[REL]OpenHatch_V3_RH released - Page 95

Tweety · 01-04-10, 02:56 PM

Hello makman94,

I am going to try the second method of install that you mention. that should do the trick.

Quote:

MaGui
FM30_UpDown
DFa_UpDnRot_Flags_final
SH4StyleFlags
DD_OH_V3.09_20091209162038
DD_OH_V3.09_Fix_for_Anvart_FM30_UpDown
DD_OH_V3.09_ConningDeckCam_Fix_20091216221109
DD_OH v3.9 'fix' for MaGui

or

FM30_UpDown
DFa_UpDnRot_Flags_final
SH4StyleFlags
DD_OH_V3.09_20091209162038
DD_OH_V3.09_Fix_for_Anvart_FM30_UpDown
DD_OH_V3.09_ConningDeckCam_Fix_20091216221109
MaGui
DD_OH v3.9 'fix' for MaGui

by makman94

Thank you makman94 for your help

Tweety

=FI=Ghost · 01-05-10, 10:40 AM

Hello!

I have come across a problem. I've been trying to make the two mods work together (ACMOLCcombi and this mod) since the patch provided by the author of this great mod didn't work for me.

I have been successful with making things look right (in periscope views) but now I have lost the ability to move periscopes, both attack and observation one. They go up and down normally, but when I enter periscope view I cannot move the view, neither with mouse nor keyboard. Could someone tell me where in commands_eng and/or cameras.dat files are the commands that control the periscope movement? (I don't know what I have done wrong)

DivingDuck · 01-05-10, 12:34 PM

Moin =FI=Ghost,

can you post a screenie of JSGME please?

The cameras.dat is not the file to examine when it comes to periscope controls. You´d better check the commands.cfg and menu1024.ini files. Unfortunately I can´t tell you much about where to search as my knowledge of these files is very limited. But I can assure you that I did not apply any changes to the menu1024.ini.

This however is something you might want to try:

enable OH on top of ACMOLC
copy the commands.cfg and cameras.dat of ACMOLC to the approriate folders
open commands.cfg with any text editor and ad/alter the entries as described on page #4 of this DD_OH_V3.09_InstallationManual.

Regards,
DD

=FI=Ghost · 01-05-10, 01:51 PM

Quote:

Originally Posted by DivingDuck

Moin =FI=Ghost,

can you post a screenie of JSGME please?

The cameras.dat is not the file to examine when it comes to periscope controls. You´d better check the commands.cfg and menu1024.ini files. Unfortunately I can´t tell you much about where to search as my knowledge of these files is very limited. But I can assure you that I did not apply any changes to the menu1024.ini.

This however is something you might want to try:

enable OH on top of ACMOLC
copy the commands.cfg and cameras.dat of ACMOLC to the approriate folders
open commands.cfg with any text editor and ad/alter the entries as described on page #4 of this DD_OH_V3.09_InstallationManual.

Regards,
DD

Thank you for your quick reply DD!

I did what you told me to - installed ACMOLCcombi, copied it's commands.cfg and camera.dat into your OH mod folder, edited commands.cfg as stated in the manual and then installed your OH and now it works fine.

Here's a screenshot of my JSGME:

DivingDuck · 01-05-10, 04:54 PM

Glad it worked. But I forgot to tell you that there is a downside you have to cope with. Some of the features related to cameras.dat will not work any more. But I guess that´s not a problem that really bothers you.

Regards,
DD

=FI=Ghost · 01-06-10, 03:46 PM

Quote:

Originally Posted by DivingDuck

Glad it worked. But I forgot to tell you that there is a downside you have to cope with. Some of the features related to cameras.dat will not work any more. But I guess that´s not a problem that really bothers you.

Regards,
DD

You were right, when I used cameras.dat from the ACM/OLC mod, the free camera in the submarine didn't work anymore. So I edited the camera.dat file from your mod and used it instead of the above, and now everything seems to work well. No more problems with the periscopes, and I have the free roaming camera again.

Thanx for this excellent mod!

sabretwo · 01-06-10, 09:51 PM

Quote:

Originally Posted by DivingDuck

Hey Rhodes,

I don´t use SH3 Commander. So I can´t tell what the problem is. Is there a way to save your patrol and use another type for testing, with SH3 Commander? TypeVII/C is the type I´m doing all tests with. So, I´m really perplexed to see you reporting this one is THE one to have problems.

Regards,
DD

I also have been having trouble with the hatch opening or closing when running SH3 Commander. I tested it both ways (with and without Commander) and its definitely Sh3 Commander modifying the Commands_en.cfg.

I posted a question to JScones in hope that this can be easily fixed. Hopefully, he'll be able to shed more light on what Commander is doing.

JScones · 01-07-10, 04:01 AM

Isn't your problem answered a few times back on page 56 (keep reading after the post you've quoted)?

Magic1111 · 01-07-10, 04:51 AM

Quote:

Originally Posted by sabretwo

I also have been having trouble with the hatch opening or closing when running SH3 Commander. I tested it both ways (with and without Commander) and its definitely Sh3 Commander modifying the Commands_en.cfg.

I posted a question to JScones in hope that this can be easily fixed. Hopefully, he'll be able to shed more light on what Commander is doing.

Hello !

I play in a multi-installation GWX3.0, WAC 4.1 and LSH v5, all in connection with the SH3 Commander and DD's OH-MOD 3.09. And everything works perfectly, I have no problems!

Best regards,
Magic

Kimmers · 01-07-10, 08:44 AM

ah, so its commander? what a shame

sabretwo · 01-07-10, 09:54 AM

Quote:

Originally Posted by JScones

Isn't your problem answered a few times back on page 56 (keep reading after the post you've quoted)?

Perhaps, but I don't think so. If your referring to the Malfunctions option, I have malfinctions deactivated and I still have the problem.

The only items that I have selected from options at the moment are randomize crush depth, randomize days in base, and randomize gramaphone tracks.

GOZO · 01-07-10, 06:00 PM

@ DD;

Check your personal messages. I think we now have a patch for ACM as well

.

Cheers

/GOZO

Tarnsman · 01-07-10, 07:48 PM

So should extended freecam 1.2 be installed before or after OH 3.09 or is it not needed?

JScones · 01-08-10, 01:02 AM

Quote:

Originally Posted by sabretwo

Perhaps, but I don't think so. If your referring to the Malfunctions option, I have malfinctions deactivated and I still have the problem.

The only items that I have selected from options at the moment are randomize crush depth, randomize days in base, and randomize gramaphone tracks.

Well, you stated above that "its definitely Sh3 Commander modifying the Commands_en.cfg", so perhaps as a start you could post the differences that you noticed that SH3Cmdr made to "Commands_en.cfg" that led you to that definite conclusion? Because such changes must have been manually introduced to SH3Cmdr (ie through you installing a mod into SH3Cmdr that modifies "Static settings.cfg" or "Randomised events.cfg"). So posting the changes you observed may help someone point you in the right direction.

Beyond that, as others appear to be happily running this mod with SH3Cmdr (recognising the non-SH3Cmdr based problem mentioned on page 56), you may want to review the integrity of your SH3 installation - have you got automatic rollback selected in SH3Cmdr, etc etc...

sabretwo · 01-08-10, 03:18 AM

Quote:

Originally Posted by JScones

Well, you stated above that "its definitely Sh3 Commander modifying the Commands_en.cfg", so perhaps as a start you could post the differences that you noticed that SH3Cmdr made to "Commands_en.cfg" that led you to that definite conclusion? Because such changes must have been manually introduced to SH3Cmdr (ie through you installing a mod into SH3Cmdr that modifies "Static settings.cfg" or "Randomised events.cfg"). So posting the changes you observed may help someone point you in the right direction.

Beyond that, as others appear to be happily running this mod with SH3Cmdr (recognising the non-SH3Cmdr based problem mentioned on page 56), you may want to review the integrity of your SH3 installation - have you got automatic rollback selected in SH3Cmdr, etc etc...

I am somewhat mystified by this problem. I have tried it both ways (with and without Commander) several times now and get the same consistent results.

Normally I do rollbacks automatically.

The version I am using of SH3 Commander is unaltered with the exception of adding the GWX and OLC Commander files. I wonder if this might be the problem?

I am going to try some experiements and start unchecking items to see if it isolates the problem. I'll also look at the Commands_en.cfg when the game is running with SH3 Commander and see if DD's commands are there as described in his PDF readme.

Thanks for the input.

01-05-10, 10:40 AM	#1412
=FI=Ghost Gunner Join Date: May 2009 Location: Temerin, Serbia/Günzburg, Germany. Posts: 99 Downloads: 93 Uploads: 0	Hello! I have come across a problem. I've been trying to make the two mods work together (ACMOLCcombi and this mod) since the patch provided by the author of this great mod didn't work for me. I have been successful with making things look right (in periscope views) but now I have lost the ability to move periscopes, both attack and observation one. They go up and down normally, but when I enter periscope view I cannot move the view, neither with mouse nor keyboard. Could someone tell me where in commands_eng and/or cameras.dat files are the commands that control the periscope movement? (I don't know what I have done wrong) __________________ Bury me at sea where no murdered ghosts can haunt me, if I rock upon the waves then no corpse can lay upon me.

01-05-10, 12:34 PM	#1413
DivingDuck Grey Wolf Join Date: Jul 2006 Location: Germany Posts: 902 Downloads: 10 Uploads: 1	Moin =FI=Ghost, can you post a screenie of JSGME please? The cameras.dat is not the file to examine when it comes to periscope controls. You´d better check the commands.cfg and menu1024.ini files. Unfortunately I can´t tell you much about where to search as my knowledge of these files is very limited. But I can assure you that I did not apply any changes to the menu1024.ini. This however is something you might want to try: enable OH on top of ACMOLC copy the commands.cfg and cameras.dat of ACMOLC to the approriate folders open commands.cfg with any text editor and ad/alter the entries as described on page #4 of this DD_OH_V3.09_InstallationManual. Regards, DD __________________ http://www.filefront.com/user/DivingDuck \| OpenHatch_V3_RH (SHIII)

01-05-10, 04:54 PM	#1415
DivingDuck Grey Wolf Join Date: Jul 2006 Location: Germany Posts: 902 Downloads: 10 Uploads: 1	Glad it worked. But I forgot to tell you that there is a downside you have to cope with. Some of the features related to cameras.dat will not work any more. But I guess that´s not a problem that really bothers you. Regards, DD __________________ http://www.filefront.com/user/DivingDuck \| OpenHatch_V3_RH (SHIII)

01-07-10, 08:44 AM	#1420
Kimmers Bosun Join Date: Nov 2009 Location: in the desert yo Posts: 63 Downloads: 32 Uploads: 0	ah, so its commander? what a shame __________________

01-07-10, 06:00 PM	#1422
GOZO Commander Join Date: Aug 2004 Location: Linkoping, Sweden Posts: 479 Downloads: 176 Uploads: 0	@ DD; Check your personal messages. I think we now have a patch for ACM as well. Cheers /GOZO __________________ SHIV:TMo 2.5, RSRD, SCAF OLC, Ralle's modpack SHIV: WDAD, Med Campaign SHIII: GWX3 GOLD, OLCII Gold, ACM-reloaded interface mod, SHIIIcmndr 3.2, Full Realism/DiD SHIII: LSH3 2015 Cold Waters with all bells and whistles Finally SHV but still unmodded and still a noob....

01-07-10, 04:01 AM	#1418
JScones Navy Seal Join Date: Apr 2005 Posts: 5,501 Downloads: 19 Uploads: 0	Isn't your problem answered a few times back on page 56 (keep reading after the post you've quoted)?

01-07-10, 07:48 PM	#1423
Tarnsman Electrician's Mate Join Date: Aug 2005 Posts: 134 Downloads: 48 Uploads: 0	So should extended freecam 1.2 be installed before or after OH 3.09 or is it not needed?