SUBSIM Radio Room Forums



SUBSIM: The Web's #1 resource for all submarine & naval simulations since 1997

Go Back   SUBSIM Radio Room Forums > Silent Hunter 3 - 4 - 5 > Silent Hunter 4: Wolves of the Pacific
Forget password? Reset here

Reply
 
Thread Tools Display Modes
Old 03-25-07, 02:09 PM   #1
vois2
Engineer
 
Join Date: Apr 2005
Location: Southwestern Ohio
Posts: 213
Downloads: 0
Uploads: 0
Default

Just a follow-up to my earlier post:
I now have been able to coordinate radar with sonar, but can hear anything only when between around 70 feet - 100 feet depth to keel.
__________________

I donate to Subsim because it is one of the best communities on the Interwebs.
Stick around a couple of years, and you will see. You're never far from a friend here.
Sunk at location vois22 [at] gmail . com
vois2 is offline   Reply With Quote
Old 03-25-07, 02:35 PM   #2
AirborneTD
Engineer
 
Join Date: Nov 2004
Location: Pennsylvania, USA
Posts: 204
Downloads: 23
Uploads: 0
Default

Radar is functioning somewhat, but could be a lot better. I should be able to get air or surface contacts specified and updated.

Also, when I turn off radar (as in a friendly port), I still get radar contact updates (that's broke).
__________________
"You know, you might get surrounded." "We're paratroopers, Lieutenant. We're supposed to be surrounded." --Band of Brothers
AirborneTD is offline   Reply With Quote
Old 03-25-07, 03:25 PM   #3
JFL1
Sailor man
 
Join Date: Dec 2006
Location: Montreal (Quebec)
Posts: 44
Downloads: 2
Uploads: 0
Default

I may be a complete idiot, but I cannot get this radar thing to work at all. Although I equip my sub with the radar available while in career mode, nothing seems to work when I go to the appropriate station. No switch is working either and the "Hand" icon always greyed out. Same thing during the (pretty useless) tutorial missions.

I noticed that Neal posted a sticky (with link to pics) stating that radar and sonar are working as advertized. I will then presume that I am doing something wrong.

So, as I see a lot of conflicting assertions on the usual simhead forums regarding this radar feature/bug/non-implementation/user incapacity to use properly, would someone be kind enough to help those of us who are not able to have an operable radar?

Thanks in advance.
JFL1 is offline   Reply With Quote
Old 03-25-07, 03:29 PM   #4
Audie
GMM2(SW)
 
Join Date: Apr 2005
Location: Crown Point, Indiana USA
Posts: 67
Downloads: 22
Uploads: 0
Default

I was able operate the RADAR systems last evening with varying degress of success. The trick was to mess around with the yellow buttons on the tool bar.

Also, the range indicator on the "Sweep" unit seems to be bugged. It intermittently flakes out whilst attempting to change the range...
__________________
Audie is offline   Reply With Quote
Old 03-25-07, 03:31 PM   #5
PeriscopeDepth
Sea Lord
 
Join Date: Jul 2002
Location: Pacific NW
Posts: 1,894
Downloads: 6
Uploads: 0
Default

It is pretty ridiculous that there's no air/surface radar contact differentiation though (which wouldn't be too much of a problem if the SD just picked up air contacts as it should). I'm sure it will eventually be fixed though.

PD
PeriscopeDepth is offline   Reply With Quote
Old 03-25-07, 08:15 PM   #6
vois2
Engineer
 
Join Date: Apr 2005
Location: Southwestern Ohio
Posts: 213
Downloads: 0
Uploads: 0
Default

Quote:
Originally Posted by JFL1
... I cannot get this radar thing to work at all. Although I equip my sub with the radar available while in career mode, nothing seems to work when I go to the appropriate station. No switch is working ... would someone be kind enough to help those of us who are not able to have an operable radar?
Here is how I am able to successfully use radar:
I don't touch a thing.
Like you, I equip it at the beginning of a career. As I understand things, this is not historically accurate on my part in December of 1941. However, I wanted to see how it worked and also desired to coordinate it with sonar contacting.
Like you, I've never been able to get any switch or knob on the radar station to react in any way to my interaction. Same for the yellow buttons for default radar commands.
So, I just leave port and sometime later my radar guy will let me know when contacts appear to him on radar. In the usual manner, these contacts are displayed with ridiculous accuracy, including dead accurate range, and target's heading. I am perhaps more bothered by the fact that I can't actually turn off map updates for targets. I turn it off before career, during port, during sail, before battle, etc. It just never goes away, those map updates. Same for external cam -- I can't get it to stay off.
__________________

I donate to Subsim because it is one of the best communities on the Interwebs.
Stick around a couple of years, and you will see. You're never far from a friend here.
Sunk at location vois22 [at] gmail . com
vois2 is offline   Reply With Quote
Reply


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 07:10 AM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Copyright © 1995- 2025 Subsim®
"Subsim" is a registered trademark, all rights reserved.