FIX for Broken Mediterranean Sea V2

Marhkimov · 11-13-05, 04:49 AM

If you pay attention, SH3 does not swap seawater textures even if you cross from the Atlantic to the Med, Arctic to Atlantic, and vice versa. This is a broken feature in SH3. The same also applies to starting a campaign in the Med (La Spezia, Toulon). SH3 always applies the Atlantic seawater in the campaign mode, NO MATTER where you are located.

Using SH3Cmdr, I have come up with a solution for this. If you are currently sailing out of the 29th flotilla (based in the Med), my solution involves using SH3Cmdr to change the Atlantic seawater textures to the Med seawater.

My fix comes with a very minor problem.....

However, I must stress that it is a VERY MINOR problem, indeed. If you begin in the Med and sail out into the Atlantic, you will still see Med seawater, and vice versa. Which is no big deal, since you should NEVER leave the Mediterranean if you are in the 29th flotilla... And similarly, you should NEVER enter the Mediterranean if you are based in the Atlantic.

The fix is compatible with all major mods, including RUb, IUB, and Atmosphere mod.

DOWNLOAD the new FIX V2 at terrapin's site, in the mods section:
http://www.u-boot.realsimulation.com/

Marhks_Ocean_MADNESS_v2

Since the fix has to do with SH3Cmdr and not actually SH3, you can't use JSGME to install it. NO BIG DEAL, just follow the simple install instructions.

Here are some beautiful screens of the Med. Hopefully, this will entice everyone to try a campaign with the 29th flotilla.

JScones · 11-13-05, 05:05 AM

Great idea. Simple but effective.

Can Beery and I have your permission to consider including it standard with the next SH3Cmdr?

Marhkimov · 11-13-05, 05:11 AM

Sure.

Rubini · 11-13-05, 09:00 AM

Great marhkimov,

Do you will do this for Artic sea too?

Rubini.

Hartmann · 11-13-05, 12:58 PM

Quote:

Originally Posted by marhkimov

My fix comes with a very minor problem.....

However, I must stress that it is a VERY MINOR problem, indeed. If you begin in the Med and sail out into the Atlantic, you will still see Med seawater, and vice versa. Which is no big deal, since you should NEVER leave the Mediterranean if you are in the 29th flotilla... And similarly, you should NEVER enter the Mediterranean if you are based in the Atlantic.

Nice fix

If i want enter in the mediterranean.. can i save the game, change the colours and reload ?? :hmm:

Happy Times · 11-13-05, 01:00 PM

Thank you very much

rulle34 · 11-13-05, 01:59 PM

Great

Marhkimov · 11-13-05, 02:07 PM

Quote:

Originally Posted by Hartmann

Nice fix

If i want enter in the mediterranean.. can i save the game, change the colours and reload ?? :hmm:

No. The mediterranean waters are only activated if you play as part of the 29th flotilla.

Marhkimov · 11-13-05, 02:32 PM

Quote:

Originally Posted by Rubini

Great marhkimov,

Do you will do this for Artic sea too?

Rubini.

So far, I haven't seen much reason to implement the arctic waters. I don't even know why they are in the game... How often did u-boats travel to the north pole?

It might be arctic waters in the Black Sea, but other than that, where else could we use it?

BTW - I think it is possible to add more sea types to the three already current seas... Sooo, is the Red Sea really red? LOL

baxter · 11-13-05, 02:59 PM

Really good idea, marhkimov, thanks!

oblio · 11-13-05, 03:00 PM

Nice work!

timetraveller · 11-13-05, 04:36 PM

Nice looking water, marhkimov. Great idea too!

TT

11-13-05, 05:50 PM

Quote:

Originally Posted by marhkimov

So far, I haven't seen much reason to implement the arctic waters. I don't even know why they are in the game... How often did u-boats travel to the north pole?

It might be arctic waters in the Black Sea, but other than that, where else could we use it?

You better throw out that atlas you are using... arctic waters is above the polar cicle, not in the black sea....

And since there were 2 flottilas that aimed at the Murmansk convoys quite a bit in real life, it might not be a bad idea to implement this genial fix there too.

Marhkimov · 11-13-05, 06:05 PM

Quote:

Originally Posted by Jotte

You better throw out that atlas you are using... arctic waters is above the polar cicle, not in the black sea....

Oops, you're right... The atlas in my head is broken...

Quote:

Originally Posted by Jotte

And since there were 2 flottilas that aimed at the Murmansk convoys quite a bit in real life, it might not be a bad idea to implement this genial fix there too.

I don't know of any other way to implement the Arctic waters...

Ducimus · 12-07-05, 05:54 PM

I must be blind, i cant tell much of a difference between atlantic and med water. Can someone point it out to me? Ive been thinking about going to the 29th so im kinda curious.

11-13-05, 04:49 AM	#1
Marhkimov Admiral Join Date: May 2005 Location: Bay Area, California, USA Posts: 2,377 Downloads: 0 Uploads: 0	FIX for Broken Mediterranean Sea V2 If you pay attention, SH3 does not swap seawater textures even if you cross from the Atlantic to the Med, Arctic to Atlantic, and vice versa. This is a broken feature in SH3. The same also applies to starting a campaign in the Med (La Spezia, Toulon). SH3 always applies the Atlantic seawater in the campaign mode, NO MATTER where you are located. Using SH3Cmdr, I have come up with a solution for this. If you are currently sailing out of the 29th flotilla (based in the Med), my solution involves using SH3Cmdr to change the Atlantic seawater textures to the Med seawater. My fix comes with a very minor problem..... However, I must stress that it is a VERY MINOR problem, indeed. If you begin in the Med and sail out into the Atlantic, you will still see Med seawater, and vice versa. Which is no big deal, since you should NEVER leave the Mediterranean if you are in the 29th flotilla... And similarly, you should NEVER enter the Mediterranean if you are based in the Atlantic. The fix is compatible with all major mods, including RUb, IUB, and Atmosphere mod. DOWNLOAD the new FIX V2 at terrapin's site, in the mods section: http://www.u-boot.realsimulation.com/ Marhks_Ocean_MADNESS_v2 Since the fix has to do with SH3Cmdr and not actually SH3, you can't use JSGME to install it. NO BIG DEAL, just follow the simple install instructions. Here are some beautiful screens of the Med. Hopefully, this will entice everyone to try a campaign with the 29th flotilla. __________________ It takes two to tango

11-13-05, 05:11 AM	#3
Marhkimov Admiral Join Date: May 2005 Location: Bay Area, California, USA Posts: 2,377 Downloads: 0 Uploads: 0	Sure. __________________ It takes two to tango

11-13-05, 01:00 PM	#6
Happy Times Ocean Warrior Join Date: Jun 2005 Location: Finland Posts: 2,950 Downloads: 10 Uploads: 0	Thank you very much __________________

11-13-05, 01:59 PM	#7
rulle34 Grey Wolf Join Date: Apr 2005 Location: Sweden Posts: 835 Downloads: 8 Uploads: 0	Great __________________

11-13-05, 05:05 AM	#2
JScones Navy Seal Join Date: Apr 2005 Posts: 5,501 Downloads: 19 Uploads: 0	Great idea. Simple but effective. Can Beery and I have your permission to consider including it standard with the next SH3Cmdr?

11-13-05, 09:00 AM	#4
Rubini Ocean Warrior Join Date: May 2005 Location: São Paulo Brazil Posts: 2,728 Downloads: 132 Uploads: 0	Great marhkimov, Do you will do this for Artic sea too? Rubini.

11-13-05, 02:59 PM	#10
baxter 中国水兵 Join Date: Jun 2005 Location: New York Posts: 282 Downloads: 0 Uploads: 0	Really good idea, marhkimov, thanks!

11-13-05, 03:00 PM	#11
oblio Watch Join Date: Jul 2005 Posts: 25 Downloads: 0 Uploads: 0	Nice work!

11-13-05, 04:36 PM	#12
timetraveller Beach Leaf Join Date: Dec 2004 Location: Atlantic Shipping Lanes Posts: 287 Downloads: 1 Uploads: 0	Nice looking water, marhkimov. Great idea too! TT

12-07-05, 05:54 PM	#15
Ducimus Rear Admiral Join Date: May 2005 Posts: 12,987 Downloads: 67 Uploads: 2	I must be blind, i cant tell much of a difference between atlantic and med water. Can someone point it out to me? Ive been thinking about going to the 29th so im kinda curious.