[REL] S3D - Silent 3ditor

propbeanie · 12-08-19, 05:36 PM

If that turm and other on-deck equipment are supposed to be on the submarine that is in the "water", then the node placements are "off" and the numbering relationships for such needs to be changed. However, the same problem exists in all of your screen grabs there that gap was referring to before, in that all the pictures have the same basic "perspective", in that it looks like the turm and deck gun etc., might be "stuck" to the top of your screen. If you could pull the camera back a bit further, so a person can see an overall of the sub in an image, and maybe do a close-up from the conn on the submarine, showing the relationship between it and what appears to be a turm "floating" in the sky?...

gap · 12-09-19, 09:05 AM

Quote:

Originally Posted by ErdiFerenc

Hi,
thanks for the answer.
Is the resolution too low or what is the matter?
So some more screens:
https://drive.google.com/open?id=1od...8Ej6M8YGYjYcAU

If i enable the normal map a strange white line appears on the hull.On one side of the line is the normal map good, but on the other side it is inverted.I looks like the silent hunter can not decide which side of the hull is up and which down and balls up the normal map.
Thanks

Hi again ErdiFerenc,

unfortunately making a diagnosis of your problem based on the pictures you have posted, is not an easy task. I see the white line on the port side of the hull (if I got you correctly that's your main issue), but it doesn't look like anything I have seen before. Provided that the 3D mesh you have imported is not flawed by some topological error which is worsened by the use of a normal map, the following tutorial on SH4 normal mapping might be of some use to you:

https://www.subsim.com/radioroom/sho...61&postcount=1

That's about all I can say without actually seeing your files. If you send them to me I might be able to offer you a better assistance

Quote:

Originally Posted by propbeanie

If that turm and other on-deck equipment are supposed to be on the submarine that is in the "water", then the node placements are "off" and the numbering relationships for such needs to be changed. However, the same problem exists in all of your screen grabs there that gap was referring to before, in that all the pictures have the same basic "perspective", in that it looks like the turm and deck gun etc., might be "stuck" to the top of your screen. If you could pull the camera back a bit further, so a person can see an overall of the sub in an image, and maybe do a close-up from the conn on the submarine, showing the relationship between it and what appears to be a turm "floating" in the sky?...

Hi propbeanie,

I think ErdiFerenc's unit is still a WIP. That floating conning tower seems to me a leftover from the submarine that he used as template for importing the Seehund, but let's focus on the normal map problem first

propbeanie · 12-09-19, 05:12 PM

Quote:

Originally Posted by gap

...
Hi propbeanie,

I think ErdiFerenc's unit is still a WIP. That floating conning tower seems to me a leftover from the submarine that he used as template for importing the Seehund, but let's focus on the normal map problem first

Aha! That would explain the "floating" turm...

ErdiFerenc · 12-17-19, 02:16 PM

Thank you Gap.
Your private message box is full, so i cannot send anything to you.

ErdiFerenc · 12-30-19, 02:21 PM

Gap could you delete some of your private messages?
thank you

CapZap1970 · 05-30-20, 01:52 PM

Hello:
I am trying to to use the S3D program to modify certain files in SH3 but for some reason I can´t install it. Every time I try it gives me error messages.
The error code is 2503 and 2502
I have Windows 10 installed

Any help with this is most welcome

Thanks.

CapZap

KaleunMarco · 05-30-20, 03:54 PM

Quote:

Originally Posted by CapZap1970

Hello:
I am trying to to use the S3D program to modify certain files in SH3 but for some reason I can´t install it. Every time I try it gives me error messages.
The error code is 2503 and 2502
I have Windows 10 installed

Any help with this is most welcome

Thanks.

CapZap

the install process is fairly straightforward. don't install from the unzip process.
try moving the zip file to c:\temp. then unzip it there. then launch the msi file.
good luck.

12-08-19, 05:36 PM	#1
propbeanie CTD - it's not just a job Join Date: May 2016 Location: One hour from Music City USA! Posts: 9,805 Downloads: 444 Uploads: 2	If that turm and other on-deck equipment are supposed to be on the submarine that is in the "water", then the node placements are "off" and the numbering relationships for such needs to be changed. However, the same problem exists in all of your screen grabs there that gap was referring to before, in that all the pictures have the same basic "perspective", in that it looks like the turm and deck gun etc., might be "stuck" to the top of your screen. If you could pull the camera back a bit further, so a person can see an overall of the sub in an image, and maybe do a close-up from the conn on the submarine, showing the relationship between it and what appears to be a turm "floating" in the sky?... __________________ "...and bollocks to the naysayer/s" - Jimbuna

05-30-20, 01:52 PM	#6
CapZap1970 Sea Lord Join Date: Mar 2007 Location: La Paz, Bolivia Posts: 1,956 Downloads: 260 Uploads: 51	Hello: I am trying to to use the S3D program to modify certain files in SH3 but for some reason I can´t install it. Every time I try it gives me error messages. The error code is 2503 and 2502 I have Windows 10 installed Any help with this is most welcome Thanks. CapZap __________________ Last edited by CapZap1970; 05-30-20 at 02:01 PM.

12-17-19, 02:16 PM	#4
ErdiFerenc Young fox with old tricks Join Date: Nov 2015 Location: Austro-Hungarian Empire Posts: 20 Downloads: 186 Uploads: 0	Thank you Gap. Your private message box is full, so i cannot send anything to you.

12-30-19, 02:21 PM	#5
ErdiFerenc Young fox with old tricks Join Date: Nov 2015 Location: Austro-Hungarian Empire Posts: 20 Downloads: 186 Uploads: 0	Gap could you delete some of your private messages? thank you