coning tower emblem,a tutorial

the_belgian · 06-03-07, 04:35 AM

How to get an emblem on your coning tower
If you would like to add an emblem and/or victories on your coning tower here is a small tutorial on how to do that.
1-- go to ubisoft/Silent Hunter 4 Wolves of the Pacific/data/textures/tnormal/tex
2--copy the folowing files to a new map "coning towers" placed in,for instance "documents"(or another place you'll find them).
NSS_BalaoTower_T01
NSS_GatoTower_T01
NSS_PclassTower_T01
NSS_SalmonSargoTower_T01
NSS_SClass_Tower_T01
NSS_TamborTower_T01
these are the black coning towers
and
NSS_BalaoTower_T02
NSS_GatoTower_T02
NSS_PclassTower_T02
NSS_SalmonSargoTower_T02
NSS_SClass_Tower_T02
NSS_TamborTower_T02
these are the blue-grey coning towers
note:If you play using low-res textures you'll need to edit the files in the \TLowRes\tex directory instead of the \TNormal\tex directory.
now you need a convertor in order to open these skins,change them into BMP,rework them and change back into DDS.
I,personaly use the DxtBmp i got at http://www.softpedia.com/get/Multime...s/DXTBmp.shtml
After installing it open the NSS file(in your save map)you want to change with the converter and save in the same map as BMP.
(for the folowing text i added some explanational pictures,showing the concerning part off the NSS- picture)
With a paint programm you can add a picture onto the coning tower.
How to add a picture and where to place it.
first select a picture cut it out for better result.
Numbers and text are better left out since on one side they would be mirrored.
open the BMP with the coning tower.
Paste the picture on the coning tower,for best result in the vertical mirrored U.
Be sure it is faced RIGHT! that is the front of the tower.
You can also add your victories using the templates below.
Since you will proberly down more merchants than navy-ships i advice to place the merchant vics. at the left of your emblem
and the navy kills to the right,but no further than the white line on the right in the pic. below.
Happy with the result?Save as BMP in a sub-map in the map "coning towers"
Open the DXTBmp converter and open the map "coning towers",go to the sub-map and open your new made drawing.
Save as DDS
close all used programms(since you are ready with them)and copy the DDS you just made into
ubisoft/Silent Hunter 4 Wolves of the Pacific/data/textures/tnormal/tex .You will be asked to replace the existing file,wich you
safely can do since you still have a backup in your "coning towers"-map.
Start SH4 and enjoy YOUR vessel!

aditional pictures

this pic you can use to cut and paste victory-signs
flags for:merchant and IJN
side view for:merchant / DD's and gunboats / cruisers / carriers

<enjoy!

repalankas · 06-03-07, 05:50 AM

Thank you, this is very useful, click here for a slight modification and spanish translation.

http://www.24flotilla.com/html/modul...wtopic&t=22076

MONOLITH · 06-03-07, 06:37 AM

Excellent! Thank you. I've been thinking a lot about some of the cool SH3 ones we used to have.

I have a feeling this will be moved to the mods forum soon.

MONOLITH · 06-03-07, 06:43 AM

Cool emblem ideas here....

http://www.subsim.com/radioroom/showthread.php?t=100680

the_belgian · 06-03-07, 07:18 AM

Quote:

Originally Posted by repalankas

Thank you, this is very useful, click here for a slight modification and spanish translation.

http://www.24flotilla.com/html/modul...wtopic&t=22076

Nice translation job(as far as my spanish goes)but would you mind adding the original auteurs name (the_belgian,Subsim forum) and a the link to this tread?

Shyzar · 06-03-07, 02:46 PM

I can't get the picture with the flags and side views to enlarge. It takes me to this place, asking me whether I want to uipload a picture. Is there a way to findan enlarged version in a good resolution?

CaptainCox · 06-03-07, 03:37 PM

Quote:

Originally Posted by Shyzar

I can't get the picture with the flags and side views to enlarge. It takes me to this place, asking me whether I want to uipload a picture. Is there a way to findan enlarged version in a good resolution?

Bump!

Shyzar · 06-03-07, 08:01 PM

For anyone who wants a free bitmap editor, here's the link:http://www.pabird.supanet.com/ With this program it needs to be a 24 bit bitmap if anyone didn't already know this.

the_belgian · 06-04-07, 09:22 AM

Quote:

Originally Posted by Shyzar

I can't get the picture with the flags and side views to enlarge. It takes me to this place, asking me whether I want to uipload a picture. Is there a way to findan enlarged version in a good resolution?

The way they look in the 5th example is the size those apear ingame.

http://www.subsim.com/radioroom/showthread.php?t=115874 reply n°10

repalankas · 06-09-07, 07:19 AM

Belgian: sorry for the mistake on the link to this post. It is already corrected.

Thank you very much.

06-03-07, 04:35 AM	#1
the_belgian Commander Join Date: May 2007 Location: a mile behind the sign"end of civilisation" Posts: 444 Downloads: 24 Uploads: 0	coning tower emblem,a tutorial How to get an emblem on your coning tower If you would like to add an emblem and/or victories on your coning tower here is a small tutorial on how to do that. 1-- go to ubisoft/Silent Hunter 4 Wolves of the Pacific/data/textures/tnormal/tex 2--copy the folowing files to a new map "coning towers" placed in,for instance "documents"(or another place you'll find them). NSS_BalaoTower_T01 NSS_GatoTower_T01 NSS_PclassTower_T01 NSS_SalmonSargoTower_T01 NSS_SClass_Tower_T01 NSS_TamborTower_T01 these are the black coning towers and NSS_BalaoTower_T02 NSS_GatoTower_T02 NSS_PclassTower_T02 NSS_SalmonSargoTower_T02 NSS_SClass_Tower_T02 NSS_TamborTower_T02 these are the blue-grey coning towers note:If you play using low-res textures you'll need to edit the files in the \TLowRes\tex directory instead of the \TNormal\tex directory. now you need a convertor in order to open these skins,change them into BMP,rework them and change back into DDS. I,personaly use the DxtBmp i got at http://www.softpedia.com/get/Multime...s/DXTBmp.shtml After installing it open the NSS file(in your save map)you want to change with the converter and save in the same map as BMP. (for the folowing text i added some explanational pictures,showing the concerning part off the NSS- picture) With a paint programm you can add a picture onto the coning tower. How to add a picture and where to place it. first select a picture cut it out for better result. Numbers and text are better left out since on one side they would be mirrored. open the BMP with the coning tower. Paste the picture on the coning tower,for best result in the vertical mirrored U. Be sure it is faced RIGHT! that is the front of the tower. You can also add your victories using the templates below. Since you will proberly down more merchants than navy-ships i advice to place the merchant vics. at the left of your emblem and the navy kills to the right,but no further than the white line on the right in the pic. below. Happy with the result?Save as BMP in a sub-map in the map "coning towers" Open the DXTBmp converter and open the map "coning towers",go to the sub-map and open your new made drawing. Save as DDS close all used programms(since you are ready with them)and copy the DDS you just made into ubisoft/Silent Hunter 4 Wolves of the Pacific/data/textures/tnormal/tex .You will be asked to replace the existing file,wich you safely can do since you still have a backup in your "coning towers"-map. Start SH4 and enjoy YOUR vessel! aditional pictures this pic you can use to cut and paste victory-signs flags for:merchant and IJN side view for:merchant / DD's and gunboats / cruisers / carriers <enjoy! Last edited by the_belgian; 06-03-07 at 05:34 AM.

06-03-07, 06:37 AM	#3
MONOLITH Grey Wolf Join Date: Nov 2002 Posts: 997 Downloads: 0 Uploads: 0	Excellent! Thank you. I've been thinking a lot about some of the cool SH3 ones we used to have. I have a feeling this will be moved to the mods forum soon. __________________

06-03-07, 06:43 AM	#4
MONOLITH Grey Wolf Join Date: Nov 2002 Posts: 997 Downloads: 0 Uploads: 0	Cool emblem ideas here.... http://www.subsim.com/radioroom/showthread.php?t=100680 __________________

06-03-07, 02:46 PM	#6
Shyzar Engineer Join Date: Apr 2007 Location: Surrey, British Columbia Posts: 214 Downloads: 7 Uploads: 0	Picture Link doesn't work I can't get the picture with the flags and side views to enlarge. It takes me to this place, asking me whether I want to uipload a picture. Is there a way to findan enlarged version in a good resolution? __________________ Since ancient times, there has never been a war that did not have a political character. -Máo Zédong Friction is the only concept that more or less corresponds to the factors that distinguish real war from war on paper. -Carl von Clausewitz

06-03-07, 08:01 PM	#8
Shyzar Engineer Join Date: Apr 2007 Location: Surrey, British Columbia Posts: 214 Downloads: 7 Uploads: 0	For anyone who wants a free bitmap editor, here's the link:http://www.pabird.supanet.com/ With this program it needs to be a 24 bit bitmap if anyone didn't already know this. __________________ Since ancient times, there has never been a war that did not have a political character. -Máo Zédong Friction is the only concept that more or less corresponds to the factors that distinguish real war from war on paper. -Carl von Clausewitz Last edited by Shyzar; 06-03-07 at 08:23 PM.

06-03-07, 05:50 AM	#2
repalankas Watch Join Date: Jun 2007 Location: Valencia, Spain Posts: 23 Downloads: 12 Uploads: 0	Thank you, this is very useful, click here for a slight modification and spanish translation. http://www.24flotilla.com/html/modul...wtopic&t=22076

06-09-07, 07:19 AM	#10
repalankas Watch Join Date: Jun 2007 Location: Valencia, Spain Posts: 23 Downloads: 12 Uploads: 0	Belgian: sorry for the mistake on the link to this post. It is already corrected. Thank you very much.