[REL] Periscope Wake Splash for FOTRSU 1.46

Canonicus · 05-26-21, 08:21 AM

I've made additions to the Sensors_Sub_US. dat file found in FOTRSU that make it possible to have a realistic periscope wake with a small water splash effect. This is a purely cosmetic improvement and will not make your periscope any more detectable, either visually or by sensors.
Fully compatible with 1.46 and the latest update from the FOTRSU team.

This work is based on an older mod called "SensorsWakeSplash_PreWar_Midway_Career".

Credit goes to "W_clear" and "The Beast" for the original work on the effects.
I simply made their work compatible for use with FOTRSU

This mod is JSGME ready... or you could manually replace the Sensors_sub_US.dat file found in Library > USSubParts.
Always make a back-up if you wish to go back to the original.

This mod is only compatible with FOTRSU

Hope you enjoy it.
regards,
Canonicus aka "Dave"

Download link...
https://www.subsim.com/radioroom/dow...o=file&id=5883

vickers03 · 05-26-21, 08:56 AM

nice!

fitzcarraldo · 05-26-21, 09:24 AM

Many thanks for the job!

Fitzcarraldo

flaminus · 05-27-21, 03:11 AM

cool

fitzcarraldo · 06-13-21, 11:49 AM

The mod is causing CTDs in my FOTRSU 1.46. I don´t know why. Disabling it, the game works fine.

Regards.

Fitzcarraldo

Kal_Maximus_U669 · 06-13-21, 12:49 PM

Quote:

Originally Posted by fitzcarraldo

The mod is causing CTDs in my FOTRSU 1.46. I don´t know why. Disabling it, the game works fine.

Regards.

Fitzgerald

Hy fitzcarraldo I confirm what you say I do not use it Ctd immediately

Greeting K.M_U669

Canonicus · 06-13-21, 08:11 PM

Sorry to hear about your troubles. I've been using this mod for many months before it was released and had not experienced any problems, so I'm not sure why you would be having CTD's.
The only thing involving FOTRSU 1.46 was a modification to the Sensors_sub_US.dat that added nodes (copied from another mod) that would allow for the generation of the splash effect to become visible in the sim. The Sensors_sub_US.val that is in 1.46, already had the particle generator and the effect particulars set up and ready to go. With the addition of the nodes in the dat file, the effect was now possible.

flaminus · 06-13-21, 11:19 PM

CTD the same, very strange

I quite understand the mechanism this mod made and try to repeat the work on a orignial .dat file, but fail again....with unknown reason.

propbeanie · 06-14-21, 07:29 AM

Look for ID conflicts, where the "splash" is calling something else maybe with the same ID number, or maybe the same name??

flaminus · 06-14-21, 09:41 AM

Quote:

Originally Posted by propbeanie

Look for ID conflicts, where the "splash" is calling something else maybe with the same ID number, or maybe the same name??

The IDs are correct, everything looks fine, very creepy

propbeanie · 06-14-21, 11:42 AM

Looking in the particals.dat & sim?

flaminus · 06-14-21, 07:39 PM

Quote:

Originally Posted by propbeanie

Looking in the particals.dat & sim?

Maybe, I would continue to test.

Jeff-Groves · 06-14-21, 07:53 PM

It's all really simple to solve.

I just don't have the time at the moment.

Mad Mardigan · 06-15-21, 04:02 PM

Quote:

Originally Posted by Canonicus

Sorry to hear about your troubles. I've been using this mod for many months before it was released and had not experienced any problems, so I'm not sure why you would be having CTD's.
The only thing involving FOTRSU 1.46 was a modification to the Sensors_sub_US.dat that added nodes (copied from another mod) that would allow for the generation of the splash effect to become visible in the sim. The Sensors_sub_US.val that is in 1.46, already had the particle generator and the effect particulars set up and ready to go. With the addition of the nodes in the dat file, the effect was now possible.

Ahoy, Canonicus...

Want to say, that I was looking forward to trying out your work with the mod, Canonicus... & don't want it being taken as disparaging your hard work & efforts... but, sadly... I must also report that, I too, had a CTD after including it into My mix.

I shall keep an eye out for any word of this being corrected, as I would love to see its inclusion as a mod to further enhance FotRS.

M. M.

Kal_Maximus_U669 · 06-16-21, 07:08 AM

Yes for my part I am thinking of a problem with parent ID different construction ... but

05-26-21, 08:21 AM	#1
Canonicus XO Join Date: Mar 2007 Location: In your baffles... Posts: 431 Downloads: 623 Uploads: 7	[REL] Periscope Wake Splash for FOTRSU 1.46 I've made additions to the Sensors_Sub_US. dat file found in FOTRSU that make it possible to have a realistic periscope wake with a small water splash effect. This is a purely cosmetic improvement and will not make your periscope any more detectable, either visually or by sensors. Fully compatible with 1.46 and the latest update from the FOTRSU team. This work is based on an older mod called "SensorsWakeSplash_PreWar_Midway_Career". Credit goes to "W_clear" and "The Beast" for the original work on the effects. I simply made their work compatible for use with FOTRSU This mod is JSGME ready... or you could manually replace the Sensors_sub_US.dat file found in Library > USSubParts. Always make a back-up if you wish to go back to the original. This mod is only compatible with FOTRSU Hope you enjoy it. regards, Canonicus aka "Dave" Download link... https://www.subsim.com/radioroom/dow...o=file&id=5883 __________________ [SIGPIC][/SIGPIC] Don't forget the GUPPY's Last edited by Canonicus; 06-20-21 at 10:08 AM.

05-26-21, 09:24 AM	#3
fitzcarraldo Argentinian Skipper Join Date: Jul 2009 Location: Somewhere between Buenos Aires and the Bungo Suido Posts: 5,130 Downloads: 3216 Uploads: 0	Many thanks for the job! Fitzcarraldo __________________ *My subject is War, and the pity of War. The Poetry is in the pity - Wilfred Owen.*

06-13-21, 11:49 AM	#5
fitzcarraldo Argentinian Skipper Join Date: Jul 2009 Location: Somewhere between Buenos Aires and the Bungo Suido Posts: 5,130 Downloads: 3216 Uploads: 0	The mod is causing CTDs in my FOTRSU 1.46. I don´t know why. Disabling it, the game works fine. Regards. Fitzcarraldo __________________ *My subject is War, and the pity of War. The Poetry is in the pity - Wilfred Owen.*

06-13-21, 08:11 PM	#7
Canonicus XO Join Date: Mar 2007 Location: In your baffles... Posts: 431 Downloads: 623 Uploads: 7	Sorry to hear about your troubles. I've been using this mod for many months before it was released and had not experienced any problems, so I'm not sure why you would be having CTD's. The only thing involving FOTRSU 1.46 was a modification to the Sensors_sub_US.dat that added nodes (copied from another mod) that would allow for the generation of the splash effect to become visible in the sim. The Sensors_sub_US.val that is in 1.46, already had the particle generator and the effect particulars set up and ready to go. With the addition of the nodes in the dat file, the effect was now possible. __________________ [SIGPIC][/SIGPIC] Don't forget the GUPPY's

06-14-21, 07:29 AM	#9
propbeanie CTD - it's not just a job Join Date: May 2016 Location: One hour from Music City USA! Posts: 9,749 Downloads: 440 Uploads: 2	Look for ID conflicts, where the "splash" is calling something else maybe with the same ID number, or maybe the same name?? __________________ "...and bollocks to the naysayer/s" - Jimbuna

05-26-21, 08:56 AM	#2
vickers03 Grey Wolf Join Date: May 2007 Location: germany Posts: 970 Downloads: 705 Uploads: 37	nice!

05-27-21, 03:11 AM	#4
flaminus Sparky Join Date: Apr 2012 Posts: 151 Downloads: 502 Uploads: 5	cool

06-13-21, 11:19 PM	#8
flaminus Sparky Join Date: Apr 2012 Posts: 151 Downloads: 502 Uploads: 5	CTD the same, very strange I quite understand the mechanism this mod made and try to repeat the work on a orignial .dat file, but fail again....with unknown reason.

06-14-21, 11:42 AM	#11
propbeanie CTD - it's not just a job Join Date: May 2016 Location: One hour from Music City USA! Posts: 9,749 Downloads: 440 Uploads: 2	Looking in the particals.dat & sim? __________________ "...and bollocks to the naysayer/s" - Jimbuna

06-14-21, 07:53 PM	#13
Jeff-Groves Village Idiot Join Date: Sep 2014 Posts: 5,319 Downloads: 130 Uploads: 0	It's all really simple to solve. I just don't have the time at the moment. __________________ I don't do Stupid. So don't ask.

06-16-21, 07:08 AM	#15
Kal_Maximus_U669 Sea Lord Join Date: Jan 2017 Location: France Nord East Posts: 1,647 Downloads: 816 Uploads: 0	periscope splash.. Yes for my part I am thinking of a problem with parent ID different construction ... but