GWX1.03 Tools & Dials!

JCWolf · 03-28-07, 08:57 AM

GWX1.03 Tools & Dials Mod!

Released

Started today the developement of this
new Mod, causes are obviouse the
recent release of the GWX 1.03 Patch
so a Updated version is coming out to fit
this new Patch!

Released
The release is posted at my site's forum:
http://www.freepowerboards.com/jcwolf/index.php

Keep the Obervation crew at the bridge!

Alex · 03-28-07, 09:59 AM

JCWolf · 03-28-07, 01:52 PM

Thanks mate,
It will be released soon around tonights time here in Spain...

Packing it, and uploading it ..

Not much time to go...

mr chris · 03-28-07, 02:32 PM

Great stuff JC a must have mod in my eyes

Klt_KUrtz · 03-28-07, 02:32 PM

Hi JCWolf,
Can I use this with stock version of SHIII?
Or what is closest version that it needs?
Thanks if you can help,
KUrtz

JCWolf · 03-28-07, 03:21 PM

Quote:

Originally Posted by Klt_KUrtz

Hi JCWolf,
Can I use this with stock version of SHIII?
Or what is closest version that it needs?
Thanks if you can help,
KUrtz

I can make you a stock SHIII version but not
possible for today mate...

Tomorrow I'll release a Stock SHIII Version mate....

JCWolf · 03-28-07, 03:46 PM

...About the doble posting...

Released

Klt_KUrtz · 03-28-07, 05:14 PM

Well that is very cool of you, Thanks!
I look forward to tomorrow.

My old system, 4 this September, has a bit of a problem running GWX and the other big mods.
I hope other Kaleun's are running pretty basic to play on-line etc. and so will use this excellent mod.
KUrtz.

JCWolf · 03-29-07, 08:11 PM

Quote:

Originally Posted by Klt_KUrtz

Well that is very cool of you, Thanks!
I look forward to tomorrow.
My old system, 4 this September, has a bit of a problem running GWX and the other big mods.
I hope other Kaleun's are running pretty basic to play on-line etc. and so will use this excellent mod.
KUrtz.

Hi there mate

Go here:
http://www.subsim.com/radioroom/showthread.php?t=109846

Genferret · 04-03-07, 06:19 AM

I enabled this mod via JSGME and once Silent Hunter finishes loading and gets ready to go to the Main Menu screen it CTDs.

The version I was attempting to use was Version 2 of the GWX 1.03 Tools and Dials.

Other mods I have installed:
GWX 1.03
GWX 16km Atmosphere

I run SH3 via SH3 Commander.

I did make sure to do a Rollback before I installed the mod, but it always gets to the end of the loading screen just before the menu and then crashes SHIII.

Any ideas on what part of the mod might be causing this? Once I uninstalled it via JSGME SHIII runs just fine again.

JCWolf · 04-03-07, 06:58 AM

Quote:

Originally Posted by Genferret

I enabled this mod via JSGME and once Silent Hunter finishes loading and gets ready to go to the Main Menu screen it CTDs.

The version I was attempting to use was Version 2 of the GWX 1.03 Tools and Dials.

Other mods I have installed:
GWX 1.03
GWX 16km Atmosphere

I run SH3 via SH3 Commander.

I did make sure to do a Rollback before I installed the mod, but it always gets to the end of the loading screen just before the menu and then crashes SHIII.

Any ideas on what part of the mod might be causing this? Once I uninstalled it via JSGME SHIII runs just fine again.

Hi there mate,
I'm sorry to ear that you're having problems,
but You got to see if you did everything correctly
I'm using this version myself installed over the exact same Mods as yours and its working perfect mate,
maybe its a corrupted download, try redownloading it again,
this can hapen a lot with corropted files...

Genferret · 04-03-07, 07:43 AM

Quote:

Originally Posted by jcwolf

Hi there mate,

I'm sorry to ear that you're having problems,
but You got to see if you did everything correctly
I'm using this version myself installed over the exact same Mods as yours and its working perfect mate,
maybe its a corrupted download, try redownloading it again,
this can hapen a lot with corropted files...

Just tried that. Re-downloaded and then tried again, same thing. Just to make sure I tested it completely I also downloaded Version 1 and tested it, same thing happens with that one too, did another download just to make sure that one was not corrupt either and still crashes at the end of the loading screen.

Very odd.

Genferret · 04-03-07, 07:44 AM

Also, with each version and each download (so first time downloading V2, and second time downloading V2, and then first time and second time downloading V1) I tried starting SHIII by itself and then again through SHIII Commander.

Genferret · 04-03-07, 07:57 AM

I found another mod that does what I was trying yours out for anyhow. I liked the look of the bottom bar better in your mod than stock SHIII. Poor Sailor's "My Favorite Dials Mods w/ IO" did what I was looking for.

I was going to use his for the TDC on scope anyhow since it annoys me switching back and forth between positions so much.

I do thank you for your time and efforts tho.

!S

Genferret

JCWolf · 04-03-07, 12:16 PM

No problem,
Just am surprised that you add any problems since
this was released and add nobody elses had problems here...

I'm almost sure that you done something incorrect or its some kind of Mod that you've got installed...

but glad you have what you whant...

03-28-07, 08:57 AM	#1
JCWolf Admiral Join Date: Jan 2006 Location: Spain , Crossing Gibraltar! Posts: 2,292 Downloads: 202 Uploads: 1	GWX1.03 Tools & Dials!Released... GWX1.03 Tools & Dials Mod! Released Started today the developement of this new Mod, causes are obviouse the recent release of the GWX 1.03 Patch so a Updated version is coming out to fit this new Patch! Released The release is posted at my site's forum: http://www.freepowerboards.com/jcwolf/index.php Keep the Obervation crew at the bridge! __________________ JCWolf Mediafire SHIII Page User name : JCWolf Password : stefre@jcm Last edited by JCWolf; 04-28-07 at 02:11 PM.

03-28-07, 09:59 AM	#2
Alex Dominant Wolf Join Date: Nov 2006 Posts: 2,143 Downloads: 30 Uploads: 0	__________________

03-28-07, 01:52 PM	#3
JCWolf Admiral Join Date: Jan 2006 Location: Spain , Crossing Gibraltar! Posts: 2,292 Downloads: 202 Uploads: 1	Alex... Thanks mate, It will be released soon around tonights time here in Spain... Packing it, and uploading it .. Not much time to go... __________________ JCWolf Mediafire SHIII Page User name : JCWolf Password : stefre@jcm

03-28-07, 02:32 PM	#4
mr chris Silent Hunter Join Date: Apr 2005 Location: Herefordshire, England Posts: 3,562 Downloads: 216 Uploads: 0	Great stuff JC a must have mod in my eyes __________________

03-28-07, 03:46 PM	#7
JCWolf Admiral Join Date: Jan 2006 Location: Spain , Crossing Gibraltar! Posts: 2,292 Downloads: 202 Uploads: 1	Sorry... ...About the doble posting... Released __________________ JCWolf Mediafire SHIII Page User name : JCWolf Password : stefre@jcm

03-28-07, 02:32 PM	#5
Klt_KUrtz Loader Join Date: Jul 2006 Posts: 84 Downloads: 32 Uploads: 0	Hi JCWolf, Can I use this with stock version of SHIII? Or what is closest version that it needs? Thanks if you can help, KUrtz

03-28-07, 05:14 PM	#8
Klt_KUrtz Loader Join Date: Jul 2006 Posts: 84 Downloads: 32 Uploads: 0	Well that is very cool of you, Thanks! I look forward to tomorrow. My old system, 4 this September, has a bit of a problem running GWX and the other big mods. I hope other Kaleun's are running pretty basic to play on-line etc. and so will use this excellent mod. KUrtz.

04-03-07, 06:19 AM	#10
Genferret Loader Join Date: Mar 2007 Posts: 85 Downloads: 41 Uploads: 0	I enabled this mod via JSGME and once Silent Hunter finishes loading and gets ready to go to the Main Menu screen it CTDs. The version I was attempting to use was Version 2 of the GWX 1.03 Tools and Dials. Other mods I have installed: GWX 1.03 GWX 16km Atmosphere I run SH3 via SH3 Commander. I did make sure to do a Rollback before I installed the mod, but it always gets to the end of the loading screen just before the menu and then crashes SHIII. Any ideas on what part of the mod might be causing this? Once I uninstalled it via JSGME SHIII runs just fine again.

04-03-07, 07:44 AM	#13
Genferret Loader Join Date: Mar 2007 Posts: 85 Downloads: 41 Uploads: 0	Also, with each version and each download (so first time downloading V2, and second time downloading V2, and then first time and second time downloading V1) I tried starting SHIII by itself and then again through SHIII Commander.

04-03-07, 07:57 AM	#14
Genferret Loader Join Date: Mar 2007 Posts: 85 Downloads: 41 Uploads: 0	I found another mod that does what I was trying yours out for anyhow. I liked the look of the bottom bar better in your mod than stock SHIII. Poor Sailor's "My Favorite Dials Mods w/ IO" did what I was looking for. I was going to use his for the TDC on scope anyhow since it annoys me switching back and forth between positions so much. I do thank you for your time and efforts tho. !S Genferret

04-03-07, 12:16 PM	#15
JCWolf Admiral Join Date: Jan 2006 Location: Spain , Crossing Gibraltar! Posts: 2,292 Downloads: 202 Uploads: 1	No problem, Just am surprised that you add any problems since this was released and add nobody elses had problems here... I'm almost sure that you done something incorrect or its some kind of Mod that you've got installed... but glad you have what you whant... __________________ JCWolf Mediafire SHIII Page User name : JCWolf Password : stefre@jcm