do start to mess, make sure you backup (as always)

As said, i have had nothing like you're experiencing either

Pascal · 06-28-14, 03:13 PM

Thank you for your reply. I well do all you say. But, no "height" position (it will be too easy...). But X Y Z coordonnes transform position... I'm not so bad to make skins, but there, i'm bad
It will be so nice if Rubini, or TheDarkWraith, or hs cousin, does a Mod.

Pascal · 06-30-14, 07:27 AM

Finally, made by himself, that's even better ;-)
For Sub Model VIIC only :
http://www.mediafire.com/download/jc...pe_in_tube.zip

Defiance · 06-30-14, 12:37 PM

Wtg Pascal,

Deep_Hunter · 08-01-14, 09:47 PM

Hey Pascal,
thank you for this correction...I was looking for something like this

03-12-12, 06:02 PM	#17
Rubini Ocean Warrior Join Date: May 2005 Location: São Paulo Brazil Posts: 2,728 Downloads: 132 Uploads: 0	Worked! First found my CTd problem...was a new sounds and it´s wrong wrotes on AI/crew scripts (some tests that i was making too) Then, tried my own Conning_7C_0X.GR2 files, allowed the GR2 editor to correct the Conning_7C_01.GR2 file, made the changes on cfg#O02 e 03, saved them, and they worked without any problem! In the end, i learned a bit how to work with yours GR2 Editor!! This will opens new doors for my mod work! Thanks TDW! I will take a look if others towers also have the same problem and will post a correction later! __________________ One gamer's must-have mod is another gamer's waste of time. -Sailor Steve

06-28-14, 11:55 AM	#23
Defiance Grey Wolf Join Date: Apr 2005 Location: UK Posts: 908 Downloads: 673 Uploads: 0	Pascal, I think he means this, you need to dl tdw's GR2 Editor You have to set paths to sh5 folder in two options Then dig around and find the Conning_7C_0X.GR2 file/s Locate Conning_7C_01.GR2 file, find cfg number O02 e 03 (whatever that is, i'm still getting to grips with the editor but it's fun to learn and darn easy me thinks) Alter height for a guess (obviously i hope) and save, and voila If you do start to mess, make sure you backup (as always) As said, i have had nothing like you're experiencing either __________________ Have Fun Bye Def

06-28-14, 03:13 PM	#24
Pascal Samurai Navy Join Date: Apr 2005 Location: Paris Posts: 588 Downloads: 574 Uploads: 0	To Defiance Thank you for your reply. I well do all you say. But, no "height" position (it will be too easy...). But X Y Z coordonnes transform position... I'm not so bad to make skins, but there, i'm bad It will be so nice if Rubini, or TheDarkWraith, or hs cousin, does a Mod. __________________ My Mods

06-30-14, 07:27 AM	#25
Pascal Samurai Navy Join Date: Apr 2005 Location: Paris Posts: 588 Downloads: 574 Uploads: 0	The solution Finally, made by himself, that's even better ;-) For Sub Model VIIC only : http://www.mediafire.com/download/jc...pe_in_tube.zip __________________ My Mods

06-30-14, 12:37 PM	#26
Defiance Grey Wolf Join Date: Apr 2005 Location: UK Posts: 908 Downloads: 673 Uploads: 0	Wtg Pascal, __________________ Have Fun Bye Def

08-01-14, 09:47 PM	#27
Deep_Hunter Sailor man Join Date: Jan 2014 Posts: 50 Downloads: 80 Uploads: 0	Hey Pascal, thank you for this correction...I was looking for something like this