Overclocking vid card

Merchant Raider · 08-13-08, 06:12 AM

Hi All
I have a radeon x1300 vid card with 256 mb on my pc, I play Silent Hunter 3 and have just got Silent Hunter 4,my vid card is ok but freezes when a load of things are happen in the game,can you increase the mermory in the card or do you have to overclock and how do yo do it i am not great with this type of thing but can follow instructions

,I know now that i was given a load end vid card but want to got some use before i spend some cash on a better one
Regards
Merchant Raider

danlisa · 08-13-08, 06:45 AM

http://www.techpowerup.com/atitool/

Read up on it and be v.careful.

Merchant Raider · 08-13-08, 08:11 AM

Thanks danlisa
Looks hard for a newbie computer user, i may just wait and get a new card as SH3 is not that hard to play on the card i think the risk outweights the benifit.

Regards
Merchant Raider

danlisa · 08-13-08, 08:26 AM

ATI Tool is actually very easy to use.

It will basically run automatic tests to find the best/safest clock for you card. It will do this by increasing the Core & Memory ranges until it finds graphics artifacts, thus indicating an over-stress of the GFX card.

However, you are right, in most cases the risk outweighs the benefit. However, some GFX cards are extremely overclockable.

If you eventually look to buy a new card, might I suggest this site - http://www.overclockers.co.uk/, where you can get already clocked cards with upto 5yr warranty on some models.

Edit -

Look at the ATI AGP prices. <shock>

AVGWarhawk · 08-13-08, 09:34 AM

You also need to consider the other components. RAM? Does your motherboard create a bottle neck with a slow FSB? For instance, my MB has a 400 FSB. This creates a bottle neck. I did run SH4 with the X1300 512MB. It did ok. The EVGA 7800OC 256 did much better.

Merchant Raider · 08-13-08, 04:10 PM

Hi Guys
DANLISA Had a look at that UK site and seen some good cards at good prices and after what Warhawk said about other parts of the computer i think i will just upgrage to card,thanks for the help guys

Merchant Raider

SUBMAN1 · 08-13-08, 04:14 PM

Its the same test that ATI's CCC (Catalyst Control Center) uses. You do not need a special tool to do this for you.

With the ATI CCC, you can select your GPU and memory frequecies manually, have it test your card automagically (I like that word!), and if your card screws up upon reboot because you set things too high, it will set it back to the defaults so you can try again.

-S

NealT · 08-17-08, 10:00 AM

I tried this out because I only have a FX 5200 card and wanted to play SH4...

Sadly, I cannot get the card up far enough to make SH4 run...

Oh well, will just have to wait until I can afford a new system...

SUBMAN1 · 08-17-08, 11:41 AM

Quote:

Originally Posted by NealT

I tried this out because I only have a FX 5200 card and wanted to play SH4...

Sadly, I cannot get the card up far enough to make SH4 run...

Oh well, will just have to wait until I can afford a new system...

How about just buying a new card? THey are cheap, and its your only reason why you can't play. CPU power is not as important.

-S

08-13-08, 06:12 AM	#1
Merchant Raider Machinist's Mate Join Date: May 2008 Location: Ireland Posts: 126 Downloads: 451 Uploads: 0	Overclocking vid card Hi All I have a radeon x1300 vid card with 256 mb on my pc, I play Silent Hunter 3 and have just got Silent Hunter 4,my vid card is ok but freezes when a load of things are happen in the game,can you increase the mermory in the card or do you have to overclock and how do yo do it i am not great with this type of thing but can follow instructions ,I know now that i was given a load end vid card but want to got some use before i spend some cash on a better one Regards Merchant Raider __________________ I THINK THEREFORE I AM , I THINK ?

08-13-08, 06:45 AM	#2
danlisa Navy Seal Join Date: Oct 2005 Location: Cornwall, UK Posts: 5,499 Downloads: 45 Uploads: 1	http://www.techpowerup.com/atitool/ Read up on it and be v.careful. __________________

08-13-08, 08:11 AM	#3
Merchant Raider Machinist's Mate Join Date: May 2008 Location: Ireland Posts: 126 Downloads: 451 Uploads: 0	Thanks danlisa Looks hard for a newbie computer user, i may just wait and get a new card as SH3 is not that hard to play on the card i think the risk outweights the benifit. Regards Merchant Raider __________________ I THINK THEREFORE I AM , I THINK ?

08-13-08, 08:26 AM	#4
danlisa Navy Seal Join Date: Oct 2005 Location: Cornwall, UK Posts: 5,499 Downloads: 45 Uploads: 1	ATI Tool is actually very easy to use. It will basically run automatic tests to find the best/safest clock for you card. It will do this by increasing the Core & Memory ranges until it finds graphics artifacts, thus indicating an over-stress of the GFX card. However, you are right, in most cases the risk outweighs the benefit. However, some GFX cards are extremely overclockable. If you eventually look to buy a new card, might I suggest this site - http://www.overclockers.co.uk/, where you can get already clocked cards with upto 5yr warranty on some models. Edit - Look at the ATI AGP prices. <shock> __________________

08-13-08, 09:34 AM	#5
AVGWarhawk Lucky Jack Join Date: Jun 2005 Location: In a 1954 Buick. Posts: 28,266 Downloads: 90 Uploads: 0	You also need to consider the other components. RAM? Does your motherboard create a bottle neck with a slow FSB? For instance, my MB has a 400 FSB. This creates a bottle neck. I did run SH4 with the X1300 512MB. It did ok. The EVGA 7800OC 256 did much better. __________________ “You're painfully alive in a drugged and dying culture.” ― Richard Yates, Revolutionary Road

08-13-08, 04:10 PM	#6
Merchant Raider Machinist's Mate Join Date: May 2008 Location: Ireland Posts: 126 Downloads: 451 Uploads: 0	Hi Guys DANLISA Had a look at that UK site and seen some good cards at good prices and after what Warhawk said about other parts of the computer i think i will just upgrage to card,thanks for the help guys Merchant Raider __________________ I THINK THEREFORE I AM , I THINK ?

08-13-08, 04:14 PM	#7
SUBMAN1 Rear Admiral Join Date: Apr 2005 Posts: 11,866 Downloads: 0 Uploads: 0	Its the same test that ATI's CCC (Catalyst Control Center) uses. You do not need a special tool to do this for you. With the ATI CCC, you can select your GPU and memory frequecies manually, have it test your card automagically (I like that word!), and if your card screws up upon reboot because you set things too high, it will set it back to the defaults so you can try again. -S __________________

08-17-08, 10:00 AM	#8
NealT Ace of the Deep Join Date: Sep 2006 Location: 2 Meters Below Jimbuna Posts: 1,060 Downloads: 4 Uploads: 0	I tried this out because I only have a FX 5200 card and wanted to play SH4... Sadly, I cannot get the card up far enough to make SH4 run... Oh well, will just have to wait until I can afford a new system...