[WIP] Official GWX Knight's Cross Edition

Kpt. Lehmann · 11-16-22, 10:16 PM

Hi all.

I know I haven't posted an update for over a month.

The whole team has been holding the gas pedal to the floor for many weeks now, and we have been incredibly busy.

HUGE progress has been made, and we are keeping very quiet on purpose.

Remember, we are rebuilding and modernizing it more or less from the ground up after essentially more than a ten year absence.

Looking roughly at the time frame that I have already mentioned, I think that GWX - Knight's Cross edition is slightly ahead of schedule, but we will see how it goes. Some days we see MILES of progress, and others are a fist fight for every square millimeter.

At any rate, production remains in full swing. Just figured I'd let you all know.

Sink'em ALL!

KL

FUBAR295 · 11-16-22, 11:42 PM

Quote:

Originally Posted by Kpt. Lehmann

Hi all.

I know I haven't posted an update for over a month.

The whole team has been holding the gas pedal to the floor for many weeks now, and we have been incredibly busy.

HUGE progress has been made, and we are keeping very quiet on purpose.

Remember, we are rebuilding and modernizing it more or less from the ground up after essentially more than a ten year absence.

Looking roughly at the time frame that I have already mentioned, I think that GWX - Knight's Cross edition is slightly ahead of schedule, but we will see how it goes. Some days we see MILES of progress, and others are a fist fight for every square millimeter.

At any rate, production remains in full swing. Just figured I'd let you all know.

Sink'em ALL!

KL

Thanks for the update.

Look forward to seeing the finished product.

d@rk51d3 · 11-18-22, 09:09 PM

Better get myself a clean install prepped.

Texas Red · 11-20-22, 08:45 AM

Quote:

Originally Posted by Kpt. Lehmann

Hi all.

I know I haven't posted an update for over a month.

The whole team has been holding the gas pedal to the floor for many weeks now, and we have been incredibly busy.

HUGE progress has been made, and we are keeping very quiet on purpose.

Remember, we are rebuilding and modernizing it more or less from the ground up after essentially more than a ten year absence.

Looking roughly at the time frame that I have already mentioned, I think that GWX - Knight's Cross edition is slightly ahead of schedule, but we will see how it goes. Some days we see MILES of progress, and others are a fist fight for every square millimeter.

At any rate, production remains in full swing. Just figured I'd let you all know.

Sink'em ALL!

KL

That's great news, my friend.

nik112 · 12-14-22, 06:19 AM

Quote:

Originally Posted by Kpt. Lehmann

Hi all.

I know I haven't posted an update for over a month.

The whole team has been holding the gas pedal to the floor for many weeks now, and we have been incredibly busy.

HUGE progress has been made, and we are keeping very quiet on purpose.

Remember, we are rebuilding and modernizing it more or less from the ground up after essentially more than a ten year absence.

Looking roughly at the time frame that I have already mentioned, I think that GWX - Knight's Cross edition is slightly ahead of schedule, but we will see how it goes. Some days we see MILES of progress, and others are a fist fight for every square millimeter.

At any rate, production remains in full swing. Just figured I'd let you all know.

Sink'em ALL!

KL

Hi Captain
Any pics of the upcoming project?
cheers

Kpt. Lehmann · 12-23-22, 12:07 AM

Quote:

Originally Posted by nik112

Hi Captain
Any pics of the upcoming project?
cheers

Hi nik112.
We have decided to do something that I am sure will prove to be unpopular.
We are going to run mostly silent.
Not completely silent, but close to it.

I can assure you this though: Work on GWX-KC remains furiously and actively underway.... and I can tell you that the team is HIGHLY motivated to see it through.

The things I have posted before remain true.

Welding goggles are on all of our faces, sparks are showering in ALL directions, and the din of metal against metal is near continuous.

It will be worth the wait.
It will be ready when it is ready.

In the meantime,
Try to have a Merry Christmas and
Sink'em ALL!

nik112 · 12-23-22, 02:37 AM

Quote:

Originally Posted by Kpt. Lehmann

Hi nik112.
We have decided to do something that I am sure will prove to be unpopular.
We are going to run mostly silent.
Not completely silent, but close to it.

I can assure you this though: Work on GWX-KC remains furiously and actively underway.... and I can tell you that the team is HIGHLY motivated to see it through.

The things I have posted before remain true.

Welding goggles are on all of our faces, sparks are showering in ALL directions, and the din of metal against metal is near continuous.

It will be worth the wait.
It will be ready when it is ready.

In the meantime,
Try to have a Merry Christmas and
Sink'em ALL!

Thanks captain for the update
Keep up the good work
Merry Christmas

Doolar · 01-21-23, 03:34 PM

OK, it's been about a month now since the last tid-bit of info and I realize you guys are "run'n silent", as stated, but could you throw us a bone or two. Say maybe, if GWX KC will have totally new GUI or something like that. Thanx Jerry

Mister_M · 01-21-23, 04:06 PM

+1

Or just saying if you've made any progress...

Kpt. Lehmann · 01-22-23, 12:39 AM

Greetings all.

I am lifting the periscope only to assure all who may be interested, that the GWX-KC engines remain at ahead full.

A great deal of work has been completed, but a great deal of work remains ahead of us.

Gentlemen, (and ladies???)

I understand your curiosity.... I imagine that I might have the same feeling if I were standing in your boots.... but 'running silent' means exactly that.

I think that you might rather we build it.... than talk about it.

< Periscope down. >

It will be ready when it is ready.

< Abtauchen! >

11-16-22, 10:16 PM	#1
Kpt. Lehmann GWX Project Director Join Date: Jul 2005 Location: The Republic of Texas Posts: 6,875 Downloads: 115 Uploads: 0	Hi all. I know I haven't posted an update for over a month. The whole team has been holding the gas pedal to the floor for many weeks now, and we have been incredibly busy. HUGE progress has been made, and we are keeping very quiet on purpose. Remember, we are rebuilding and modernizing it more or less from the ground up after essentially more than a ten year absence. Looking roughly at the time frame that I have already mentioned, I think that GWX - Knight's Cross edition is slightly ahead of schedule, but we will see how it goes. Some days we see MILES of progress, and others are a fist fight for every square millimeter. At any rate, production remains in full swing. Just figured I'd let you all know. Sink'em ALL! KL __________________ www.thegreywolves.com All you need is good men. - Heinrich Lehmann-Willenbrock

01-21-23, 03:34 PM	#8
Doolar Expert Shipsinker Join Date: Feb 2007 Location: Baltimore,Md./ CA45 Posts: 805 Downloads: 360 Uploads: 0	Need a GWX Knights Cross fix OK, it's been about a month now since the last tid-bit of info and I realize you guys are "run'n silent", as stated, but could you throw us a bone or two. Say maybe, if GWX KC will have totally new GUI or something like that. Thanx Jerry __________________ ONEALEX 1.53 ARB / NYGM Enhanced "Steel Coffin" v5.7 DGUI / CCom12 DGUI / WAC 5.2 DGUI / Toyotagt86 v2.3 ARB / GWX3 DGUI

01-22-23, 12:39 AM	#10
Kpt. Lehmann GWX Project Director Join Date: Jul 2005 Location: The Republic of Texas Posts: 6,875 Downloads: 115 Uploads: 0	Greetings all. I am lifting the periscope only to assure all who may be interested, that the GWX-KC engines remain at ahead full. A great deal of work has been completed, but a great deal of work remains ahead of us. Gentlemen, (and ladies???) I understand your curiosity.... I imagine that I might have the same feeling if I were standing in your boots.... but 'running silent' means exactly that. I think that you might rather we build it.... than talk about it. < Periscope down. > It will be ready when it is ready. < Abtauchen! > __________________ www.thegreywolves.com All you need is good men. - Heinrich Lehmann-Willenbrock

11-18-22, 09:09 PM	#3
d@rk51d3 Sea Lord Join Date: Sep 2006 Location: Adelaide, South Australia Posts: 1,917 Downloads: 193 Uploads: 0	Better get myself a clean install prepped.

01-21-23, 04:06 PM	#9
Mister_M Grey Wolf Join Date: Feb 2021 Posts: 813 Downloads: 27 Uploads: 0	+1 Or just saying if you've made any progress...