The Wolves of Steel: Bugs, glitches and issues thread - Page 61

b00tyclapper · 07-01-21, 06:34 PM

Yes, that exactly was my issue. Also, I have a few more questions. with this mod do we do auto TDC the same way as outlined for the base game? (there is a step by step method outlined on a thread here). As well, are there any tips to help make sure that I don't have to keep reloading my game every time I resume it (reduce chance of campaign advance problem detected, I get it every time and i have to load game up to 5 times or more to resolve it.)

Edit: I am also getting a "camera out of sectors" issue whenever I load into a game. When on the boat I just press f2 and again to fix the view, but when outside the uboat I am unable to fix this, has a fix already been shown in this thread? I'm unable to find it.

les green01 · 07-01-21, 09:15 PM

Quote:

Originally Posted by b00tyclapper

Yes, that exactly was my issue. Also, I have a few more questions. with this mod do we do auto TDC the same way as outlined for the base game? (there is a step by step method outlined on a thread here). As well, are there any tips to help make sure that I don't have to keep reloading my game every time I resume it (reduce chance of campaign advance problem detected, I get it every time and i have to load game up to 5 times or more to resolve it.)

Edit: I am also getting a "camera out of sectors" issue whenever I load into a game. When on the boat I just press f2 and again to fix the view, but when outside the uboat I am unable to fix this, has a fix already been shown in this thread? I'm unable to find it.

for auto put crossairs on target hit space key twice you can also tell weapons officer to lock on target every 72 game hours you want to save and restart the game i don't mess with the verfier until almost the next chapter that way each time i don't have to keep doing the reload for camera out of sectors you can go center of screen bottom to the officers icons click on watch officer then teleport to uzo or something and fix the problem

b00tyclapper · 07-01-21, 09:18 PM

Thanks les,

I wasn't aware that it was only meant for campaign progression. Good to know. I'll be sure to use this thread for further questions, hopefully others who have the same issues can find it here

les green01 · 07-01-21, 10:20 PM

Quote:

Originally Posted by b00tyclapper

Thanks les,

I wasn't aware that it was only meant for campaign progression. Good to know. I'll be sure to use this thread for further questions, hopefully others who have the same issues can find it here

sure hit us with your questions on the last mission it will tell you if you need to verfie it i rather restart 5 times one time instead of every game start up also if you go over to manual targeting you can use the weapons officer to id target lock on it and click on the clock and he can figure out the target speed

Viktor_Prien · 07-04-21, 06:51 PM

2.2.24

I have an issue with the speed dial ( SH3 UI ).
When surfaced everything works fine with the dial indicating the relevant correct speed.
When submerging, instead, soon as the elettric engines starts, the speed dial speed arrow moves to a wrong position. ( The previous one in respect to the speed selected/ordered )
For example if I order ahead standard while submerged, the speed arrow instead moves to the ahead one third position. On ahead slow it moves to the all stop position.
The only one working correctly is the ahead flank position.

Any idea about how to solve/fix the issue? ( I've made several searches but didn't find anything )

Thanks in advance!

Demon777 · 07-05-21, 02:58 AM

Quote:

Originally Posted by Viktor_Prien

2.2.24

I have an issue with the speed dial ( SH3 UI ).
When surfaced everything works fine with the dial indicating the relevant correct speed.
When submerging, instead, soon as the elettric engines starts, the speed dial speed arrow moves to a wrong position. ( The previous one in respect to the speed selected/ordered )
For example if I order ahead standard while submerged, the speed arrow instead moves to the ahead one third position. On ahead slow it moves to the all stop position.
The only one working correctly is the ahead flank position.

Any idea about how to solve/fix the issue? ( I've made several searches but didn't find anything )

Thanks in advance!

I hope this link will help you
https://www.subsim.com/radioroom/showthread.php?t=245236

Viktor_Prien · 07-05-21, 04:26 AM

Quote:

Originally Posted by Demon777

I hope this link will help you
https://www.subsim.com/radioroom/sho...d.php?t=245236

Thanks mate!

Gunny78 · 08-02-21, 04:46 AM

Hello there,
i have installed the latest TWoS version on a clean dvd sh5 installation(updated to 1.2). game crashes always during first mission on my way from Memel to Danzig bay while travelling with time compression on. it always crashes at the same moment in each try. i have installed TWoS many times before without such a problem. i am sure that i have everything installed correctly. anyone expierienced this too? can't find a solution on my own, really could need some help here.

Cyborg322 · 08-02-21, 06:29 AM

Quote:

Originally Posted by Gunny78

Hello there,
i have installed the latest TWoS version on a clean dvd sh5 installation(updated to 1.2). game crashes always during first mission on my way from Memel to Danzig bay while travelling with time compression on. it always crashes at the same moment in each try. i have installed TWoS many times before without such a problem. i am sure that i have everything installed correctly. anyone expierienced this too? can't find a solution on my own, really could need some help here.

have you got the time compression too high ?

Gunny78 · 08-02-21, 08:39 AM

Not higher than 1024. And that was never a problem in the past.

Aktungbby · 08-02-21, 10:24 AM

Gunny78!

...after a three year silent run!

les green01 · 08-02-21, 11:21 AM

Quote:

Originally Posted by Gunny78

Hello there,
i have installed the latest TWoS version on a clean dvd sh5 installation(updated to 1.2). game crashes always during first mission on my way from Memel to Danzig bay while travelling with time compression on. it always crashes at the same moment in each try. i have installed TWoS many times before without such a problem. i am sure that i have everything installed correctly. anyone expierienced this too? can't find a solution on my own, really could need some help here.

have you try running at a lower tc,are you running any other mods maybe start another game see what happens if it does it again same place same time in a new game you might have a curropt file

Gunny78 · 08-02-21, 12:17 PM

I have this mods installed:
TWoS v2.2.24
Bbc extended radio
Das Boot Sound mod

Game crashed with time comp. set to 512 too. Was never a problem in the past. It's the first time having this problem.

used all the mods without causing that problem in the past. Will start a new game after work and see if it still happens.

Cyborg322 · 08-02-21, 12:25 PM

Run without anytime compression if its at the same spot. 1024 is too high if your close to land. It will be easier too see whats happening better and eliminate some possible causes. TC does not always drop to x1 as it should you could be flashing by traffic or even hitting land if your travelling down a canal. Starting a new game may not replicate the same scenario for ages

Gunny78 · 08-02-21, 06:03 PM

ok i tried without tc and it crashed too. started a new game then,same result.
never had problems like that with TWoS before.

07-01-21, 06:34 PM	#901
b00tyclapper Nub Join Date: Jun 2021 Posts: 4 Downloads: 5 Uploads: 0	lol Yes, that exactly was my issue. Also, I have a few more questions. with this mod do we do auto TDC the same way as outlined for the base game? (there is a step by step method outlined on a thread here). As well, are there any tips to help make sure that I don't have to keep reloading my game every time I resume it (reduce chance of campaign advance problem detected, I get it every time and i have to load game up to 5 times or more to resolve it.) Edit: I am also getting a "camera out of sectors" issue whenever I load into a game. When on the boat I just press f2 and again to fix the view, but when outside the uboat I am unable to fix this, has a fix already been shown in this thread? I'm unable to find it.

07-04-21, 06:51 PM	#905
Viktor_Prien Planesman Join Date: Jan 2010 Location: Italy Posts: 196 Downloads: 333 Uploads: 0	2.2.24 I have an issue with the speed dial ( SH3 UI ). When surfaced everything works fine with the dial indicating the relevant correct speed. When submerging, instead, soon as the elettric engines starts, the speed dial speed arrow moves to a wrong position. ( The previous one in respect to the speed selected/ordered ) For example if I order ahead standard while submerged, the speed arrow instead moves to the ahead one third position. On ahead slow it moves to the all stop position. The only one working correctly is the ahead flank position. Any idea about how to solve/fix the issue? ( I've made several searches but didn't find anything ) Thanks in advance! __________________ LEFT-CLICK ON THIS WRITING TO VISIT MY FACEBOOK GROUP!!!

08-02-21, 04:46 AM	#908
Gunny78 Swabbie Join Date: Jun 2018 Location: Germany Posts: 8 Downloads: 22 Uploads: 0	TWoS crashes to desktop during first campaign mission Hello there, i have installed the latest TWoS version on a clean dvd sh5 installation(updated to 1.2). game crashes always during first mission on my way from Memel to Danzig bay while travelling with time compression on. it always crashes at the same moment in each try. i have installed TWoS many times before without such a problem. i am sure that i have everything installed correctly. anyone expierienced this too? can't find a solution on my own, really could need some help here.

08-02-21, 10:24 AM	#911
Aktungbby Gefallen Engel U-666 Join Date: Jul 2013 Location: On a tilted, overheated, overpopulated spinning mudball on Collision course with Andromeda Galaxy Posts: 30,042 Downloads: 24 Uploads: 0	welcome aboard! Gunny78!...after a three year silent run! __________________ "Only two things are infinite; The Universe and human squirrelyness?!!

08-02-21, 12:25 PM	#914
Cyborg322 Scurvy Dog of the Deep Join Date: Dec 2009 Location: Manchester England Posts: 1,125 Downloads: 390 Uploads: 0	Run without anytime compression if its at the same spot. 1024 is too high if your close to land. It will be easier too see whats happening better and eliminate some possible causes. TC does not always drop to x1 as it should you could be flashing by traffic or even hitting land if your travelling down a canal. Starting a new game may not replicate the same scenario for ages __________________

07-01-21, 09:18 PM	#903
b00tyclapper Nub Join Date: Jun 2021 Posts: 4 Downloads: 5 Uploads: 0	Thanks les, I wasn't aware that it was only meant for campaign progression. Good to know. I'll be sure to use this thread for further questions, hopefully others who have the same issues can find it here

08-02-21, 08:39 AM	#910
Gunny78 Swabbie Join Date: Jun 2018 Location: Germany Posts: 8 Downloads: 22 Uploads: 0	Not higher than 1024. And that was never a problem in the past.

08-02-21, 12:17 PM	#913
Gunny78 Swabbie Join Date: Jun 2018 Location: Germany Posts: 8 Downloads: 22 Uploads: 0	I have this mods installed: TWoS v2.2.24 Bbc extended radio Das Boot Sound mod Game crashed with time comp. set to 512 too. Was never a problem in the past. It's the first time having this problem. used all the mods without causing that problem in the past. Will start a new game after work and see if it still happens.

08-02-21, 06:03 PM	#915
Gunny78 Swabbie Join Date: Jun 2018 Location: Germany Posts: 8 Downloads: 22 Uploads: 0	ok i tried without tc and it crashed too. started a new game then,same result. never had problems like that with TWoS before.