Help please getting old fatique model back

bert8for3 · 08-06-06, 07:11 PM

Had to do a comp reinstall and after reinstalling SH3 and TGW, I don't have the same fatigue model and can't figure out how to get it back.

Before rolling back via SH3Cmdr and installing GW, I had been running Rub, whatever fatigue model I had, it was the one with the efficiency bars on each of the compartments and the crew got fatigued. Had the same with GW and I think I selected 24hr fatigue, but I'm not sure. At any rate, after the reinstall now I have no efficiency bars, the crew get fatigued but it seems to take longer I think, and I get these red exclamation points beside crewmembers. What do I do to get the old system back?

Reece · 08-06-06, 09:22 PM

Hi, the file you need to replace or edit is Basic.cfg found in the following folder:
SilentHunterIII\data\cfg, edit the file replace the following Block with:

[FATIGUE_COEF]
;comp 0
RegularFactor00=0.01
SpecificFactor00=0.04
BadWeather0=0.02
;comp1
RegularFactor10=0.01
RegularFactor11=0.01
SpecificFactor10=0.01
SpecificFactor11=0.02
BadWeather1=0.02
;comp2
RegularFactor20=0.01
RegularFactor21=0.01
SpecificFactor20=0.01
SpecificFactor21=0.02
BadWeather2=0.02
;comp3
RegularFactor30=0.01
RegularFactor31=0.01
SpecificFactor30=0.04
SpecificFactor31=0.01
BadWeather3=0.02
;comp4
RegularFactor40=0.01
RegularFactor41=0.01
SpecificFactor40=0.01
SpecificFactor41=0.04
BadWeather4=0.02
;comp5
RegularFactor50=0.01
RegularFactor51=0.01
SpecificFactor50=0.03
SpecificFactor51=0.04
BadWeather5=0.02
;comp6
SpecificFactor60=-0.1
SpecificFactor61=-0.1
;comp7
SpecificFactor70=-0.1
SpecificFactor71=-0.1
;comp8
RegularFactor80=0.01
RegularFactor81=0.01
SpecificFactor80=0.03
SpecificFactor81=0.04
BadWeather8=0.02
;comp9
RegularFactor90=0.01
SpecificFactor90=0.05
BadWeather9=0.02
;comp10
RegularFactor100=0.01
SpecificFactor100=0.04
BadWeather10=0.02
;comp 11
RegularFactor110=0.01
RegularFactor111=0.01
SpecificFactor110=0.01
SpecificFactor111=0.01
BadWeather11=0.02

Or if you want the crew without fatigue then edit with the following:

[FATIGUE_COEF]
;comp 0
RegularFactor00=0.00
SpecificFactor00=0.00
BadWeather0=0.00
;comp1
RegularFactor10=0.00
RegularFactor11=0.00
SpecificFactor10=0.00
SpecificFactor11=0.00
BadWeather1=0.00
;comp2
RegularFactor20=0.00
RegularFactor21=0.00
SpecificFactor20=0.00
SpecificFactor21=0.00
BadWeather2=0.00
;comp3
RegularFactor30=0.00
RegularFactor31=0.00
SpecificFactor30=0.00
SpecificFactor31=0.00
BadWeather3=0.00
;comp4
RegularFactor40=0.00
RegularFactor41=0.00
SpecificFactor40=0.00
SpecificFactor41=0.00
BadWeather4=0.00
;comp5
RegularFactor50=0.00
RegularFactor51=0.00
SpecificFactor50=0.00
SpecificFactor51=0.00
BadWeather5=0.00
;comp6
SpecificFactor60=-0.1
SpecificFactor61=-0.1
;comp7
SpecificFactor70=-0.1
SpecificFactor71=-0.1
;comp8
RegularFactor80=0.00
RegularFactor81=0.00
SpecificFactor80=0.00
SpecificFactor81=0.00
BadWeather8=0.00
;comp9
RegularFactor90=0.00
SpecificFactor90=0.00
BadWeather9=0.00
;comp10
RegularFactor100=0.00
SpecificFactor100=0.00
BadWeather10=0.00
;comp 11
RegularFactor110=0.00
RegularFactor111=0.00
SpecificFactor110=0.00
SpecificFactor111=0.00
BadWeather11=0.00

Cheers.

bert8for3 · 08-07-06, 08:13 AM

Tks much Reece.

bert8for3 · 08-07-06, 07:53 PM

Now I've gotten myself all confused with the GW fatigue options plus the SH3 Cmdr fatique options, so if anybody can help a bit more would appreciate.

I edited basic.cfg as Reece said to have fatigue, but they didn't do anything maybe because I was mid-patrol. So I figured I'd start over from scratch, reinstalling TGW. I did not select 24-hour fatigue, and then when I started up from SHCmdr (old version ... 2.5??, anyway the one before the latest), I didn't select any of the fatigue options. Opened up new career and had what I wanted, at least having efficiency bars again. But I don't know if I've got the right model I want until I go out on patrol, and would rather try to get it right first. Do I know have the fatique model where the crew will get roughly half-tired or a bit more after about 2 hours of in-game time at1x. That's the one I want. I know it's not perfect, but I was used to it.

zzsteven · 08-08-06, 06:15 PM

Quote:

Originally Posted by bert8for3

Now I've gotten myself all confused with the GW fatigue options plus the SH3 Cmdr fatique options, so if anybody can help a bit more would appreciate.

I edited basic.cfg as Reece said to have fatigue, but they didn't do anything maybe because I was mid-patrol. So I figured I'd start over from scratch, reinstalling TGW. I did not select 24-hour fatigue, and then when I started up from SHCmdr (old version ... 2.5??, anyway the one before the latest), I didn't select any of the fatigue options. Opened up new career and had what I wanted, at least having efficiency bars again. But I don't know if I've got the right model I want until I go out on patrol, and would rather try to get it right first. Do I know have the fatique model where the crew will get roughly half-tired or a bit more after about 2 hours of in-game time at1x. That's the one I want. I know it's not perfect, but I was used to it.

IIRC GW has two fatigue options, the 8 hr and 24 hr models. Commander 2.5 has the 8 hr model as an option, Commander 2.6 has both as options. While it isn't reccomended, you can change fatigue models while in mid-patrol. Just save/exit then open Commander and change the option. If manually editing basic.cfg then don't forget to rollback Commander before editing. Then relaunch.

zz

08-06-06, 07:11 PM	#1
bert8for3 Ace of the Deep Join Date: Dec 2005 Location: Canada Posts: 1,124 Downloads: 110 Uploads: 0	Help please getting old fatique model back Had to do a comp reinstall and after reinstalling SH3 and TGW, I don't have the same fatigue model and can't figure out how to get it back. Before rolling back via SH3Cmdr and installing GW, I had been running Rub, whatever fatigue model I had, it was the one with the efficiency bars on each of the compartments and the crew got fatigued. Had the same with GW and I think I selected 24hr fatigue, but I'm not sure. At any rate, after the reinstall now I have no efficiency bars, the crew get fatigued but it seems to take longer I think, and I get these red exclamation points beside crewmembers. What do I do to get the old system back?

08-06-06, 09:22 PM	#2
Reece CINC Pacific Fleet Join Date: Sep 2003 Location: Down Under Posts: 34,688 Downloads: 171 Uploads: 0	Hi, the file you need to replace or edit is Basic.cfg found in the following folder: SilentHunterIII\data\cfg, edit the file replace the following Block with: [FATIGUE_COEF] ;comp 0 RegularFactor00=0.01 SpecificFactor00=0.04 BadWeather0=0.02 ;comp1 RegularFactor10=0.01 RegularFactor11=0.01 SpecificFactor10=0.01 SpecificFactor11=0.02 BadWeather1=0.02 ;comp2 RegularFactor20=0.01 RegularFactor21=0.01 SpecificFactor20=0.01 SpecificFactor21=0.02 BadWeather2=0.02 ;comp3 RegularFactor30=0.01 RegularFactor31=0.01 SpecificFactor30=0.04 SpecificFactor31=0.01 BadWeather3=0.02 ;comp4 RegularFactor40=0.01 RegularFactor41=0.01 SpecificFactor40=0.01 SpecificFactor41=0.04 BadWeather4=0.02 ;comp5 RegularFactor50=0.01 RegularFactor51=0.01 SpecificFactor50=0.03 SpecificFactor51=0.04 BadWeather5=0.02 ;comp6 SpecificFactor60=-0.1 SpecificFactor61=-0.1 ;comp7 SpecificFactor70=-0.1 SpecificFactor71=-0.1 ;comp8 RegularFactor80=0.01 RegularFactor81=0.01 SpecificFactor80=0.03 SpecificFactor81=0.04 BadWeather8=0.02 ;comp9 RegularFactor90=0.01 SpecificFactor90=0.05 BadWeather9=0.02 ;comp10 RegularFactor100=0.01 SpecificFactor100=0.04 BadWeather10=0.02 ;comp 11 RegularFactor110=0.01 RegularFactor111=0.01 SpecificFactor110=0.01 SpecificFactor111=0.01 BadWeather11=0.02 Or if you want the crew without fatigue then edit with the following: [FATIGUE_COEF] ;comp 0 RegularFactor00=0.00 SpecificFactor00=0.00 BadWeather0=0.00 ;comp1 RegularFactor10=0.00 RegularFactor11=0.00 SpecificFactor10=0.00 SpecificFactor11=0.00 BadWeather1=0.00 ;comp2 RegularFactor20=0.00 RegularFactor21=0.00 SpecificFactor20=0.00 SpecificFactor21=0.00 BadWeather2=0.00 ;comp3 RegularFactor30=0.00 RegularFactor31=0.00 SpecificFactor30=0.00 SpecificFactor31=0.00 BadWeather3=0.00 ;comp4 RegularFactor40=0.00 RegularFactor41=0.00 SpecificFactor40=0.00 SpecificFactor41=0.00 BadWeather4=0.00 ;comp5 RegularFactor50=0.00 RegularFactor51=0.00 SpecificFactor50=0.00 SpecificFactor51=0.00 BadWeather5=0.00 ;comp6 SpecificFactor60=-0.1 SpecificFactor61=-0.1 ;comp7 SpecificFactor70=-0.1 SpecificFactor71=-0.1 ;comp8 RegularFactor80=0.00 RegularFactor81=0.00 SpecificFactor80=0.00 SpecificFactor81=0.00 BadWeather8=0.00 ;comp9 RegularFactor90=0.00 SpecificFactor90=0.00 BadWeather9=0.00 ;comp10 RegularFactor100=0.00 SpecificFactor100=0.00 BadWeather10=0.00 ;comp 11 RegularFactor110=0.00 RegularFactor111=0.00 SpecificFactor110=0.00 SpecificFactor111=0.00 BadWeather11=0.00 Cheers. __________________ *Sub captains go down with their ship!*

08-07-06, 08:13 AM	#3
bert8for3 Ace of the Deep Join Date: Dec 2005 Location: Canada Posts: 1,124 Downloads: 110 Uploads: 0	Tks much Reece.

08-07-06, 07:53 PM	#4
bert8for3 Ace of the Deep Join Date: Dec 2005 Location: Canada Posts: 1,124 Downloads: 110 Uploads: 0	Now I've gotten myself all confused with the GW fatigue options plus the SH3 Cmdr fatique options, so if anybody can help a bit more would appreciate. I edited basic.cfg as Reece said to have fatigue, but they didn't do anything maybe because I was mid-patrol. So I figured I'd start over from scratch, reinstalling TGW. I did not select 24-hour fatigue, and then when I started up from SHCmdr (old version ... 2.5??, anyway the one before the latest), I didn't select any of the fatigue options. Opened up new career and had what I wanted, at least having efficiency bars again. But I don't know if I've got the right model I want until I go out on patrol, and would rather try to get it right first. Do I know have the fatique model where the crew will get roughly half-tired or a bit more after about 2 hours of in-game time at1x. That's the one I want. I know it's not perfect, but I was used to it.