LuftWolf and Amizaur's Realism Mod v3.04 NOW AVAILABLE!!! - Page 2

LoBlo · 01-28-07, 12:10 PM

Quote:

Originally Posted by XabbaRus

The new model names are the file names that are in my zip file funnily enough.

The dbase stuff for adding gfx isn't that hard. The dimensions that SCS programmed the models with is about right. If you change the length in the dbase you don't see anything different just the game engine will treat it as longer.

As for mast positions, that isn't an issue for the radars as it just looks for the object oanimate.

with weapons they need setting up which I can do as the positions on my ships might be differet so initially missiles will come out of the wrong places. Thankfully ludger's editor shows where the silo is located on the model and I can move the point to match the actual location as I have modelled it.

I'll download 3.04 tonight, replace the model names and then reupload it. Will take maybe an hour to do.

Can you give us a teaser about which models you added?

sonar732 · 01-28-07, 01:07 PM

Hopefully the new SSGN since he mentions silo.

XabbaRus · 01-28-07, 03:21 PM

No new Ohio as it was doing funny things the last time I added it.

Edit fixed the problem where the Ohio model was crashing DWEDIT 3d viewer and resetting my machine.

So if I get the basic paint job done I'll upload an update for Luft.

LuftWolf · 01-28-07, 08:07 PM

I had some stuff to do today, but I'm going to work on it overnight... so expect 3.05 by tomorrow morning EST.

Cheers,
David

LuftWolf · 01-28-07, 08:48 PM

I've received the graphics update for LWAMI.

LWAMI 3.05 will be released with the following models courtesy of members from the X-Team:

-Typhoon
-Foxtrot
-Oscar II
-Delta IV
-Collins
-TR 1700
-206/9
-Han
-688
-Victor III
-Trafalgar
-Agosta
-Daphne
-Xia

Enjoy, I'll have it out tomorrow morning.

Cheers,
David

PS Xabba, be sure to send me the attributions for these models, I don't want anyone to write me any nasty letters.

LuftWolf · 01-29-07, 12:06 AM

Ok, I've finished LWAMI 3.041, which includes the new models from Xabba, all the mast and launcher position corrections for the FFG and 688i.

I have also swapped the positions of the Nixie and the TA on the FFG7 OHP and carried over into LWAMI the stronger dipping sonar cable from 1.04 stock as well as the new model for the dipping unit.

Now I need to decide what else to throw in, since I have some time and I'll be ready to send the file off to Bill (it is too big to host at the CADC this time because of the new models).

Cheers,
David

Mau · 01-29-07, 05:07 AM

Swaping of the Nixie and towed array!!!!!!!

Luftwolf you are the best!

Thanks

LuftWolf · 01-29-07, 12:03 PM

Ok, 3.05 is going to go up soon, I just have to make the distributions.

Cheers,
David

Bill Nichols · 01-29-07, 12:11 PM

Quote:

Originally Posted by LuftWolf

Ok, I've finished LWAMI 3.041, which includes the new models from Xabba, all the mast and launcher position corrections for the FFG and 688i.

I have also swapped the positions of the Nixie and the TA on the FFG7 OHP and carried over into LWAMI the stronger dipping sonar cable from 1.04 stock as well as the new model for the dipping unit.

Now I need to decide what else to throw in, since I have some time and I'll be ready to send the file off to Bill (it is too big to host at the CADC this time because of the new models).

Cheers,
David

I have gobs of space

LuftWolf · 01-29-07, 01:21 PM

Good thing I read the RSR campaign forum... I have to change the object dimensions for the new FFG and 688i models.

Ok, once I do that I'll do the readme and distributions and send off the file to Bill.

Cheers,
David

OneShot · 01-29-07, 01:43 PM

Might be to big to upload directly into the CADC but then you have the FTP space which should be enough ... or does the new file exceed your quota. If so, let me know and I'll fix that.

Cheers
OS

LoBlo · 01-29-07, 02:09 PM

Quote:

Originally Posted by Bill Nichols

Quote:

Originally Posted by LuftWolf

Ok, I've finished LWAMI 3.041, which includes the new models from Xabba, all the mast and launcher position corrections for the FFG and 688i.

I have also swapped the positions of the Nixie and the TA on the FFG7 OHP and carried over into LWAMI the stronger dipping sonar cable from 1.04 stock as well as the new model for the dipping unit.

Now I need to decide what else to throw in, since I have some time and I'll be ready to send the file off to Bill (it is too big to host at the CADC this time because of the new models).

Cheers,
David

I have gobs of space

All hail SubGuru! The keeper of cool stuff!

(and OneShot too!)

LuftWolf · 01-29-07, 02:16 PM

Quote:

Originally Posted by OneShot

Might be to big to upload directly into the CADC but then you have the FTP space which should be enough ... or does the new file exceed your quota. If so, let me know and I'll fix that.

Cheers
OS

My computer shows the FTP as down... :hmm:

Cheers,
David

Bellman · 01-29-07, 03:06 PM

Getting closer - getting excited !

XabbaRus · 01-29-07, 03:31 PM

Luft once 3.05 is out I'll be updating it with the new Ohio model.

01-28-07, 03:21 PM	#18
XabbaRus Navy Seal Join Date: Sep 2001 Posts: 5,330 Downloads: 5 Uploads: 0	No new Ohio as it was doing funny things the last time I added it. Edit fixed the problem where the Ohio model was crashing DWEDIT 3d viewer and resetting my machine. So if I get the basic paint job done I'll upload an update for Luft. __________________ Last edited by XabbaRus; 01-28-07 at 04:54 PM.

01-28-07, 08:07 PM	#19
LuftWolf Ocean Warrior Join Date: May 2005 Location: Free New York Posts: 3,167 Downloads: 2 Uploads: 0	I had some stuff to do today, but I'm going to work on it overnight... so expect 3.05 by tomorrow morning EST. Cheers, David __________________ LW Last edited by LuftWolf; 01-28-07 at 08:26 PM.

01-28-07, 08:48 PM	#20
LuftWolf Ocean Warrior Join Date: May 2005 Location: Free New York Posts: 3,167 Downloads: 2 Uploads: 0	I've received the graphics update for LWAMI. LWAMI 3.05 will be released with the following models courtesy of members from the X-Team: -Typhoon -Foxtrot -Oscar II -Delta IV -Collins -TR 1700 -206/9 -Han -688 -Victor III -Trafalgar -Agosta -Daphne -Xia Enjoy, I'll have it out tomorrow morning. Cheers, David PS Xabba, be sure to send me the attributions for these models, I don't want anyone to write me any nasty letters. __________________ LW

01-29-07, 12:06 AM	#21
LuftWolf Ocean Warrior Join Date: May 2005 Location: Free New York Posts: 3,167 Downloads: 2 Uploads: 0	Ok, I've finished LWAMI 3.041, which includes the new models from Xabba, all the mast and launcher position corrections for the FFG and 688i. I have also swapped the positions of the Nixie and the TA on the FFG7 OHP and carried over into LWAMI the stronger dipping sonar cable from 1.04 stock as well as the new model for the dipping unit. Now I need to decide what else to throw in, since I have some time and I'll be ready to send the file off to Bill (it is too big to host at the CADC this time because of the new models). Cheers, David __________________ LW

01-29-07, 12:03 PM	#23
LuftWolf Ocean Warrior Join Date: May 2005 Location: Free New York Posts: 3,167 Downloads: 2 Uploads: 0	Ok, 3.05 is going to go up soon, I just have to make the distributions. Cheers, David __________________ LW

01-28-07, 01:07 PM	#17
sonar732 The Old Man Join Date: Jul 2003 Location: Central MO Posts: 1,562 Downloads: 6 Uploads: 0	Hopefully the new SSGN since he mentions silo.

01-29-07, 05:07 AM	#22
Mau Sonar Guy Join Date: Jun 2005 Posts: 382 Downloads: 3 Uploads: 0	Swaping of the Nixie and towed array!!!!!!! Luftwolf you are the best! Thanks

01-29-07, 01:21 PM	#25
LuftWolf Ocean Warrior Join Date: May 2005 Location: Free New York Posts: 3,167 Downloads: 2 Uploads: 0	Good thing I read the RSR campaign forum... I have to change the object dimensions for the new FFG and 688i models. Ok, once I do that I'll do the readme and distributions and send off the file to Bill. Cheers, David __________________ LW

01-29-07, 01:43 PM	#26
OneShot Grey Wolf Join Date: Mar 2005 Location: Germany Posts: 956 Downloads: 9 Uploads: 0	Might be to big to upload directly into the CADC but then you have the FTP space which should be enough ... or does the new file exceed your quota. If so, let me know and I'll fix that. Cheers OS __________________ All the things you always wanted to know about Dangerous Waters but never dared to ask!

01-29-07, 03:06 PM	#29
Bellman Sea Lord Join Date: Feb 2004 Posts: 1,945 Downloads: 220 Uploads: 0	Getting closer - getting excited ! __________________ Liberty, Equality, Fraternity Last edited by Bellman; 01-29-07 at 11:27 PM.

01-29-07, 03:31 PM	#30
XabbaRus Navy Seal Join Date: Sep 2001 Posts: 5,330 Downloads: 5 Uploads: 0	Luft once 3.05 is out I'll be updating it with the new Ohio model. __________________