The Wolves of Steel: Bugs, glitches and issues thread - Page 31

wizard63 · 11-11-19, 04:24 PM

Hi:
I just installed the WS in my SH5 v 1.2 which runs perfectly in windows 10 64b.
I followed the installation steps and had no problem with it. the problem is that after I wait for the bar to load I pass a video that has different options. It doesn't matter which click I don't leave there and the video starts again. I would like to know if that is something simple to fix or else I do not complicate and uninstall everything.
If someone can guide me I am grateful. Thanks and best regards

vdr1981 · 11-11-19, 05:49 PM

Quote:

Originally Posted by wizard63

Hi:
I just installed the WS in my SH5 v 1.2 which runs perfectly in windows 10 64b.
I followed the installation steps and had no problem with it. the problem is that after I wait for the bar to load I pass a video that has different options. It doesn't matter which click I don't leave there and the video starts again. I would like to know if that is something simple to fix or else I do not complicate and uninstall everything.
If someone can guide me I am grateful. Thanks and best regards

Hi wizard63. It's most likely an installation problem. Try clean game/mod reinstallation again but use full administration rights this time...

wizard63 · 11-11-19, 07:07 PM

Quote:

Originally Posted by vdr1981

Hi wizard63. It's most likely an installation problem. Try clean game/mod reinstallation again but use full administration rights this time...

Thank you for taking time to answer me. Whenever I install any program I do it as an administrator. Should I uninstall everything? Anyway I could not continue where it is in SH5, right?

Karakenna · 11-15-19, 09:17 AM

Hi!

I reinstalled the game and mod 5 times already...
I have all admin rights and etc
Game version is 1.2

Every time I have this pop-up windows in menu and harbour...

What am I doing wrong?

vdr1981 · 11-15-19, 09:34 AM

Quote:

Originally Posted by Karakenna

Hi!

I reinstalled the game and mod 5 times already...
I have all admin rights and etc
Game version is 1.2

Every time I have this pop-up windows in menu and harbour...

What am I doing wrong?

Did you copy/paste your SH5 installation around your HDD?

Karakenna · 11-15-19, 10:15 AM

Quote:

Originally Posted by vdr1981

Did you copy/paste your SH5 installation around your HDD?

nope. You think it maybe coz of HDD?

Just reinstalled to other SSD. Same windows

Karakenna · 11-15-19, 01:02 PM

Quote:

Originally Posted by wizard63

Thank you for taking time to answer me. Whenever I install any program I do it as an administrator. Should I uninstall everything? Anyway I could not continue where it is in SH5, right?

yo. did you fix your problem? Got the game

vdr1981 · 11-15-19, 07:30 PM

Quote:

Originally Posted by Karakenna

nope. You think it maybe coz of HDD?

Just reinstalled to other SSD. Same windows

I have no idea Karakenna since I could never reproduce that issue on my system. Your problem is common for SH5/TWoS newcomers and it usually disappears after game/mod reinstallation. Yet, no newcomer was ever able to explain what was the problem with his game in the first place...

My guess is that you have problems with write protected install location or administration rights...But it's just a guess.

Karakenna · 11-16-19, 08:09 AM

Quote:

Originally Posted by vdr1981

I have no idea Karakenna since I could never reproduce that issue on my system. Your problem is common for SH5/TWoS newcomers and it usually disappears after game/mod reinstallation. Yet, no newcomer was ever able to explain what was the problem with his game in the first place...

My guess is that you have problems with write protected install location or administration rights...But it's just a guess.

Maybe. I see all the time the box in read only again is marked.
But I unchecked this.

THEBERBSTER · 11-16-19, 09:26 AM

Hi K
My Silent Hunter 5 folder is also read only.
Peter

Karakenna · 11-16-19, 09:52 AM

Quote:

Originally Posted by THEBERBSTER

Hi K
My Silent Hunter 5 folder is also read only.
Peter

Then I giving up

THEBERBSTER · 11-16-19, 11:30 AM

Hi K
PM sent.
Peter

LMD · 11-17-19, 06:02 AM

Hi 2 all!

It's been a while since I played SH5 and now I'm trying it with new TWoS. So far everything seems to be good except 1 disappointing message I have when in the bunker before campaign start.
But let's follow the treads rules before:
1. Operating System, System spec?
Windows 10 Pro 64 bit
I7-6700K 4.00 GHz, 32 Gb RAM, NVIDIA GeForce 1070 8 Gb GDDR5

2. Version of the game ? (DVD, Uplay download, Steam, other ?)
Uplay

3. Confirm that your game is updated to official v1.2.0 version and that the vanilla game works without problems.
Yes, it's v1.2.0 and plays well wo mods

4. If you use any non-TWoS custom mods, remove them, reinstall your game/TWoS completely according to install instruction, start new campaign and make sure that the issue still persist!
No custom mods are installed

5. Confirm that the Generic Patcher is correctly activated and the snapshot is successfully restored (Install instructions, step 2).
Confirm and snapshot was restored successfully

6. Provide a screenshot of your main Silent Hunter 5 installation folder and it's content!

7. JSGME screenshot!

8. Make sure to provide as much details as possible when describing situation where problem/bug/CTD can be observed. What should we do in order to reproduce this issue?
When I start new campaign I make a fresh savegame, then quit the game, reload the savegame and the message with campaign advance problem appears. See step 9 for screenshot.

9. Upload several screenshots and gamesaves on which problem can be observed.

Previously I read here on the forum that it's still in a test phase so not to worry about https://www.subsim.com/radioroom/sho...postcount=2245
So the question is it still in testing phase and I really don't need to worry about? Or did I smth wrong with installation and can I fix it?

Thank you in advance!

THEBERBSTER · 11-17-19, 06:13 AM

Hi LMD
Disable Mod 3 and try again.
Peter

vdr1981 · 11-17-19, 09:32 AM

Quote:

Originally Posted by LMD

So the question is it still in testing phase and I really don't need to worry about? Or did I smth wrong with installation and can I fix it?

Thank you in advance!

It's OK. That will happen sometimes with enabled " Campaign Advance Verifier Testing" addon.

Read it's description and disable it for now...

11-11-19, 04:24 PM	#451
wizard63 Swabbie Join Date: Nov 2019 Posts: 6 Downloads: 10 Uploads: 0	I can't leave the startup video Hi: I just installed the WS in my SH5 v 1.2 which runs perfectly in windows 10 64b. I followed the installation steps and had no problem with it. the problem is that after I wait for the bar to load I pass a video that has different options. It doesn't matter which click I don't leave there and the video starts again. I would like to know if that is something simple to fix or else I do not complicate and uninstall everything. If someone can guide me I am grateful. Thanks and best regards

11-16-19, 09:26 AM	#460
THEBERBSTER Growing Old Disgracefully Join Date: Dec 2012 Location: Hythe - Southampton Posts: 9,609 Downloads: 1133 Uploads: 0	Hi K My Silent Hunter 5 folder is also read only. Peter __________________ LSH3-2015 <> TUTORIALS <> ALL YOU NEED TO KNOW <> ALL IN ONE PLACE SH4 <> TUTORIALS <> HOW TO DO IT <> INFORMATION <> DOWNLOAD LINKS SH5 <> TUTORIALS <> HOW TO DO IT <> INFORMATION <> DOWNLOAD LINKS Always Here To Help A Fellow 'Subber' \| Need An Answer to A Question Just Send Me A PM

11-16-19, 11:30 AM	#462
THEBERBSTER Growing Old Disgracefully Join Date: Dec 2012 Location: Hythe - Southampton Posts: 9,609 Downloads: 1133 Uploads: 0	Hi K PM sent. Peter __________________ LSH3-2015 <> TUTORIALS <> ALL YOU NEED TO KNOW <> ALL IN ONE PLACE SH4 <> TUTORIALS <> HOW TO DO IT <> INFORMATION <> DOWNLOAD LINKS SH5 <> TUTORIALS <> HOW TO DO IT <> INFORMATION <> DOWNLOAD LINKS Always Here To Help A Fellow 'Subber' \| Need An Answer to A Question Just Send Me A PM

11-17-19, 06:02 AM	#463
LMD Cap'n Join Date: Mar 2007 Location: Ukraine Posts: 82 Downloads: 340 Uploads: 0	Strange message on the campaign start Hi 2 all! It's been a while since I played SH5 and now I'm trying it with new TWoS. So far everything seems to be good except 1 disappointing message I have when in the bunker before campaign start. But let's follow the treads rules before: 1. Operating System, System spec? Windows 10 Pro 64 bit I7-6700K 4.00 GHz, 32 Gb RAM, NVIDIA GeForce 1070 8 Gb GDDR5 2. Version of the game ? (DVD, Uplay download, Steam, other ?) Uplay 3. Confirm that your game is updated to official v1.2.0 version and that the vanilla game works without problems. Yes, it's v1.2.0 and plays well wo mods 4. If you use any non-TWoS custom mods, remove them, reinstall your game/TWoS completely according to install instruction, start new campaign and make sure that the issue still persist! No custom mods are installed 5. Confirm that the Generic Patcher is correctly activated and the snapshot is successfully restored (Install instructions, step 2). Confirm and snapshot was restored successfully 6. Provide a screenshot of your main Silent Hunter 5 installation folder and it's content! 7. JSGME screenshot! 8. Make sure to provide as much details as possible when describing situation where problem/bug/CTD can be observed. What should we do in order to reproduce this issue? When I start new campaign I make a fresh savegame, then quit the game, reload the savegame and the message with campaign advance problem appears. See step 9 for screenshot. 9. Upload several screenshots and gamesaves on which problem can be observed. Previously I read here on the forum that it's still in a test phase so not to worry about https://www.subsim.com/radioroom/sho...postcount=2245 So the question is it still in testing phase and I really don't need to worry about? Or did I smth wrong with installation and can I fix it? Thank you in advance! __________________

11-17-19, 06:13 AM	#464
THEBERBSTER Growing Old Disgracefully Join Date: Dec 2012 Location: Hythe - Southampton Posts: 9,609 Downloads: 1133 Uploads: 0	Hi LMD Disable Mod 3 and try again. Peter __________________ LSH3-2015 <> TUTORIALS <> ALL YOU NEED TO KNOW <> ALL IN ONE PLACE SH4 <> TUTORIALS <> HOW TO DO IT <> INFORMATION <> DOWNLOAD LINKS SH5 <> TUTORIALS <> HOW TO DO IT <> INFORMATION <> DOWNLOAD LINKS Always Here To Help A Fellow 'Subber' \| Need An Answer to A Question Just Send Me A PM

11-15-19, 09:17 AM	#454
Karakenna Swabbie Join Date: May 2014 Location: Russia Posts: 11 Downloads: 35 Uploads: 0	Hi! I reinstalled the game and mod 5 times already... I have all admin rights and etc Game version is 1.2 Every time I have this pop-up windows in menu and harbour... What am I doing wrong?