Nvidia tweaks to SH3/SH4 - Page 8

Charlie901 · 03-21-08, 04:41 PM

Anyone found a Nvidia setting to eliminate the white dots all over the railing/wires when sub is underwater, at periscope depth?

hcwolf9 · 03-22-08, 12:09 AM

Charlie901 Read my post two above yours... I had your problem my settings fix everything in all these posts for Nvidia cards

check Aniso sample opt. ON (This removes Jaggies and removes the while lines you get around models and waves and rivits etc. If you are running 1920x1080 like me)

Cheers!

Hc Wolf

Charlie901 · 03-22-08, 12:18 AM

Quote:

Originally Posted by hcwolf9

Charlie901 Read my post two above yours... I had your problem my settings fix everything in all these posts for Nvidia cards

check Aniso sample opt. ON (This removes Jaggies and removes the while lines you get around models and waves and rivits etc. If you are running 1920x1080 like me)

Cheers!

Hc Wolf

Tried it but I still got 'em at 1024x768... :hmm:

hcwolf9 · 03-22-08, 06:01 PM

Charlie best if you give us your full Spec's on here, you graphics setings and rig setup. Maybe look at my old post a few above this, copy it and then fill in the bits where your setup is diff.

Are you using Nhancer as well? that is a big help. I am sure we can fix this for you. But I need your full system setup.

HCWOLF

Charlie901 · 03-22-08, 11:25 PM

I'm going to try some older drivers....

Currently using Official 169's

I'm using a 7600gt card

Here are some examples of what I'm referring to:

and...

bracer · 03-23-08, 04:07 PM

Hey mates!
Does anyone know how the multicore support option in nHancer works with SH3/4? I run a quadcore and have tried the option both on and off with no difference ingame!? Which setting is the optimal??
//Bracer

jahlmeen · 03-26-08, 11:58 AM

Tja bracer, SH4 kan bara använda 2 kärnor (tror jag), kanske därför du inte märket någon skillnad

lancerr · 04-01-08, 10:54 PM

Was running my old stock dell drivers for my 7900 GS and was getting lots of lag with the Rubini settings.

Finally upgraded to the latest Forceware drivers and with the recommended settings and it looks absolutely gorgeous.

Take a look. (still not sure why the water appears as bands but the sub is what I was concerned about)

I kept it at the 1680 res because resizing the pictures was introducing artifacts

M. Sarsfield · 04-03-08, 11:19 PM

Is anyone running SLI with this game? If so, how have you changed Rubini's settings to take advatage of it? I'm using two EVGA 7600 GT cards.

Schlendrian · 04-04-08, 04:53 AM

I have the same problem that Charlie901 describes, white lines or dots around every object that is submerged when viewed from above the surface.

Specs:

Core2Duo E8200, 4GB Corsair Twinx4096 C5 Ram (800 MHz), Zotac Geforce 8800GT Amp edition 512 MB Ram, I am using the latest Nvidia Drivers and nHancer setup exactly the way hcwolf9 described a few posts up

Any ideas?

hcwolf9 · 04-04-08, 06:16 AM

HI ALL Read my post a few up from this one. describes all my SLI settings.

Also to get rid of the white lines etc all around the sub and rivits, read my last post I tell you all how to fix it by turning on the Aniso or something. sorry forget what I wrote but read it. All SLI settings and graphics settings explained in my last post.

M. Sarsfield · 04-04-08, 08:18 AM

Quote:

check Anti-Aliasing - Supersampling 8xs

hcwolf9, I saw your post and I think my global settings are configured to what you have, except for the Supersampling. '8xs' was not an option that popped up for me. Maybe I need to see if nHancer has an update. I downloaded my version back in January.

M. Sarsfield · 04-04-08, 10:47 AM

hcwolf9,

I think I remember there being a vertical sync option in the graphics menu of SHIV. Did you disable that option to correspond with nHancer?

col_Kurtz · 04-04-08, 04:40 PM

Quote:

Originally Posted by elite_hunter_sh3

question: anyone know any good ATI video card tweaks???
i have a x1900xt

Yop...

Try this: ATITOOL, but be sure, that is for your x1900, `cause I`m not. Guru3D site http://guru3d.com/, or techPower http://www.techpowerup.com/downloads/Tweaking/ http://downloads.guru3d.com/download.php?det=733. But! important, you should read about it, but I can`t find it at this time.
That soft supported many ATI`s, but I don`t remember well, wich excluded.
I`ve got x1300/1500 and I`m trying right now. This not good card, but I`m going to buy HD3650 by Asus, maybe TOP.

Best regards and good hunting for... ATITOOL

There is Nhancer too for nVidia men

hcwolf9 · 04-04-08, 06:41 PM

M. Sarsfield,

I will go back and look at every setting I have for SH4, my windows, system setup etc and I will post on here. But in all my testing I found it was mostly due to the Aniso setting, but i will confirm for you later today. I will also post a pic or two for you all.

03-22-08, 12:09 AM	#107
hcwolf9 Swabbie Join Date: Mar 2008 Posts: 7 Downloads: 0 Uploads: 0	Nvidia setting to eliminate the white dots all over the railing/wires Charlie901 Read my post two above yours... I had your problem my settings fix everything in all these posts for Nvidia cards check Aniso sample opt. ON (This removes Jaggies and removes the while lines you get around models and waves and rivits etc. If you are running 1920x1080 like me) Cheers! Hc Wolf

03-22-08, 06:01 PM	#109
hcwolf9 Swabbie Join Date: Mar 2008 Posts: 7 Downloads: 0 Uploads: 0	Charlie901 Charlie best if you give us your full Spec's on here, you graphics setings and rig setup. Maybe look at my old post a few above this, copy it and then fill in the bits where your setup is diff. Are you using Nhancer as well? that is a big help. I am sure we can fix this for you. But I need your full system setup. HCWOLF

04-01-08, 10:54 PM	#113
lancerr Loader Join Date: Dec 2004 Posts: 88 Downloads: 21 Uploads: 0	Thanks for all your help. Was running my old stock dell drivers for my 7900 GS and was getting lots of lag with the Rubini settings. Finally upgraded to the latest Forceware drivers and with the recommended settings and it looks absolutely gorgeous. Take a look. (still not sure why the water appears as bands but the sub is what I was concerned about) I kept it at the 1680 res because resizing the pictures was introducing artifacts __________________ Best naval sim of all time - TF 1942

04-03-08, 11:19 PM	#114
M. Sarsfield Ace of the Deep Join Date: Aug 2007 Location: Tulsa, OK Posts: 1,016 Downloads: 0 Uploads: 0	Is anyone running SLI with this game? If so, how have you changed Rubini's settings to take advatage of it? I'm using two EVGA 7600 GT cards. __________________ MJS USS Batfish Volunteer/Reenactor www.ss310.com www.ussbatfish.com Communism killed over 100M people and all that I got was this lousy signature.* *http://www.hawaii.edu/powerkills/COM.ART.HTM

04-04-08, 06:16 AM	#116
hcwolf9 Swabbie Join Date: Mar 2008 Posts: 7 Downloads: 0 Uploads: 0	Running SLI in SH4 and no Artifacts HI ALL Read my post a few up from this one. describes all my SLI settings. Also to get rid of the white lines etc all around the sub and rivits, read my last post I tell you all how to fix it by turning on the Aniso or something. sorry forget what I wrote but read it. All SLI settings and graphics settings explained in my last post.

03-21-08, 04:41 PM	#106
Charlie901 XO Join Date: Apr 2005 Location: Ft. Lauderdale, FL Posts: 413 Downloads: 29 Uploads: 0	Anyone found a Nvidia setting to eliminate the white dots all over the railing/wires when sub is underwater, at periscope depth?

03-22-08, 11:25 PM	#110
Charlie901 XO Join Date: Apr 2005 Location: Ft. Lauderdale, FL Posts: 413 Downloads: 29 Uploads: 0	I'm going to try some older drivers.... Currently using Official 169's I'm using a 7600gt card Here are some examples of what I'm referring to: and...

03-23-08, 04:07 PM	#111
bracer Grey Wolf Join Date: Aug 2007 Location: Sweden Posts: 798 Downloads: 19 Uploads: 0	Hey mates! Does anyone know how the multicore support option in nHancer works with SH3/4? I run a quadcore and have tried the option both on and off with no difference ingame!? Which setting is the optimal?? //Bracer

03-26-08, 11:58 AM	#112
jahlmeen Swabbie Join Date: Mar 2008 Posts: 7 Downloads: 3 Uploads: 0	Tja bracer, SH4 kan bara använda 2 kärnor (tror jag), kanske därför du inte märket någon skillnad

04-04-08, 04:53 AM	#115
Schlendrian Nub Join Date: Jan 2008 Posts: 2 Downloads: 9 Uploads: 0	I have the same problem that Charlie901 describes, white lines or dots around every object that is submerged when viewed from above the surface. Specs: Core2Duo E8200, 4GB Corsair Twinx4096 C5 Ram (800 MHz), Zotac Geforce 8800GT Amp edition 512 MB Ram, I am using the latest Nvidia Drivers and nHancer setup exactly the way hcwolf9 described a few posts up Any ideas?

04-04-08, 10:47 AM	#118
M. Sarsfield Ace of the Deep Join Date: Aug 2007 Location: Tulsa, OK Posts: 1,016 Downloads: 0 Uploads: 0	hcwolf9, I think I remember there being a vertical sync option in the graphics menu of SHIV. Did you disable that option to correspond with nHancer? __________________ MJS USS Batfish Volunteer/Reenactor www.ss310.com www.ussbatfish.com Communism killed over 100M people and all that I got was this lousy signature.* *http://www.hawaii.edu/powerkills/COM.ART.HTM

04-04-08, 06:41 PM	#120
hcwolf9 Swabbie Join Date: Mar 2008 Posts: 7 Downloads: 0 Uploads: 0	SH4 SLI Settings M. Sarsfield, I will go back and look at every setting I have for SH4, my windows, system setup etc and I will post on here. But in all my testing I found it was mostly due to the Aniso setting, but i will confirm for you later today. I will also post a pic or two for you all.