LIVING SILENT HUNTER 3 - EDITION 2022 » DISCUSSION and SUPPORT - Page 12

blueduck · 11-01-22, 09:43 AM

Quote:

Originally Posted by Archive1

All:
I've begun to return after a nasty immersion in a severe hack of our financial accounts (this computer is clean) and begun to again return to LSH3. But on two sorties I have checked out because suddenly multiple crew members have red exclamation marks attached to them (what exactly does that mean?) and suddenly the weapons officer disappeared. Were in no combat threatening condition, no crash situation, just floating waiting for an oncoming ship to become actionable. And still not noticed - ie, no condition Red.
Any help on just what/why this occurs...twice now?
A

rchive1

Hi Archive1,

the other easy way to get rid of crew fatigue is to start JSGME and activate _LSH3-2022__NoFatigue-NoSleepCrew.

Regards
Blueduck

Archive1 · 11-01-22, 10:39 PM

BlueDuck:
You know as I was drifting off to sleep last night after posting this query I suddenly was aware that although I set Commander to "no crew fatigue" I did not check to see that it was actually "on" or may have been lost somehow in multiple changes.
So, I believe you have settled the question.
Thanks for reminding me...that somehow 'change' creeps into so much of what we do in all sorts of endeavors.
Archive1

Archive1 · 11-03-22, 09:40 PM

All:
On Patrol 7 I used 4 bow torpedoes to good effect ....but...
After 4 hours I still had zero loaded and 2 or 3 in reserve although I surface and remained at zero speed in order to reload.
And when I returned to W'lll'haven I still had zero torps in the forward tubes after several hours of travel. I cancelled the remainder of the patrol since I had no functional bow torpedoes to use.
What did I do wrong or where is the program fault?
More importantly, how do we avoid this?
Archive1

blackswan40 · 11-04-22, 12:54 AM

Hi Archive1 sorry to ask this but were you riging for silent running (z key) or if you were transfering external torpedos you can't do that in rough seas or was your bow torpedo crew fatigued or not enough crew in bow torpedo room put a senior officer in there to speed up that process.
Also did you have malfuctions and sabotage checked in options in commander mod.

jscharpf · 11-04-22, 07:24 PM

Hello, long time no see here.. it's been a while.
I decided to give SH3 another try after being somewhat let down with any other U Boat sim out there..

I've played LSH and LSH2015, loved them both. Now I wanted to install LSH2022 and when I run the installer it gives me a message saying I do not have a valid SH3.exe (not sure of the exact words).
I purchased the game many years ago, before Steam, so it is (I believe) a Ubisoft version. Ran a completely fresh install, put it in the root of the C: drive like I always did in the past (C:\SHIII).
Any ideas? I can't get past this message to try out the new mod!

Jeff

Aktungbby · 11-04-22, 07:34 PM

jscharpf!

Archive1 · 11-04-22, 10:37 PM

Blackswan:
Good points. To answer: Not rough seas - quiet: Surfaced and just sat there for a few hours...nada: Not silent running - no reason, no threats: I usually accept the malfunctions but not sabotage keys in Commander: Crew fatigue - usually I do not accept that. Yes, I know, that would in reality be a problem, but in the simulator you have no Chief of Boat to do the rotations, so I do not accept that in Commander. Officer in the torpedo room - actually have no idea, but will check that in the future.
Thanks for the reply.
Archive1

TBird9595 · 11-05-22, 11:23 AM

Hi blackswan40,
I think I have the same issue that Rhodes had (on page 1 of this thread).
Could you share the solution please?
Many thanks

Quote:

Originally Posted by blackswan40

Hi murat124 I sent Rhodes a link to my SH3 install zipped folder from my media fire site the install worked fine for him but i dont post the link to my SH3 meadia fire download on the forums

Aktungbby · 11-05-22, 11:27 AM

TBird9595!

Archive1 · 11-15-22, 11:10 PM

After several patrols I have been presented with the option to advance the 'Qualifications" of several crew members. However, far too often when I select a crew member I get the message "You must complete a patrol...". But all members of the crew have completed 6/7/8 patrols by this time. Dunno why this comes up.
Any answers?
Archive1

Archive1 · 11-15-22, 11:30 PM

Tonight I logged onto LSH3 2022 via Commander (as before) and the program loaded but then crashed to desktop. I tried it again several times, no joy. Then I went to a direct load from LSH3 2022 and the same thing happened.
What's going on?
I have done nothing different than before.
Am into the middle of patrol 8 for this period (earlier episodes much later) with no problems.
So now what?
Archive1

blackswan40 · 11-16-22, 06:15 AM

Hi Archive1 I have flaged your issue to Blueduck of the LSH2022 Team

propbeanie · 11-16-22, 11:36 AM

Quote:

Originally Posted by Archive1

Tonight I logged onto LSH3 2022 via Commander (as before) and the program loaded but then crashed to desktop. I tried it again several times, no joy. Then I went to a direct load from LSH3 2022 and the same thing happened.
What's going on?
I have done nothing different than before.
Am into the middle of patrol 8 for this period (earlier episodes much later) with no problems.
So now what?
Archive1

Are you on Windows 10 and just had an update? I am and did, and the Win10 Update re-set my "legacy" apps' settings and properties. Check your SH3.exe Properties page for alteration from Win10, or possibly having to change them yourself...

Archive1 · 11-16-22, 06:50 PM

Probeanie:
Hmmm. Will take a look as you suggest. As for Win 10, yeah, have stayed with the usually reliable version until I'm forced to change. And of course Microsoft merely does its thing whenever it wants. So that may be the problem.
Appreciate the reply.

May I ask another question? The "qualifications" - post patrol: I always get a "You must complete a patrol" msg when I attempt a Qual award, even though 7-8 patrols have been completed and all crew members are eligible. Not anything of urgency but seems strange.
Archive1

Archive1 · 11-17-22, 11:35 PM

I cannot find any "SH3.exe" file in any LSH3 folder to be able to evaluate.
Can you direct me to better to find what is needed?
I retried both the Commander and the "straight' LSH3 load and both just disappeared after loading.
This is awful!
Archive1

11-03-22, 09:40 PM	#168
Archive1 Captain Join Date: Jul 2006 Location: Washington State south of Tacoma Posts: 495 Downloads: 26 Uploads: 0	Torpedo reload All: On Patrol 7 I used 4 bow torpedoes to good effect ....but... After 4 hours I still had zero loaded and 2 or 3 in reserve although I surface and remained at zero speed in order to reload. And when I returned to W'lll'haven I still had zero torps in the forward tubes after several hours of travel. I cancelled the remainder of the patrol since I had no functional bow torpedoes to use. What did I do wrong or where is the program fault? More importantly, how do we avoid this? Archive1

11-04-22, 12:54 AM	#169
blackswan40 GWX - KC Crash Test Dummy Join Date: Mar 2008 Location: IN THE STEEL SHARKS VIRTUAL OCEAN Posts: 2,783 Downloads: 612 Uploads: 31	Hi Archive1 sorry to ask this but were you riging for silent running (z key) or if you were transfering external torpedos you can't do that in rough seas or was your bow torpedo crew fatigued or not enough crew in bow torpedo room put a senior officer in there to speed up that process. Also did you have malfuctions and sabotage checked in options in commander mod. __________________ Someone Had to Make the Tea Last edited by blackswan40; 11-04-22 at 01:35 AM.

11-04-22, 07:24 PM	#170
jscharpf Frogman Join Date: Oct 2012 Location: Bucharest, Romania Posts: 296 Downloads: 325 Uploads: 0	Invalid SH3? Hello, long time no see here.. it's been a while. I decided to give SH3 another try after being somewhat let down with any other U Boat sim out there.. I've played LSH and LSH2015, loved them both. Now I wanted to install LSH2022 and when I run the installer it gives me a message saying I do not have a valid SH3.exe (not sure of the exact words). I purchased the game many years ago, before Steam, so it is (I believe) a Ubisoft version. Ran a completely fresh install, put it in the root of the C: drive like I always did in the past (C:\SHIII). Any ideas? I can't get past this message to try out the new mod! Jeff

11-04-22, 07:34 PM	#171
Aktungbby Gefallen Engel U-666 Join Date: Jul 2013 Location: On a tilted, overheated, overpopulated spinning mudball on Collision course with Andromeda Galaxy Posts: 30,033 Downloads: 24 Uploads: 0	welcome back! jscharpf! __________________ "Only two things are infinite; The Universe and human squirrelyness?!!

11-05-22, 11:27 AM	#174
Aktungbby Gefallen Engel U-666 Join Date: Jul 2013 Location: On a tilted, overheated, overpopulated spinning mudball on Collision course with Andromeda Galaxy Posts: 30,033 Downloads: 24 Uploads: 0	Welcome aboard! TBird9595! __________________ "Only two things are infinite; The Universe and human squirrelyness?!!

11-01-22, 10:39 PM	#167
Archive1 Captain Join Date: Jul 2006 Location: Washington State south of Tacoma Posts: 495 Downloads: 26 Uploads: 0	BlueDuck: You know as I was drifting off to sleep last night after posting this query I suddenly was aware that although I set Commander to "no crew fatigue" I did not check to see that it was actually "on" or may have been lost somehow in multiple changes. So, I believe you have settled the question. Thanks for reminding me...that somehow 'change' creeps into so much of what we do in all sorts of endeavors. Archive1

11-04-22, 10:37 PM	#172
Archive1 Captain Join Date: Jul 2006 Location: Washington State south of Tacoma Posts: 495 Downloads: 26 Uploads: 0	Blackswan: Good points. To answer: Not rough seas - quiet: Surfaced and just sat there for a few hours...nada: Not silent running - no reason, no threats: I usually accept the malfunctions but not sabotage keys in Commander: Crew fatigue - usually I do not accept that. Yes, I know, that would in reality be a problem, but in the simulator you have no Chief of Boat to do the rotations, so I do not accept that in Commander. Officer in the torpedo room - actually have no idea, but will check that in the future. Thanks for the reply. Archive1

11-15-22, 11:10 PM	#175
Archive1 Captain Join Date: Jul 2006 Location: Washington State south of Tacoma Posts: 495 Downloads: 26 Uploads: 0	New topic After several patrols I have been presented with the option to advance the 'Qualifications" of several crew members. However, far too often when I select a crew member I get the message "You must complete a patrol...". But all members of the crew have completed 6/7/8 patrols by this time. Dunno why this comes up. Any answers? Archive1

11-15-22, 11:30 PM	#176
Archive1 Captain Join Date: Jul 2006 Location: Washington State south of Tacoma Posts: 495 Downloads: 26 Uploads: 0	Now what? Tonight I logged onto LSH3 2022 via Commander (as before) and the program loaded but then crashed to desktop. I tried it again several times, no joy. Then I went to a direct load from LSH3 2022 and the same thing happened. What's going on? I have done nothing different than before. Am into the middle of patrol 8 for this period (earlier episodes much later) with no problems. So now what? Archive1

11-16-22, 06:15 AM	#177
blackswan40 GWX - KC Crash Test Dummy Join Date: Mar 2008 Location: IN THE STEEL SHARKS VIRTUAL OCEAN Posts: 2,783 Downloads: 612 Uploads: 31	Hi Archive1 I have flaged your issue to Blueduck of the LSH2022 Team __________________ Someone Had to Make the Tea

11-16-22, 06:50 PM	#179
Archive1 Captain Join Date: Jul 2006 Location: Washington State south of Tacoma Posts: 495 Downloads: 26 Uploads: 0	Probeanie: Hmmm. Will take a look as you suggest. As for Win 10, yeah, have stayed with the usually reliable version until I'm forced to change. And of course Microsoft merely does its thing whenever it wants. So that may be the problem. Appreciate the reply. May I ask another question? The "qualifications" - post patrol: I always get a "You must complete a patrol" msg when I attempt a Qual award, even though 7-8 patrols have been completed and all crew members are eligible. Not anything of urgency but seems strange. Archive1

11-17-22, 11:35 PM	#180
Archive1 Captain Join Date: Jul 2006 Location: Washington State south of Tacoma Posts: 495 Downloads: 26 Uploads: 0	I cannot find any "SH3.exe" file in any LSH3 folder to be able to evaluate. Can you direct me to better to find what is needed? I retried both the Commander and the "straight' LSH3 load and both just disappeared after loading. This is awful! Archive1