CTD while playing SH3

desertstriker · 08-08-13, 02:00 PM

I run ultamite and the only difference is the features such as language packs.

It is probably one of the mods it could have been corrupted during transer (assuming you used a backup to tranfer all your mods) I have had that happen before and the mod would need to be redownloaded.

conus00 · 09-09-13, 05:47 PM

I just found out an interesting fact: the game always crashes whenever I get close to imaginery line connecting Stavanger and Scapa Flow. Sometimes it crashes as soon as I leave Skagerrak for open sea.
That is VERY odd! Has anybody experienced anything similar?

sublynx · 09-10-13, 09:56 AM

Well I haven't but I do have a faint memory about a thread that discussed this.

Pisces · 09-10-13, 03:00 PM

Stavanger to Scapa Flow is the 59th northern parallel. That's odd if it is indeed related to lattitude. Does it also happen on the western side of Scotland or Ireland? Or in mid atlantic at that lattitude. Though, through the Skagerak into open (north) sea isn't really the 59th parallel. But the entrance of the Oslo-fjord is at the 59th, if that is what you meant. Try testing it with the navigation tutorial. Or some single mission in that region.

Whatever it is, I suggest making a seperate install of the game (dual install with multiSH if you must keep the old) and rebuild all the mods into it. But do so one at a time, and check if the problem re-occurs. Sometimes you just have to accept and cut your losses short. Time wasted will not return.

p.s. how did you transfer the game from XP into the Windows 7 system? Did you copy the game? As you can't really upgrade XP to 7. Windows 7 needs to be installed completely new.

Ehm, did you install the DirectX 9.0c in Windows 7? Eventhough Windows 7 comes with a later version of DirectX(which is supposed to be backwards compatible, but not really), installing 9.0c anyway solved some problems with older games on my end.

09-10-13, 03:10 PM

CTD will always happen with SH3 from time to time. If not on load than during gameplay, like using high TC with external cam on or scrolling a navigation map with mouse drag. Windows version has nothing to do with CTD u get.

Edited:

Assume there are no mod conflicts that could causes a CTD then,
it's the instability of SH3 itself (poor coding) that causes the problems with CTD most of the time.

conus00 · 10-03-13, 06:23 PM

So I did something smart: I borrowed my g/f's laptop and created fresh installation of SHIII+GWX3 with IDENTICAL modes I'm trying to run on my desktop... Guess what? It runs.

So obviously there is a problem with my desktop not related to any of the MODs. My next step would be to completely uninstall SHIII and start from scratch. By completely I mean cleaning the registry, careers... etc.

There used to be thread step-by-step how to completely uninstall SHIII from your computer but I cannot find it. Can somebody point me to it, please?

desertstriker · 10-03-13, 11:42 PM

I had that issue once though i could not uninstall either so i was royally screwed my solution was to 1 drop to real time just before getting to that "line" and B to save regulary. have not had a CTD at the line since then. I suspect it ha something to do with radio messages being GWX or Hsie patch related but since the problem was solved have not thought about it since then.

Rhodes · 10-04-13, 05:44 AM

Quote:

Originally Posted by conus00

There used to be thread step-by-step how to completely uninstall SHIII from your computer but I cannot find it. Can somebody point me to it, please?

Uninstall the game, delete the SH3 folder from the My Documents folder and then run a register cleaner, like CCleaner!

Are you running several mods or is just SH3 vanilla or Sh3+super mod?

BigWalleye · 10-04-13, 07:29 AM

Quote:

Originally Posted by sailor_X

CTD will always happen with SH3 from time to time. If not on load than during gameplay, like using high TC with external cam on or scrolling a navigation map with mouse drag. Windows version has nothing to do with CTD u get.

Edited:

Assume there are no mod conflicts that could causes a CTD then,
it's the instability of SH3 itself (poor coding) that causes the problems with CTD most of the time.

I beg to differ with your statement: "CTD will always happen with SH3 from time to time." If you have an environment which is adequate to run SH3, if you have the game properly installed and patched, and if you follow proper procedures regarding saving games, activating mods, and the use of SH3 Commander, then there is no reason to expect or tolerate either random or reproducible CTDs. If you are experiencing periodic CTDs, then something is interfering with the correct performance of your installation. Whether you choose to fix it or tolerate it is up to you, but it is not due to inherent instability in SH3.

I run SH3 with GWX3.0, Commander, and about two dozen mods. I run under Win7 in hardware of middling capabilities. I DID have a problem with CTDs, severe enough to make the game unplayable. After much work, I identified numerous factors contributing to my problem. Some of them were inherent mod conflicts. More were due to my own mistakes and oversights in installing and using mods, patches, and Commander - including failure to thoroughly RTFM. And I have forty years experience as a professional systems programmer and like to think of myself as fairly conscientious in that regard!

None of my problems was due to any inherent instability in SH3. Since repairing all the self-inflicted damage, I have experienced ONE CTD - when I broke a known rule about saving games to "save a little time." No other CTDs, random or systematic, since then. While I have not personally examined the source code, I have not found any evidence of errors in the code producing CTDs. The fact that there are so many gamers who play SH3 and post on this forum and so few who post accounts of problems would seem to bear this out.

SH3 is a complex system, and when you start modding it, there are many ways you can create problems for yourself. But, I don't think it is fair to say that the SH3 code has imbedded fatal errors, or that fatal errors, such as CTDs, must be tolerated when they occur. The errors are not inherent. They can be found and fixed, if you consider it worth your time to do so.

CAVEAT: I run SH3 with GWX3.0. I have NEVER run rock-stock SH3. But GWX does not change the game engine, sh3.exe, and the game engine is where the executable code lives. Everything else is data.

BassII · 10-05-13, 09:44 AM

Quote:

Originally Posted by BigWalleye

I beg to differ with your statement: "CTD will always happen with SH3 from time to time." If you have an environment which is adequate to run SH3, if you have the game properly installed and patched, and if you follow proper procedures regarding saving games, activating mods, and the use of SH3 Commander, then there is no reason to expect or tolerate either random or reproducible CTDs. If you are experiencing periodic CTDs, then something is interfering with the correct performance of your installation. Whether you choose to fix it or tolerate it is up to you, but it is not due to inherent instability in SH3.

I run SH3 with GWX3.0, Commander, and about two dozen mods. I run under Win7 in hardware of middling capabilities. I DID have a problem with CTDs, severe enough to make the game unplayable. After much work, I identified numerous factors contributing to my problem. Some of them were inherent mod conflicts. More were due to my own mistakes and oversights in installing and using mods, patches, and Commander - including failure to thoroughly RTFM. And I have forty years experience as a professional systems programmer and like to think of myself as fairly conscientious in that regard!

None of my problems was due to any inherent instability in SH3. Since repairing all the self-inflicted damage, I have experienced ONE CTD - when I broke a known rule about saving games to "save a little time." No other CTDs, random or systematic, since then. While I have not personally examined the source code, I have not found any evidence of errors in the code producing CTDs. The fact that there are so many gamers who play SH3 and post on this forum and so few who post accounts of problems would seem to bear this out.

SH3 is a complex system, and when you start modding it, there are many ways you can create problems for yourself. But, I don't think it is fair to say that the SH3 code has imbedded fatal errors, or that fatal errors, such as CTDs, must be tolerated when they occur. The errors are not inherent. They can be found and fixed, if you consider it worth your time to do so.

CAVEAT: I run SH3 with GWX3.0. I have NEVER run rock-stock SH3. But GWX does not change the game engine, sh3.exe, and the game engine is where the executable code lives. Everything else is data.

I must agree with sailor_X on this one.
SH3 GWX3 is a "funny sim" to play!
After reading this too
http://www.subsim.com/radioroom/show...=127164&page=2
i surely must say that CTD and errors occurs when you, in stress, suddently change views or something simular, nothing particular, the sim will crash and SH will close!
I did manage to solve my previous errors in the sim, but today i got a new one!
Error ID 1000. SH3 kernel.dll. Never saw it before, but i'm not surprised after seing all the others!
It's nice to see something new now and then, but what will be the next?
Never in stress anymore. I'll save everytime i shut down anything, and start over again. Also with all the radio msg i've recieved once before saving

09-10-13, 03:00 PM	#4
Pisces Silent Hunter Join Date: Dec 2004 Location: AN9771 Posts: 4,904 Downloads: 304 Uploads: 0	Stavanger to Scapa Flow is the 59th northern parallel. That's odd if it is indeed related to lattitude. Does it also happen on the western side of Scotland or Ireland? Or in mid atlantic at that lattitude. Though, through the Skagerak into open (north) sea isn't really the 59th parallel. But the entrance of the Oslo-fjord is at the 59th, if that is what you meant. Try testing it with the navigation tutorial. Or some single mission in that region. Whatever it is, I suggest making a seperate install of the game (dual install with multiSH if you must keep the old) and rebuild all the mods into it. But do so one at a time, and check if the problem re-occurs. Sometimes you just have to accept and cut your losses short. Time wasted will not return. p.s. how did you transfer the game from XP into the Windows 7 system? Did you copy the game? As you can't really upgrade XP to 7. Windows 7 needs to be installed completely new. Ehm, did you install the DirectX 9.0c in Windows 7? Eventhough Windows 7 comes with a later version of DirectX(which is supposed to be backwards compatible, but not really), installing 9.0c anyway solved some problems with older games on my end. Last edited by Pisces; 09-10-13 at 03:21 PM.

09-10-13, 03:10 PM	#5
sailor_X Stowaway Posts: n/a Downloads: Uploads:	CTD will always happen with SH3 from time to time. If not on load than during gameplay, like using high TC with external cam on or scrolling a navigation map with mouse drag. Windows version has nothing to do with CTD u get. Edited: Assume there are no mod conflicts that could causes a CTD then, it's the instability of SH3 itself (poor coding) that causes the problems with CTD most of the time. Last edited by sailor_X; 09-11-13 at 01:04 AM.

08-08-13, 02:00 PM	#1
desertstriker Eternal Patrol Join Date: May 2012 Location: mod soup bar and grill Posts: 1,756 Downloads: 998 Uploads: 0	I run ultamite and the only difference is the features such as language packs. It is probably one of the mods it could have been corrupted during transer (assuming you used a backup to tranfer all your mods) I have had that happen before and the mod would need to be redownloaded.

09-09-13, 05:47 PM	#2
conus00 Grey Wolf Join Date: May 2008 Location: DB85 Posts: 804 Downloads: 166 Uploads: 0	I just found out an interesting fact: the game always crashes whenever I get close to imaginery line connecting Stavanger and Scapa Flow. Sometimes it crashes as soon as I leave Skagerrak for open sea. That is VERY odd! Has anybody experienced anything similar?

09-10-13, 09:56 AM	#3
sublynx Sea Lord Join Date: Mar 2011 Location: In the conning tower of my VIIC scanning the sea through the periscope Posts: 1,698 Downloads: 173 Uploads: 7	Well I haven't but I do have a faint memory about a thread that discussed this.

10-03-13, 06:23 PM	#6
conus00 Grey Wolf Join Date: May 2008 Location: DB85 Posts: 804 Downloads: 166 Uploads: 0	So I did something smart: I borrowed my g/f's laptop and created fresh installation of SHIII+GWX3 with IDENTICAL modes I'm trying to run on my desktop... Guess what? It runs. So obviously there is a problem with my desktop not related to any of the MODs. My next step would be to completely uninstall SHIII and start from scratch. By completely I mean cleaning the registry, careers... etc. There used to be thread step-by-step how to completely uninstall SHIII from your computer but I cannot find it. Can somebody point me to it, please?

10-03-13, 11:42 PM	#7
desertstriker Eternal Patrol Join Date: May 2012 Location: mod soup bar and grill Posts: 1,756 Downloads: 998 Uploads: 0	I had that issue once though i could not uninstall either so i was royally screwed my solution was to 1 drop to real time just before getting to that "line" and B to save regulary. have not had a CTD at the line since then. I suspect it ha something to do with radio messages being GWX or Hsie patch related but since the problem was solved have not thought about it since then.