[REL] Trigger Maru Overhauled Update BH

[Kal_Maximus_U669]

Originally Posted by Bubblehead1980

No it has not been integrated, both Allied Ship Pack and the TMO ship pack are REQUIRED to use the mod. Install in the order specified in the README.

yes I saw the redame .. that's why I'm asking the question .. I just took them ... I had download link problems ... !!! this is often the case on Subsim either on Chrome or Edge it becomes painful ... it is strange that this often occurs at subsim .. on other forum I do not have these problems well I started to assemble thank you ..

[Kal_Maximus_U669]

I have the following problem have you set up sea life?

It starts well while the assembly is not finished ... !!!
my list mod
[MODS]
TriggerMaru_Overhaul_2-5_UpdateBH Revised Final=1
Nav Map MakeOverTMOUpdate=2
NavMapMakeOverTMOUpdatePatch=3
AlliedShipsTMO=4
ShipsforTMO=5

[Bubblehead1980]

Originally Posted by Kal_Maximus_U669

I have the following problem have you set up sea life?

It starts well while the assembly is not finished ... !!!
my list mod
[MODS]
TriggerMaru_Overhaul_2-5_UpdateBH Revised Final=1
Nav Map MakeOverTMOUpdate=2
NavMapMakeOverTMOUpdatePatch=3
AlliedShipsTMO=4
ShipsforTMO=5

I did add vickers sea life mod. Have not had that issue, let me check again.

[Kal_Maximus_U669]

Originally Posted by Bubblehead1980

I did add vickers sea life mod. Have not had that issue, let me check again.

do not bother it is a graphics problem it is due to the settings I have already had the experience ... otherwise I delete sea life

[Kal_Maximus_U669]

Originally Posted by Kal_Maximus_U669

do not bother it is a graphics problem it is due to the settings I have already had the experience ... otherwise I delete sea life

here it is in order I put the mod back on top ... as you recommended to me ... (via pm)

now resumption of assembly

[Bubblehead1980]

Originally Posted by Kal_Maximus_U669

here it is in order I put the mod back on top ... as you recommended to me ... (via pm)

now resumption of assembly

[propbeanie]

I am not getting a download link for the mod when clicking on the filename on the SubSim Download page, but rather advertisements, and two prompts to allow tracking and something else (agree to terms??), but neither of those two prompts say anything about who they are from. The page does not appear to be displaying properly, and hot links of undesirable destinations on the page move around on the page as I move the mouse cursor, which is not cool at all. I also get a "Allow cookies... and try again" prompt at the bottom of the browser page, which is from Vivaldi. Edge does similar, but without the "cookies" prompt.

[Revus]

Originally Posted by Kal_Maximus_U669

here it is in order I put the mod back on top ... as you recommended to me ... (via pm)

now resumption of assembly

Question, howd you figure this one out? Im having the same issue.

[Kal_Maximus_U669]

Originally Posted by Revus

Question, howd you figure this one out? Im having the same issue.

If you go up the thread of discussions you will have understood that you have to download the mod from Vickers SEA_LIFE_SH4 and reinstall it on it, here you are sir
Reading won't you sleep better believe me

[fitzcarraldo]

Very nice! I´m downloading it now.

Question: Could I use another environment mod? I never (a matter of taste) like the TMO 25 environment, ever looked awful in my installation. In my TMO RSRDC I changed it with Real Enviroment and/or ISE for TMO. But I don´t know if they can ruin your new TMO mod.

Many thanks for all the job and best regards.

Fitzcarraldo

[Bubblehead1980]

Originally Posted by fitzcarraldo

Very nice! I´m downloading it now.

Question: Could I use another environment mod? I never (a matter of taste) like the TMO 25 environment, ever looked awful in my installation. In my TMO RSRDC I changed it with Real Enviroment and/or ISE for TMO. But I don´t know if they can ruin your new TMO mod.

Many thanks for all the job and best regards.

Fitzcarraldo

You can try, however be aware it will alter the designed experience, especially in form of night surface attacks, which are now actually possible due to the darker nights and a major part of the mod. When change the environment it affects sensors and those have to be adjusted, which requires a lot of testing. I probably spent over a month total perfecting the visual sensor settings to get them to work right with the darker nights. Thus far I've encountered no other environmental mod that gets the nights right in this sim.

[Captain Wreckless]

Originally Posted by Kal_Maximus_U669

here it is in order I put the mod back on top ... as you recommended to me ... (via pm)

now resumption of assembly

After a couple of years away I decided to sink ships again.


How was this fixed? I'm getting the white squares also.


This is my install order via JSGME:


TriggerMaru_Overhaul_2-5_UpdateBH Revised Final
NavMapMakeoverTMOUpdate
NavMapmakeoverTMOupdatePatch
Allied Ship Pack TMO
Ships for TMO
EAX Sound Simulation WITHOUT Webster Maneuver_TMO by Vickers03
TMO2_Different_smoke_and_splash_effects by Vickers03
IJN_Radar_Fix_2 (Required)


Thanks.

[Bubblehead1980]

Originally Posted by Captain Wreckless

After a couple of years away I decided to sink ships again.


How was this fixed? I'm getting the white squares also.


This is my install order via JSGME:


TriggerMaru_Overhaul_2-5_UpdateBH Revised Final
NavMapMakeoverTMOUpdate
NavMapmakeoverTMOupdatePatch
Allied Ship Pack TMO
Ships for TMO
EAX Sound Simulation WITHOUT Webster Maneuver_TMO by Vickers03
TMO2_Different_smoke_and_splash_effects by Vickers03
IJN_Radar_Fix_2 (Required)


Thanks.

Welcome back. Hope you enjoy the new and improved TMO. Let me know if have any questions, and let us know what you encounter on patrol. Don't forget to read the README file, as A LOT of changes made and valuable info in there.


Unfortunately, the white squares are caused by a missing texture for the sea life in the mod, somehow they were left out. Due to the process of loading the file (Neal has to do a special thing lol its large file) it is not practical to upload the mod again with the fix at this time. This has been fixed in V2.0 ( which is in testing, almost ready for release) and that is what you see in the screen shot.

A easy fix until next version released is to download vickers03's sea life mod (pacific) and apply it via JSGME. Install the sea life mod last.


G

[MADLOU]

Originally Posted by Kal_Maximus_U669

I have the following problem have you set up sea life?

It starts well while the assembly is not finished ... !!!
my list mod
[MODS]
TriggerMaru_Overhaul_2-5_UpdateBH Revised Final=1
Nav Map MakeOverTMOUpdate=2
NavMapMakeOverTMOUpdatePatch=3
AlliedShipsTMO=4
ShipsforTMO=5

I just started the game with your great update. I am experiencing this same graphical anomaly. It looks like you sent Kal Maximus a fix by PM. Can you let us know what the fix is?

Thanks!

[Arlo]

Originally Posted by MADLOU

I just started the game with your great update. I am experiencing this same graphical anomaly. It looks like you sent Kal Maximus a fix by PM. Can you let us know what the fix is?

Thanks!

https://www.subsim.com/radioroom/dow...o=file&id=5795