First time setup

Gogs · 10-18-06, 04:01 AM

Hi to the forum

My apologies for the newbie question but I have searched the forum and couldn't find a similar question or opinion (and it isn't a RTFM one either).

What Mods would people recommend installing right away? I have limited time to enjoy the game and would like to find a realistic but not too hard setup from the start. I enjoy the immersion into character and so dont want to change things once in a campaign. Saying that I do tend to play DiD and so starting again is unlikely to be completely out of the question.

Any suggestions gratefully received.

Ta

danlisa · 10-18-06, 04:10 AM

Welcome,

Have a look at this thread...
http://www.subsim.com/radioroom/showthread.php?t=99039

I would guide you toward GW 1.1a as it has an auto-installer and is very simple to setup. You may have to check the official GW thread in the mods section to get the best download location.

Gogs · 10-18-06, 09:11 AM

Thanks.

So much for searching the forum, I never saw that thread

. The community here seems so active and the mods are generally raved about so well I wanted to make a decision asap as to what would be a good way to go. Not that I hear folk "dissing" the vanilla version but with all the tweaks and changes by real enthusiasts I dont think I can justify playing 200 hours of that before I check out the mods. Anyway I had a look at the GW website and they are firm favourites at this stage.

Thanks again for the nudge in the right direction.

G

kylania · 10-18-06, 09:43 AM

First install SH3.
Second patch to v1.4b.
Third install JSGME (Run it twice to make the MODS folder and capture a snapshot).
Fourth copy MultiSH3 and SH3Weather into your install directory. Don't run either.
Fifth install SH3 Commander but don't start it.

At this point COPY the entire folder to something else like C:\program files\ubisoft\mysh3 Leaving behind a pristine, mod ready, install of SH3 you can copy again when you want to try a different supermod or have stuffed your mysh3 install so badly you need to start again.

Install any mods you wanted to try out into the mysh3 folder using JSGME.
Run MultiSH3 in your mysh3 folder and give it a unique 3 letter name for Careers for that install only.
Run SH3 for the first time to create your new career folder structure, exit immediately.
Add ' /l:"C:\program files\ubisoft\mysh3"' to the end of your SH3 Commander install shortcut.
Run SH3 using SH3 Commander, your custom mods and custom careers. SH3 Weather will be autodetected and start right before you enter the game.
Enjoy!

What you'll probably do is say "omg, that's too complicated, forget it!" and run GW 1.1a's wonderful install program which works effortlessly. After you've enjoyed GW to the fullest and/or destroyed your install playing around with other joyous mods (not all of which will work with each other), come back here and try it this way.

It's more work, but it's far more expandable.

Gogs · 10-18-06, 10:04 AM

omg...... (wait, deja vu!)

Yep sounds more complicated than I'd like but not so bad that I wont chance it. Thanks for the step-by-step, it is appreciated.

G

Jimbuna · 10-18-06, 11:54 AM

Welcome aboard Gogs...you might want to heed kylania's sound advice

Me...I've got a hunch you'll love GW

Good luck

robj250 · 10-18-06, 01:31 PM

Welcome aboard Gogs. Since March of this year (when I first installed SH3) I have run a vanilla SH3 patched 1.4 and heavily modded. I really enjoyed it.

This month, I installed TGW1.1a and am at present running my first patrol. SO far I like it, but I have problems with SH3 CMDR 2.5 making my crew list and personnel file. CMDR works fine with my other career (mentioned at first).

Hope to be able to get CMDR 2.5 to work with TGW as I need a crew list and the ability to manage the crew.

AVGWarhawk · 10-18-06, 02:24 PM

I too did the vanilla and patch. Added a mod or two. Put the game on the shelf for a year. Popped it in when I had seen the 1.1 GW super mod. I have not stopped playing since. I totally stopped playing IL2 and I never thought that would happen. Yesterday I installed Sober's 3D water found over on the mods page. Works fine with 1.1 GW. Awesome!

robj250 · 10-18-06, 07:20 PM

Quote:

Originally Posted by AVGWarhawk

I too did the vanilla and patch. Added a mod or two. Put the game on the shelf for a year. Popped it in when I had seen the 1.1 GW super mod. I have not stopped playing since. I totally stopped playing IL2 and I never thought that would happen. Yesterday I installed Sober's 3D water found over on the mods page. Works fine with 1.1 GW. Awesome!

Hi. You mention Sober's 3D water mod. I tried looking for it but cannot find it. Do you know where the thread to the mod? I am using TGW1.1a.

What does that mod do to the water?

Is it similar to Kriller's Water?

_Seth_ · 10-18-06, 07:29 PM

Quote:

Originally Posted by robj250

Quote:

Originally Posted by AVGWarhawk

I too did the vanilla and patch. Added a mod or two. Put the game on the shelf for a year. Popped it in when I had seen the 1.1 GW super mod. I have not stopped playing since. I totally stopped playing IL2 and I never thought that would happen. Yesterday I installed Sober's 3D water found over on the mods page. Works fine with 1.1 GW. Awesome!

Hi. You mention Sober's 3D water mod. I tried looking for it but cannot find it. Do you know where the thread to the mod? I am using TGW1.1a.

What does that mod do to the water?

Is it similar to Kriller's Water?

If it is sobers 3d wave mod, its here : http://www.subsim.com/radioroom/show...highlight=wave

Zero Niner · 10-18-06, 08:20 PM

I'd suggest just updating to 1.4b version first using the aforesaid patch. Then do the training academy missions & complete the exams. Then install the supermods of your choice.
This way you can start any career with 1500 renown. Putting in a supermod before completing the academy may result in less renown, as sone of the mods make it more difficult to sink ships.

IceGrog · 10-21-06, 02:24 PM

Quote:

Originally Posted by kylania

First install SH3.
Second patch to v1.4b.
Third install JSGME (Run it twice to make the MODS folder and capture a snapshot).
Fourth copy MultiSH3 and SH3Weather into your install directory. Don't run either.
Fifth install SH3 Commander but don't start it.

ok......... i found "MultiSH3 and SH3Weather"
but where is this JSGME at?

_Seth_ · 10-21-06, 02:28 PM

JSGME or JoneSofts generic mod enabler ( i think) is on the subsim downloads pages. And now, its saturday, off to hit the bar!!!

Jimbuna · 10-22-06, 09:45 AM

Look for any post by JScones...theres always a link on his sig...or use the search for 'SH3 Commander'

10-18-06, 04:01 AM	#1
Gogs Watch Join Date: Oct 2006 Posts: 29 Downloads: 0 Uploads: 0	First time setup Hi to the forum My apologies for the newbie question but I have searched the forum and couldn't find a similar question or opinion (and it isn't a RTFM one either). What Mods would people recommend installing right away? I have limited time to enjoy the game and would like to find a realistic but not too hard setup from the start. I enjoy the immersion into character and so dont want to change things once in a campaign. Saying that I do tend to play DiD and so starting again is unlikely to be completely out of the question. Any suggestions gratefully received. Ta

10-18-06, 04:10 AM	#2
danlisa Navy Seal Join Date: Oct 2005 Location: Cornwall, UK Posts: 5,499 Downloads: 45 Uploads: 1	Welcome, Have a look at this thread... http://www.subsim.com/radioroom/showthread.php?t=99039 I would guide you toward GW 1.1a as it has an auto-installer and is very simple to setup. You may have to check the official GW thread in the mods section to get the best download location. __________________

10-18-06, 09:11 AM	#3
Gogs Watch Join Date: Oct 2006 Posts: 29 Downloads: 0 Uploads: 0	Thanks. So much for searching the forum, I never saw that thread. The community here seems so active and the mods are generally raved about so well I wanted to make a decision asap as to what would be a good way to go. Not that I hear folk "dissing" the vanilla version but with all the tweaks and changes by real enthusiasts I dont think I can justify playing 200 hours of that before I check out the mods. Anyway I had a look at the GW website and they are firm favourites at this stage. Thanks again for the nudge in the right direction. G

10-18-06, 09:43 AM	#4
kylania Silent Hunter Join Date: Aug 2006 Posts: 3,528 Downloads: 118 Uploads: 0	First install SH3. Second patch to v1.4b. Third install JSGME (Run it twice to make the MODS folder and capture a snapshot). Fourth copy MultiSH3 and SH3Weather into your install directory. Don't run either. Fifth install SH3 Commander but don't start it. At this point COPY the entire folder to something else like C:\program files\ubisoft\mysh3 Leaving behind a pristine, mod ready, install of SH3 you can copy again when you want to try a different supermod or have stuffed your mysh3 install so badly you need to start again. Install any mods you wanted to try out into the mysh3 folder using JSGME. Run MultiSH3 in your mysh3 folder and give it a unique 3 letter name for Careers for that install only. Run SH3 for the first time to create your new career folder structure, exit immediately. Add ' /l:"C:\program files\ubisoft\mysh3"' to the end of your SH3 Commander install shortcut. Run SH3 using SH3 Commander, your custom mods and custom careers. SH3 Weather will be autodetected and start right before you enter the game. Enjoy! What you'll probably do is say "omg, that's too complicated, forget it!" and run GW 1.1a's wonderful install program which works effortlessly. After you've enjoyed GW to the fullest and/or destroyed your install playing around with other joyous mods (not all of which will work with each other), come back here and try it this way. It's more work, but it's far more expandable. __________________

10-18-06, 11:54 AM	#6
Jimbuna Chief of the Boat Join Date: Feb 2006 Location: 250 metres below the surface Posts: 190,473 Downloads: 63 Uploads: 13	Welcome aboard Gogs...you might want to heed kylania's sound advice Me...I've got a hunch you'll love GW Good luck __________________ Wise men speak because they have something to say; Fools because they have to say something. Oh my God, not again!!

10-18-06, 10:04 AM	#5
Gogs Watch Join Date: Oct 2006 Posts: 29 Downloads: 0 Uploads: 0	omg...... (wait, deja vu!) Yep sounds more complicated than I'd like but not so bad that I wont chance it. Thanks for the step-by-step, it is appreciated. G

10-18-06, 01:31 PM	#7
robj250 Sea Lord Join Date: Mar 2006 Location: Port Hardy, BC, Canada 75 yo with M.S. & C.O.P.D. & heart problems Posts: 1,930 Downloads: 1 Uploads: 0	Welcome aboard Gogs. Since March of this year (when I first installed SH3) I have run a vanilla SH3 patched 1.4 and heavily modded. I really enjoyed it. This month, I installed TGW1.1a and am at present running my first patrol. SO far I like it, but I have problems with SH3 CMDR 2.5 making my crew list and personnel file. CMDR works fine with my other career (mentioned at first). Hope to be able to get CMDR 2.5 to work with TGW as I need a crew list and the ability to manage the crew.

10-18-06, 02:24 PM	#8
AVGWarhawk Lucky Jack Join Date: Jun 2005 Location: In a 1954 Buick. Posts: 28,253 Downloads: 90 Uploads: 0	I too did the vanilla and patch. Added a mod or two. Put the game on the shelf for a year. Popped it in when I had seen the 1.1 GW super mod. I have not stopped playing since. I totally stopped playing IL2 and I never thought that would happen. Yesterday I installed Sober's 3D water found over on the mods page. Works fine with 1.1 GW. Awesome! __________________ “You're painfully alive in a drugged and dying culture.” ― Richard Yates, Revolutionary Road

10-18-06, 08:20 PM	#11
Zero Niner Ace of the Deep Join Date: Apr 2005 Posts: 1,033 Downloads: 69 Uploads: 0	I'd suggest just updating to 1.4b version first using the aforesaid patch. Then do the training academy missions & complete the exams. Then install the supermods of your choice. This way you can start any career with 1500 renown. Putting in a supermod before completing the academy may result in less renown, as sone of the mods make it more difficult to sink ships.

10-21-06, 02:28 PM	#13
_Seth_ Ocean Warrior Join Date: Dec 2005 Location: In Tromsoe, @Tirpitz' final resting place.. Posts: 3,277 Downloads: 94 Uploads: 0	JSGME or JoneSofts generic mod enabler ( i think) is on the subsim downloads pages. And now, its saturday, off to hit the bar!!! __________________

10-22-06, 09:45 AM	#14
Jimbuna Chief of the Boat Join Date: Feb 2006 Location: 250 metres below the surface Posts: 190,473 Downloads: 63 Uploads: 13	Look for any post by JScones...theres always a link on his sig...or use the search for 'SH3 Commander' __________________ Wise men speak because they have something to say; Fools because they have to say something. Oh my God, not again!!