problem with manual TDC in FOTRSU

[razark]

Originally Posted by GWB

The range was roughly 2500-3000 yards if memory serves, but it was NOT ticking down as the seconds went on by. Come to think of it, none of the values were updating, including AoB etc, all of which I updated several times, hoping at some point the TDC would "take hold".

I have not used FotRSU, but from the screenshots, it looks like you haven't turned on the Position Keeper.


Click that button next to the Position Keeper and Torpedo Settings labels, and it will light up. Then you should see the TDC values updating.

[1Patriotofmany]

Originally Posted by razark

I have not used FotRSU, but from the screenshots, it looks like you haven't turned on the Position Keeper.


Click that button next to the Position Keeper and Torpedo Settings labels, and it will light up. Then you should see the TDC values updating.

I don't use manual but I'm going to bet you nailed it on the head.

[KaleunMarco]

Originally Posted by 1Patriotofmany

I don't use manual but I'm going to bet you nailed it on the head.

you can use the PK with auto-targeting but remember to "un-use" it before you make your final observation and fire. shooting with PK will guarantee a miss.

[boonie]

Originally Posted by KaleunMarco

you can use the PK with auto-targeting but remember to "un-use" it before you make your final observation and fire. shooting with PK will guarantee a miss.

hmm ur pk is unreliable probably coz of the malfunctioning stadimeter with fotrsu...



just did a clean install of fotrs v2 (ge), 2nd patrol, bagged fuso off brunei + 2 big merchant south of davao. all using pk. no torp missed yet lel..


some of the custom made freighter still give wrong range reading when using stadimeter in fotrs v2 though. probably because the scale of the model is bad.

[propbeanie]

Originally Posted by boonie

hmm ur pk is unreliable probably coz of the malfunctioning stadimeter with fotrsu...



just did a clean install of fotrs v2 (ge), 2nd patrol, bagged fuso off brunei + 2 big merchant south of davao. all using pk. no torp missed yet lel..


some of the custom made freighter still give wrong range reading when using stadimeter in fotrs v2 though. probably because the scale of the model is bad.

What are you using to "measure" the ship with to claim the scale of the model is bad?? If you use the RecMan, ALL of the models were painstakingly measured for mast height by DanielCoffey when he did all of the ship sil files, and that data will show in the RecMan. The figures are not very realistic in their accuracy, but people complained about the previous "fog of war" figures that were in the mod. The merchant ships were constantly altered throughout the war to change their appearance, the masts were shortened and lengthened at various times, and the funnels were also often altered, and possible bridge structure changes made, not failing to mention the "dazzle" paint schemes used. We cannot get most of that to happen in a mod. The stadimeter does not 'malfunction' in my install, and I do not have access to your computers to see what you folks have, so I cannot speak to what might be amiss with your installs and activations. You will find discrepancies between different uses of the stadimeter due to screen resolution and how accurate you are at placing the doubled image. Refer to the RecMan for ships that have altered "targeting" locations... Proper identification of the various ships is also quite important.

[boonie]

Originally Posted by propbeanie

What are you using to "measure" the ship with to claim the scale of the model is bad?? If you use the RecMan, ALL of the models were painstakingly measured for mast height by DanielCoffey when he did all of the ship sil files, and that data will show in the RecMan. The figures are not very realistic in their accuracy, but people complained about the previous "fog of war" figures that were in the mod. The merchant ships were constantly altered throughout the war to change their appearance, the masts were shortened and lengthened at various times, and the funnels were also often altered, and possible bridge structure changes made, not failing to mention the "dazzle" paint schemes used. We cannot get most of that to happen in a mod. The stadimeter does not 'malfunction' in my install, and I do not have access to your computers to see what you folks have, so I cannot speak to what might be amiss with your installs and activations. You will find discrepancies between different uses of the stadimeter due to screen resolution and how accurate you are at placing the doubled image. Refer to the RecMan for ships that have altered "targeting" locations... Proper identification of the various ships is also quite important.

i just set the realism to have map update. then go to training mission to do manual tdc, after keying in the data and setting pk on, u can see the accuracy of your data in comparison with the real ship position in the weapons map. in fotrsu it will always come out as the data u keyed in have major flaw in distance, the keyed in data using stadimeter will always show to be much much further than where the real ship is. this error happens to all ship measured throughout the game. and due to this the tdc computer will always give higher speed prediction because the range u put in is much higher.

in fotrsu u almost always have to land the stadimeter like approximately 5-10meter higher above the real ship image in order to get a correct pk info.

oh by the way i am using 1920x1080 resolution. no other mod added.

load up fotrs v1.3 or 2.0 and u will see the stadimeter give a much more accurate range.

[1Patriotofmany]

Originally Posted by KaleunMarco

you can use the PK with auto-targeting but remember to "un-use" it before you make your final observation and fire. shooting with PK will guarantee a miss.

Yeah I found that out also when I shot at another ship without unclicking it and the torps went into the same ship I had already hit. DOOOH. I don't ordinarily use it since the auto works fine without it.

[J0313]

I have no problems using the PK so I don't know what the beef is with it. I also use Easy AOB. Good mod. And even when I don't use Easy AOB the PK works great for me. Than again I don't turn it on until I'm under 2000 yards.

[KaleunMarco]

Originally Posted by J0313

I have no problems using the PK so I don't know what the beef is with it. I also use Easy AOB. Good mod. And even when I don't use Easy AOB the PK works great for me. Than again I don't turn it on until I'm under 2000 yards.

that's great but some use it as a distance-keeper-update when they are ahead of the target, submerged, and waiting. for example, you detect a convoy at 10-12,000 yds and determine its course. you select a target and turn on the PK, submerge and make your approach. the PK keeps you updated on the distance to the target. but one would need to turn off the PK and re-adjust the distance, aob, etc. and then take your shot.

does that help?

[razark]

Originally Posted by KaleunMarco

but one would need to turn off the PK and re-adjust the distance, aob, etc. and then take your shot.

But you can adjust those while the PK is on, and the TDC keeps updating the gyro angle based on the new inputs.


I understand why you might want to turn it off while setting up a new target, but it can be done while keeping it on.

[GWB]

Originally Posted by razark

I have not used FotRSU, but from the screenshots, it looks like you haven't turned on the Position Keeper.


Click that button next to the Position Keeper and Torpedo Settings labels, and it will light up. Then you should see the TDC values updating.

thanks for the suggestion - unfortunately this doesn't fix the issue, it just toggles between torp settings, which toggles the display between tracking and the fish settings (run depth / spread setting).

[boonie]

Originally Posted by GWB

thanks for the suggestion - unfortunately this doesn't fix the issue, it just toggles between torp settings, which toggles the display between tracking and the fish settings (run depth / spread setting).

he means the round thingy beside the up-down slider that switch btwn torp and ship angle settings. once u clicked it, it glows red. in your screenie they are all in grey.. meaning u didnt click it after data input.



once u have input the range+angle on bow + speed settings on the upper right dial. click the round thingy at the lower right side of the upper left corner panel.. that will activate position keeper using the data u put in.

[razark]

Originally Posted by boonie

he means the round thingy beside the up-down slider that switch btwn torp and ship angle settings. once u clicked it, it glows red. in your screenie they are all in grey.. meaning u didnt click it after data input.

Yes: