Adding BB sounds to floating objects?

Stewy1 · 05-15-16, 04:20 AM

Hi guys,

I know this has been covered before- I think I actually asked the question (but can't find the answer)

I did this before - by adding Killer Whale BBs sounds to the Killer Whale 'model' - (sounds great on BB!) I'm now not sure how to this again.

I've repainted the 'Red 4' buoy into a yellow ODAS buoy - for some remote Atlantic missions - and got that working!

I then found a great 'buoy bell' sound off the net - and have managed to get it working with the 'ambient' sound - but I can't work out how to hear it on a sub's sonar.

Could you tell me (again) please how to do it? I'm sure it's a basic DWEdit/file naming issue - but I can't crack it.

Cheers guys
Stew

01-31-17, 07:31 AM

I'm not sure but did you add the sound also to The interface .Agg of every platform? They have BB sounds in them, so I think to even hear an object, it's BB sound needs to be inside the platforms interface agg as well. Just a suspicion, never fondled with that.

And share your buoy!

Stewy1 · 03-04-17, 12:52 AM

Thanks for the info mate.

I lost the repainted buoy when I had to do a reinstall of DW - but I'll try and get it in-game again!

Stew

Wildcat · 06-01-17, 06:54 AM

Stewy, let me know if you'd like to collaborate on a sound mod.

I've grown tired of the awful, awful sounds in DW and am planning a huge overhaul. For a game where sound is the most important means of detection, I can't understand why they used such poor quality sound clips and spent so little time making good sounds. Disappointing. Same sounds were present in Fleet Command and Sub Command too.

Anyway, I'll post a thread about my mod a little later. I have changed a fair number of sounds for my personal copy already, but there's a lot more to go before I'd like to release it as a mod.

I intend to overhaul the experience with stuff like BB sounds from ice floes, more biologics, completely renewed surface and sub sounds, new interface switch/button sounds, active sonar pings, etc. A new crew voice set would be nice but probably is not in the cards at the moment.

06-01-17, 07:10 AM

Quote:

Originally Posted by Wildcat

Stewy, let me know if you'd like to collaborate on a sound mod.

I've grown tired of the awful, awful sounds in DW and am planning a huge overhaul. For a game where sound is the most important means of detection, I can't understand why they used such poor quality sound clips and spent so little time making good sounds. Disappointing. Same sounds were present in Fleet Command and Sub Command too.

Anyway, I'll post a thread about my mod a little later. I have changed a fair number of sounds for my personal copy already, but there's a lot more to go before I'd like to release it as a mod.

I intend to overhaul the experience with stuff like BB sounds from ice floes, more biologics, completely renewed surface and sub sounds, new interface switch/button sounds, active sonar pings, etc. A new crew voice set would be nice but probably is not in the cards at the moment.

Is this an open offer, or for Stewy exclusively?

I made my own sound mod as well for an older RA version. Unfortunately I didn't realize that the scsedit tool corrupts the files, adding these annoying cracks, so all my work was... well, destroyed.

I exchanged nearly everything, especially 3D sounds and interface, as well as mechanical stuff like extending wires, masts, periscopes... it's all too loud and cranky in vanilla, I think. But as I said, it's gone.

However, DW won't die for me soon, so I'd be interested in helping - if I can.

Wildcat · 06-01-17, 08:39 AM

I'm definitely open to help from anyone. Especially interested in hearing the sounds you've created so far, as well as knowing your sources for original sounds. Feel free to PM me about that if you like, I think some of that info may be sensitive especially for military platforms.

Would also like input from former sonar guys and just submariners / ASW people in general regarding accuracy of sounds. I'm sure a lot of info is classified but I would like to make the sounds more accurately match up with the narrowband sonar profiles. I think Sonalysts deliberately fudged this aspect of the sim due to "Top Secret" stuff.

There are some things I plan to ask the RA developers to help with as well, as far as I know certain aspects of the sound engine are hard coded but can likely be changed easily with a bit of work on the dll's or exe. I do not want to start on my own exe modding project if RA's team can work with me on this. One dream I have would be 44k stereo sounds, but I am not sure this is possible without original source code to modify the sound engine. In a previous life though, I was able to modify an old flight simulator from the low quality 11 or 22k mono up to 44k stereo. Might be a possibility.

I struggled with popping and clicking too until I realized that wavs which loop perfectly in the editor are truncated in the sim, so they need to be created in a way that the sim loops the wav at the right point. It's been a while since I did loop work but I remember I managed to overcome it. This was critical for the aircraft where the loop sounds were just horrible.

Ideally I'd like to get this sound mod put into the RA base package at some point in the future, and I also intend to make an offer to help the RA team get the USNI and documentation and mission text translated into correct and easy to read English. This is still a bit far off though, there is a lot of work to be done, but a major sound overhaul is loooong overdue in this sim.

05-15-16, 04:20 AM	#1
Stewy1 Girt by Sea Join Date: Mar 2015 Location: Red Route 1 Posts: 391 Downloads: 176 Uploads: 40	Adding BB sounds to floating objects? Hi guys, I know this has been covered before- I think I actually asked the question (but can't find the answer) I did this before - by adding Killer Whale BBs sounds to the Killer Whale 'model' - (sounds great on BB!) I'm now not sure how to this again. I've repainted the 'Red 4' buoy into a yellow ODAS buoy - for some remote Atlantic missions - and got that working! I then found a great 'buoy bell' sound off the net - and have managed to get it working with the 'ambient' sound - but I can't work out how to hear it on a sub's sonar. Could you tell me (again) please how to do it? I'm sure it's a basic DWEdit/file naming issue - but I can't crack it. Cheers guys Stew

01-31-17, 07:31 AM	#2
Nippelspanner Stowaway Posts: n/a Downloads: Uploads:	I'm not sure but did you add the sound also to The interface .Agg of every platform? They have BB sounds in them, so I think to even hear an object, it's BB sound needs to be inside the platforms interface agg as well. Just a suspicion, never fondled with that. And share your buoy!

03-04-17, 12:52 AM	#3
Stewy1 Girt by Sea Join Date: Mar 2015 Location: Red Route 1 Posts: 391 Downloads: 176 Uploads: 40	Thanks for the info mate. I lost the repainted buoy when I had to do a reinstall of DW - but I'll try and get it in-game again! Stew

06-01-17, 06:54 AM	#4
Wildcat Engineer Join Date: Jan 2002 Posts: 215 Downloads: 69 Uploads: 0	Stewy, let me know if you'd like to collaborate on a sound mod. I've grown tired of the awful, awful sounds in DW and am planning a huge overhaul. For a game where sound is the most important means of detection, I can't understand why they used such poor quality sound clips and spent so little time making good sounds. Disappointing. Same sounds were present in Fleet Command and Sub Command too. Anyway, I'll post a thread about my mod a little later. I have changed a fair number of sounds for my personal copy already, but there's a lot more to go before I'd like to release it as a mod. I intend to overhaul the experience with stuff like BB sounds from ice floes, more biologics, completely renewed surface and sub sounds, new interface switch/button sounds, active sonar pings, etc. A new crew voice set would be nice but probably is not in the cards at the moment.

06-01-17, 08:39 AM	#6
Wildcat Engineer Join Date: Jan 2002 Posts: 215 Downloads: 69 Uploads: 0	I'm definitely open to help from anyone. Especially interested in hearing the sounds you've created so far, as well as knowing your sources for original sounds. Feel free to PM me about that if you like, I think some of that info may be sensitive especially for military platforms. Would also like input from former sonar guys and just submariners / ASW people in general regarding accuracy of sounds. I'm sure a lot of info is classified but I would like to make the sounds more accurately match up with the narrowband sonar profiles. I think Sonalysts deliberately fudged this aspect of the sim due to "Top Secret" stuff. There are some things I plan to ask the RA developers to help with as well, as far as I know certain aspects of the sound engine are hard coded but can likely be changed easily with a bit of work on the dll's or exe. I do not want to start on my own exe modding project if RA's team can work with me on this. One dream I have would be 44k stereo sounds, but I am not sure this is possible without original source code to modify the sound engine. In a previous life though, I was able to modify an old flight simulator from the low quality 11 or 22k mono up to 44k stereo. Might be a possibility. I struggled with popping and clicking too until I realized that wavs which loop perfectly in the editor are truncated in the sim, so they need to be created in a way that the sim loops the wav at the right point. It's been a while since I did loop work but I remember I managed to overcome it. This was critical for the aircraft where the loop sounds were just horrible. Ideally I'd like to get this sound mod put into the RA base package at some point in the future, and I also intend to make an offer to help the RA team get the USNI and documentation and mission text translated into correct and easy to read English. This is still a bit far off though, there is a lot of work to be done, but a major sound overhaul is loooong overdue in this sim.