Application Error

TheRyeCatcher · 03-01-13, 03:15 PM

I've only been playing SH5 for about 3 months now. I've never been prompted to patch the game. I had downloaded a bunch of mods along with the enabler and the game has run fine...no CTD or errors. I was reading one of the mod readme files recently and saw that it says you must be patched.

I used the enabler to remove all mods, then ran the GU. The patch appeared to install just fine...same with the Ubisoft launcher. I have not yet tried re-installing any of the mods. When I launch the game, everything looks normal until I get an error that says:

sh5.exe - Application Error
Application has generated an exception that could not be handled.
Process ID=0x1628 (5672), Thread ID=0x164c (5708).
Click OK to terminate the application
Click CANCEL to debug the application

Not sure what to do here...or what I've done to cause this. I've tried un-installing and re-installing, but same results. Most of the programming stuff you guys do here is well above my pay grade, but I figured I would ask in case one of you salty guys had some advice.

Thanks in advance for any assistance!

GT182 · 03-02-13, 08:35 AM

Get Patch 1.2 and install it. Mods will not work until you do that. Here's a link to a thread that has the patch download link.... http://www.subsim.com/radioroom/showthread.php?t=202662

And hopefully you have the DVD for the SH5. Downloads aren't really the good way to get SH5 installed..... especially the Steam download.

volodya61 · 03-02-13, 09:20 AM

Quote:

Originally Posted by GT182

And hopefully you have the DVD for the SH5. Downloads aren't really the good way to get SH5 installed..

Gary, again? Why did you decide that d/l version is bad way?
I realize that you like DVD/CD more than others types of DATA.. but..

GT182 · 03-02-13, 09:37 AM

V, I say DVD only because so many have been having problems with the downloads. They shouldn't but do.... seems to me it's the nature of the beast.

volodya61 · 03-02-13, 09:56 AM

Quote:

Originally Posted by GT182

..because so many have been having problems with the downloads..

Who?
I use download versions of all my software for about a 8 years and never had problems..

TheRyeCatcher · 03-02-13, 11:41 AM

Just wanted to say "thanks" to everyone for the help! Does it matter that the 1.2 patch has "eu" in it...and I'm in the US? My computer knowledge is very limited...would never have gotten this far if it weren't for the help of forum members posting step-by-step instructions.

Thank you!

TheRyeCatcher · 03-02-13, 11:43 AM

Just tried downloading & installing the 1.2 patch, but got an error saying that it cannot be installed with this version of the game. At the risk of being a pain in the a**...am I doing something wrong?

finchOU · 03-02-13, 11:52 AM

Did you try doing a clean (re)-install of the game? There could be some leftover bagage from your MODs. Next step in your Troubleshooting process would be to uninstall/reinstall/patch 1.2/start game..if good/MOD.

I think you might have solved part of the problem with the EU vs US version. Find the US version.....i've made an error like this in the past. What verison of the game do you have ie DVD, Steam?

TheRyeCatcher · 03-02-13, 11:56 AM

Got game via download from Gamestop. Did some searching online for the US version of 1.2 last night and again this morning...but no luck. Will continue searching. Thanks again for everyone's help.

TheRyeCatcher · 03-02-13, 05:53 PM

Ok...uninstalled both the game and uplay...the downloaded both fresh with Gamestop app. Tried to launch the game without doing anything else; updater started automatically and patched the game to v1.1.5. Game launched fine after that, but still not at v2.0. Used the enabler to put all of the mods back in and game ran solid. Disabled all of the mods and clicked on the GUexe; game attempted to download the collector's edition patch to 2.0. It appeared as though the patch installed fine, but got a message saying "Silent Hunter has stopped working" and "Windows is searching for a solution" before everything went back to the desktop.

When I try to launch the game at this point, I get the same error message that was in the first post on this thread. Gotta admit...I really don't think I did anything wrong here, but still am baffled about how to get this thing patched to v2.0 and be able to run.

Any ideas, guys?

Fifi · 03-02-13, 07:19 PM

^^^^ All is running with admin rights?
My 2 cents...

GT182 · 03-03-13, 02:11 PM

You need the US version of 1.2. I'm trying to find a link for it but it looks like a to of links are no longer working.

I have it saved on my computer but can't send it via email. I wish SubSim would save it in their download section. Looks like you can even get the US version from the UBI's website. Their SH5 Forums says the link is in a Stickie but I didn't find it.

03-01-13, 03:15 PM	#1
TheRyeCatcher Swabbie Join Date: Oct 2012 Posts: 5 Downloads: 19 Uploads: 0	Application Error I've only been playing SH5 for about 3 months now. I've never been prompted to patch the game. I had downloaded a bunch of mods along with the enabler and the game has run fine...no CTD or errors. I was reading one of the mod readme files recently and saw that it says you must be patched. I used the enabler to remove all mods, then ran the GU. The patch appeared to install just fine...same with the Ubisoft launcher. I have not yet tried re-installing any of the mods. When I launch the game, everything looks normal until I get an error that says: sh5.exe - Application Error Application has generated an exception that could not be handled. Process ID=0x1628 (5672), Thread ID=0x164c (5708). Click OK to terminate the application Click CANCEL to debug the application Not sure what to do here...or what I've done to cause this. I've tried un-installing and re-installing, but same results. Most of the programming stuff you guys do here is well above my pay grade, but I figured I would ask in case one of you salty guys had some advice. Thanks in advance for any assistance!

03-02-13, 08:35 AM	#2
GT182 Ocean Warrior Join Date: May 2005 Location: New Castle of Delaware Posts: 3,231 Downloads: 658 Uploads: 0	Get Patch 1.2 and install it. Mods will not work until you do that. Here's a link to a thread that has the patch download link.... http://www.subsim.com/radioroom/showthread.php?t=202662 And hopefully you have the DVD for the SH5. Downloads aren't really the good way to get SH5 installed..... especially the Steam download. __________________ Gary No Borders, No Language, No Culture =s No Country I'm a Deplorable, and proud of it.

03-02-13, 09:37 AM	#4
GT182 Ocean Warrior Join Date: May 2005 Location: New Castle of Delaware Posts: 3,231 Downloads: 658 Uploads: 0	V, I say DVD only because so many have been having problems with the downloads. They shouldn't but do.... seems to me it's the nature of the beast. __________________ Gary No Borders, No Language, No Culture =s No Country I'm a Deplorable, and proud of it.

03-02-13, 11:52 AM	#8
finchOU Samurai Navy Join Date: Jan 2004 Posts: 571 Downloads: 77 Uploads: 0	Did you try doing a clean (re)-install of the game? There could be some leftover bagage from your MODs. Next step in your Troubleshooting process would be to uninstall/reinstall/patch 1.2/start game..if good/MOD. I think you might have solved part of the problem with the EU vs US version. Find the US version.....i've made an error like this in the past. What verison of the game do you have ie DVD, Steam? __________________ Intel i7-2700K-3.50GHz, 16 GB RAM, 2 xGTX 560,2GB,SLI,2 TB HD The Wolves of Steel 1.06 The Wolves of Steel 1.06 Update 05c

03-03-13, 02:11 PM	#12
GT182 Ocean Warrior Join Date: May 2005 Location: New Castle of Delaware Posts: 3,231 Downloads: 658 Uploads: 0	You need the US version of 1.2. I'm trying to find a link for it but it looks like a to of links are no longer working. I have it saved on my computer but can't send it via email. I wish SubSim would save it in their download section. Looks like you can even get the US version from the UBI's website. Their SH5 Forums says the link is in a Stickie but I didn't find it. __________________ Gary No Borders, No Language, No Culture =s No Country I'm a Deplorable, and proud of it.

03-02-13, 11:41 AM	#6
TheRyeCatcher Swabbie Join Date: Oct 2012 Posts: 5 Downloads: 19 Uploads: 0	Just wanted to say "thanks" to everyone for the help! Does it matter that the 1.2 patch has "eu" in it...and I'm in the US? My computer knowledge is very limited...would never have gotten this far if it weren't for the help of forum members posting step-by-step instructions. Thank you!

03-02-13, 11:43 AM	#7
TheRyeCatcher Swabbie Join Date: Oct 2012 Posts: 5 Downloads: 19 Uploads: 0	Just tried downloading & installing the 1.2 patch, but got an error saying that it cannot be installed with this version of the game. At the risk of being a pain in the a**...am I doing something wrong?

03-02-13, 11:56 AM	#9
TheRyeCatcher Swabbie Join Date: Oct 2012 Posts: 5 Downloads: 19 Uploads: 0	Got game via download from Gamestop. Did some searching online for the US version of 1.2 last night and again this morning...but no luck. Will continue searching. Thanks again for everyone's help.

03-02-13, 05:53 PM	#10
TheRyeCatcher Swabbie Join Date: Oct 2012 Posts: 5 Downloads: 19 Uploads: 0	Ok...uninstalled both the game and uplay...the downloaded both fresh with Gamestop app. Tried to launch the game without doing anything else; updater started automatically and patched the game to v1.1.5. Game launched fine after that, but still not at v2.0. Used the enabler to put all of the mods back in and game ran solid. Disabled all of the mods and clicked on the GUexe; game attempted to download the collector's edition patch to 2.0. It appeared as though the patch installed fine, but got a message saying "Silent Hunter has stopped working" and "Windows is searching for a solution" before everything went back to the desktop. When I try to launch the game at this point, I get the same error message that was in the first post on this thread. Gotta admit...I really don't think I did anything wrong here, but still am baffled about how to get this thing patched to v2.0 and be able to run. Any ideas, guys?

03-02-13, 07:19 PM	#11
Fifi Navy Seal Join Date: Dec 2012 Location: France Posts: 6,085 Downloads: 465 Uploads: 0	^^^^ All is running with admin rights? My 2 cents...