The Wolves of Steel: Bugs, glitches and issues thread - Page 78

Nicolai · 06-06-24, 01:33 AM

Quote:

Originally Posted by Kintanar

That's exactly what that option "Show sub sighted radio messages" does! You just start the patrol, and the radio start to flood you with messages from friendly submarines sighted, even the docked ones...

Thanks for your reply Kintanar.

Are you certain this is intended behaviour? The audio cue that plays is "enemy radio message intercepted", hence my confusion. Also I don't remember this from the last time I had TWOS installed, like 5ish years ago.

poveglia · 06-10-24, 08:57 AM

I have heard mixed answers for this question but is it ok to save/reload game inside patrol area as long as there are no ships/planes sighted, you are not near land, and not near destroyed marks? Or do I have to travel outside of the designated patrol area to save? Or are neither of these safe save places?

More specifically outside of the British Coastal Waters patrol area arc

michaeljcaboose9 · 06-11-24, 07:26 PM

Quote:

Originally Posted by poveglia

I have heard mixed answers for this question but is it ok to save/reload game inside patrol area as long as there are no ships/planes sighted, you are not near land, and not near destroyed marks? Or do I have to travel outside of the designated patrol area to save? Or are neither of these safe save places?

More specifically outside of the British Coastal Waters patrol area arc

I've never had an issue, just remember the patrol timer is reset.

sossenbinder · 06-12-24, 04:20 AM

I need a little help, I am new to the game (btw did not play it since many years) and mods and hoping someone will help me..

Problem1

Stadimeter:
- seems to be bugged. When trying to using it in attack periscope it will not work. Wenn trying it in UZO or the observation periscope, stadimeter works. After once working in UZO or observation periscope, it will work in attack periscope too.

Problem2

When looking in Options Editor and opening the "TheDarkWraithUserOptions.py" there are hotkeys enabled for:
HEADING:
- increasing/decreasing desired heading when heading bar is mouse in (key c and q)

I tested these hotkeys in game, but the keys are not working. Can you help me to get these working?

Aktungbby · 06-12-24, 09:44 AM

sossenbinder!

finally resurfaced after 13 years" "silent running"!

hauangua · 07-01-24, 05:16 AM

Good morning everyone, after a long time with sh3, I went back to sh5 twos, installed with Ubisoft connect, started the game, deactivated connect, replaced.exe, installed twos, everything ok. But when I install the Generic File Patch, and click about 40 times, it only gives me 8 patches instead of 9, the first one tells me it doesn't recognize the exe... does anyone know the solution?
Thank you Commanders

fitzcarraldo · 07-01-24, 10:04 AM

Quote:

Originally Posted by hauangua

Good morning everyone, after a long time with sh3, I went back to sh5 twos, installed with Ubisoft connect, started the game, deactivated connect, replaced.exe, installed twos, everything ok. But when I install the Generic File Patch, and click about 40 times, it only gives me 8 patches instead of 9, the first one tells me it doesn't recognize the exe... does anyone know the solution?
Thank you Commanders

I never replaced any exe. And play with Ubi connect connected, and save the games in the Ubi cloud...What is that exe?

You need to patch to 1.2, maybe.

Regards.

Fitzcarraldo

hauangua · 07-01-24, 11:32 AM

Quote:

Originally Posted by fitzcarraldo

I never replaced any exe. And play with Ubi connect connected, and save the games in the Ubi cloud...What is that exe?

You need to patch to 1.2, maybe.

Regards.

Fitzcarraldo

Hi fitzcarraldo
I read it from the Twos installation instructions:
" If you own Digital/Ubisoft Connect download version of the game, you'll have to perform
manual sh5.exe replacement before you proceed to TWoS installation. Valid v1.2.0 sh5.exe
from DVD version of the game can be found on this link...
http://www.mediafire.com/file/x48vge3whjf4ua5/sh5.zip/file".
I thinked Need this change...

hauangua · 07-08-24, 03:00 AM

Solved, downloaded TWoS
again, probably the first download was corrupt

waldwolf1967 · 08-20-24, 11:51 AM

I checked the GR2 with the >verify< function in the GR2 Editor! However, the file NKC_Moygannon.GR2 was reported to me as a corrupt file! It would be great if this message could be fixed. Not that this might cause the game to crash from time to time. Its original TWOS 2.2.25 File

https://www.directupload.eu/file/d/8...e3xjox_png.htm

shuggiebroon · 08-25-24, 02:07 PM

Hi guys, been years since I've played TWoS. I'm trying to relearn the mechanics with the historical mission tutorials, I've tried RAOB and the Four Bearings missions. I remember there would be a text box that pops up to run you through the tutorial, but now I get nothing.

Running on Steam, restored the snapshot and the patcher has all 9 patches.
Game is up to date and I've also installed the TWoS update.

Any ideas?

I've reinstalled everything from scratch, following all instructions and still no luck.

Any help would be appreciated!

Edit: I'm just dumb, forgot that I needed to also activate the tutorial.

Aktungbby · 08-25-24, 03:23 PM

shuggiebroon!

shuggiebroon · 08-26-24, 06:19 AM

Quote:

Originally Posted by Aktungbby

shuggiebroon!

o7 Sir!

03-18-25, 01:05 PM

1.
Version of the game - 1.2.0
TWoS version - 2.2.25

2.
Confirm that your game is updated to official v1.2.0 version and that the vanilla game works without problems
YES

3.
If you use any non-TWoS custom mods, remove them, reinstall your game/TWoS completely according to install instruction, start new campaign and make sure that the issue still persist!
Fresh installation of the mod

4.
Confirm that the Generic Patcher is correctly activated and the snapshot is successfully restored (Install instructions, step 2) Upload screenshot of opened Generic Patcher window and it's patches (Silent Hunter 5\TDW_GenericPatcher_v_1_0_168_0/GenericPatcher.exe)
https://ibb.co/9Hzcz0pn

5.
Provide a screenshot of your main Silent Hunter 5 installation folder and it's content!
https://ibb.co/Y7pmj0BP
https://ibb.co/JwhQGmrZ

6.
JSGME screenshot!
All OFF. Didn't touch anything

7.
Make sure to provide as much details as possible when describing situation where problem/bug/CTD can be observed. What should we do in order to reproduce this issue?
Fresh installation of the mod

8.
Upload several screenshots and gamesaves on which problem can be observed.
https://ibb.co/6GdxXyg

capcc · 04-14-25, 02:52 PM

this screen，May I ask where the problem lies？

06-10-24, 08:57 AM	#1157
poveglia Seaman Join Date: Nov 2020 Posts: 40 Downloads: 4 Uploads: 0	I have heard mixed answers for this question but is it ok to save/reload game inside patrol area as long as there are no ships/planes sighted, you are not near land, and not near destroyed marks? Or do I have to travel outside of the designated patrol area to save? Or are neither of these safe save places? More specifically outside of the British Coastal Waters patrol area arc Last edited by poveglia; 06-10-24 at 05:47 PM.

06-12-24, 04:20 AM	#1159
sossenbinder Seaman Join Date: Mar 2008 Posts: 34 Downloads: 91 Uploads: 0	I need a little help, I am new to the game (btw did not play it since many years) and mods and hoping someone will help me.. Problem1 Stadimeter: - seems to be bugged. When trying to using it in attack periscope it will not work. Wenn trying it in UZO or the observation periscope, stadimeter works. After once working in UZO or observation periscope, it will work in attack periscope too. Problem2 When looking in Options Editor and opening the "TheDarkWraithUserOptions.py" there are hotkeys enabled for: HEADING: - increasing/decreasing desired heading when heading bar is mouse in (key c and q) I tested these hotkeys in game, but the keys are not working. Can you help me to get these working? Last edited by sossenbinder; 06-14-24 at 05:20 AM.

06-12-24, 09:44 AM	#1160
Aktungbby Gefallen Engel U-666 Join Date: Jul 2013 Location: On a tilted, overheated, overpopulated spinning mudball on Collision course with Andromeda Galaxy Posts: 29,978 Downloads: 24 Uploads: 0	Welcome back! sossenbinder! finally resurfaced after 13 years" "silent running"! __________________ "Only two things are infinite; The Universe and human squirrelyness?!!

07-01-24, 05:16 AM	#1161
hauangua Grey Wolf Join Date: Jul 2011 Location: Verona, Italy Posts: 927 Downloads: 1435 Uploads: 0	Good morning everyone, after a long time with sh3, I went back to sh5 twos, installed with Ubisoft connect, started the game, deactivated connect, replaced.exe, installed twos, everything ok. But when I install the Generic File Patch, and click about 40 times, it only gives me 8 patches instead of 9, the first one tells me it doesn't recognize the exe... does anyone know the solution? Thank you Commanders __________________ Parked under the balcony with my U-27 waiting Juliet finish makeup

07-08-24, 03:00 AM	#1164
hauangua Grey Wolf Join Date: Jul 2011 Location: Verona, Italy Posts: 927 Downloads: 1435 Uploads: 0	Solved, downloaded TWoS again, probably the first download was corrupt __________________ Parked under the balcony with my U-27 waiting Juliet finish makeup Last edited by hauangua; 07-08-24 at 03:52 AM.

08-20-24, 11:51 AM	#1165
waldwolf1967 Watch Join Date: Nov 2005 Posts: 27 Downloads: 74 Uploads: 0	Corrupt File I checked the GR2 with the >verify< function in the GR2 Editor! However, the file NKC_Moygannon.GR2 was reported to me as a corrupt file! It would be great if this message could be fixed. Not that this might cause the game to crash from time to time. Its original TWOS 2.2.25 File https://www.directupload.eu/file/d/8...e3xjox_png.htm

08-25-24, 02:07 PM	#1166
shuggiebroon Swabbie Join Date: Mar 2018 Posts: 7 Downloads: 7 Uploads: 0	Missing tutorial messages Hi guys, been years since I've played TWoS. I'm trying to relearn the mechanics with the historical mission tutorials, I've tried RAOB and the Four Bearings missions. I remember there would be a text box that pops up to run you through the tutorial, but now I get nothing. Running on Steam, restored the snapshot and the patcher has all 9 patches. Game is up to date and I've also installed the TWoS update. Any ideas? I've reinstalled everything from scratch, following all instructions and still no luck. Any help would be appreciated! Edit: I'm just dumb, forgot that I needed to also activate the tutorial. Last edited by shuggiebroon; 08-26-24 at 07:25 AM.

08-25-24, 03:23 PM	#1167
Aktungbby Gefallen Engel U-666 Join Date: Jul 2013 Location: On a tilted, overheated, overpopulated spinning mudball on Collision course with Andromeda Galaxy Posts: 29,978 Downloads: 24 Uploads: 0	Welcome back! shuggiebroon! __________________ "Only two things are infinite; The Universe and human squirrelyness?!!

03-18-25, 01:05 PM	#1169
RelictSNG Stowaway Posts: n/a Downloads: Uploads:	1. Version of the game - 1.2.0 TWoS version - 2.2.25 2. Confirm that your game is updated to official v1.2.0 version and that the vanilla game works without problems YES 3. If you use any non-TWoS custom mods, remove them, reinstall your game/TWoS completely according to install instruction, start new campaign and make sure that the issue still persist! Fresh installation of the mod 4. Confirm that the Generic Patcher is correctly activated and the snapshot is successfully restored (Install instructions, step 2) Upload screenshot of opened Generic Patcher window and it's patches (Silent Hunter 5\TDW_GenericPatcher_v_1_0_168_0/GenericPatcher.exe) https://ibb.co/9Hzcz0pn 5. Provide a screenshot of your main Silent Hunter 5 installation folder and it's content! https://ibb.co/Y7pmj0BP https://ibb.co/JwhQGmrZ 6. JSGME screenshot! All OFF. Didn't touch anything 7. Make sure to provide as much details as possible when describing situation where problem/bug/CTD can be observed. What should we do in order to reproduce this issue? Fresh installation of the mod 8. Upload several screenshots and gamesaves on which problem can be observed. https://ibb.co/6GdxXyg

04-14-25, 02:52 PM	#1170
capcc Swabbie Join Date: Jul 2020 Posts: 9 Downloads: 360 Uploads: 0	this screen，May I ask where the problem lies？ this screen，May I ask where the problem lies？