[REL] Re: GWR 2020 - Page 23

phooey · 05-14-21, 08:30 AM

Quote:

Originally Posted by Fifi

U415 of Herbert Werner was destroyed by a mine (acoustic) just 100 meters in front of the U-Bunker in Brest...

Yes, but I don't think it's a sea mine. It would make far more serious damage than this.

Anvar1061 · 05-14-21, 02:53 PM

Quote:

Originally Posted by phooey

Hey Anvar1061, I was trying to start new 11th flotilla career at Bergen in January 1943 with type 7c uboat. I believe I have turm 2, fumb-1 and fumo-30 by default. Didn't do anything else, just go straight to patrol. Just 5 seconds after starting the patrol, boom, radar warning receiver destroyed (sometimes it's radar antenna that's destroyed or both), hull integrity goes straight down to 30%, usually one of the uboat compartment is also flooded and damaged but repairable. I hope you can replicate and fix this issue.

I was unable to repeat your problem if you did not change FuMO-30

Anvar1061 · 05-14-21, 03:51 PM

When I make a choice of radar equipment, there is a substitution instead of
FuMO-29

FuMO-30

They change places. How can I fix this?
What does this mean in data/Menu/cfg/menu/equip_2.cfg

phooey · 05-14-21, 07:28 PM

Quote:

Originally Posted by Anvar1061

I was unable to repeat your problem if you did not change FuMO-30

The problem did not repeat too if I don't install GWR addon.

Anvar1061 · 05-15-21, 03:30 AM

Quote:

Originally Posted by phooey

The problem did not repeat too if I don't install GWR addon.

The Addon must be installed as a fix for the detected errors.

dex · 05-15-21, 03:44 PM

Best regards Anvar,please one question...
Addon 21.21 overwrite main patch in Jsgm
Am I right

Anvar1061 · 05-15-21, 03:57 PM

Quote:

Originally Posted by dex

Best regards Anvar,please one question...
Addon 21.21 overwrite main patch in Jsgm
Am I right

Yes. Place the unzipped Addon in the MODS folder and activate with JSGME.

dex · 05-15-21, 04:06 PM

Quote:

Originally Posted by Anvar1061

Yes. Place the unzipped Addon in the MODS folder and activate with JSGME.

Thanks... excusse me one more... I add Dgui 1.4,confirm overwrite and then optional also overwrite,maybe I wrong with optional mod in jsgm

dex · 05-15-21, 04:38 PM

I have this when enable optional mod.... unpacked mods?

Anvar1061 · 05-16-21, 02:42 AM

Quote:

Originally Posted by dex

I have this when enable optional mod.... unpacked mods?

The "MODS" folder must not be inside the MODS folder.
First GWR SH3 v21.2 then Addon GWR SH3 v21.21 and only after that other mods

dex · 05-16-21, 06:45 AM

Quote:

Originally Posted by Anvar1061

The "MODS" folder must not be inside the MODS folder.
First GWR SH3 v21.2 then Addon GWR SH3 v21.21 and only after that other mods

Anvar1061 · 05-16-21, 03:07 PM

Quote:

Originally Posted by dex

I have this when enable optional mod.... unpacked mods?

You set everything up wrong. It must be so!

phooey · 05-16-21, 08:30 PM

Quote:

Originally Posted by Anvar1061

The Addon must be installed as a fix for the detected errors.

Well, I can't install it without screwing my uboat.

airbus29 · 05-17-21, 06:08 AM

Hi
CTD GWR
I don't unterstand the procédure of installation with
GWR 21.1

Anvar1061 · 05-17-21, 10:25 AM

Quote:

Originally Posted by airbus29

Hi
CTD GWR
I don't unterstand the procédure of installation with
GWR 21.1

First, read the documentation, then turn on your brain. Then ask a question.

05-14-21, 03:51 PM	#333
Anvar1061 Ocean Warrior Join Date: May 2012 Location: In the sea, on land and above Posts: 3,486 Downloads: 878 Uploads: 0	When I make a choice of radar equipment, there is a substitution instead of FuMO-29 FuMO-30 They change places. How can I fix this? What does this mean in data/Menu/cfg/menu/equip_2.cfg Nb=5 Pos0 4=167,539,7,7 Mat0 4=data/menu/data/damage/coning.tga Crop0 4=0.601563,0.597656,0.0136719,0.0136719; sectiune pe submarin Pos0 5=265,341,33,42 Mat0 5=data/menu/data/damage/coning.tga Crop0 5=0.00195313,0.859375,0.0644531,0.0820313; la descriere Pos1 4=167,539,7,7 Mat1 4=data/menu/data/damage/coning.tga Crop1 4=0.601563,0.597656,0.0136719,0.0136719; sectiune pe submarin Pos1 5=265,349,46,56 Mat1 5=data/menu/data/damage/coning.tga; la descriere Crop1 5=0.00195313,0.859375,0.0898438,0.109375 Pos2 4=167,539,7,7 Mat2 4=data/menu/data/damage/coning.tga Crop2 4=0.601563,0.597656,0.0136719,0.0136719; sectiune pe submarin Pos2 5=265,349,46,56 Mat2 5=data/menu/data/damage/coning.tga; la descriere Crop2 5=0.00195313,0.859375,0.0898438,0.109375 Pos3 4=167,539,7,7 Mat3 4=data/menu/data/damage/coning.tga Crop3 4=0.601563,0.597656,0.0136719,0.0136719; sectiune pe submarin Pos3 5=265,349,46,56 Mat3 5=data/menu/data/damage/coning.tga; la descriere Crop3 5=0.00195313,0.859375,0.0898438,0.109375 Pos4 4=167,539,7,7 Mat4 4=data/menu/data/damage/coning.tga Crop4 4=0.601563,0.597656,0.0136719,0.0136719; sectiune pe submarin Pos4 5=265,349,46,56 Mat4 5=data/menu/data/damage/coning.tga; la descriere Crop4 5=0.00195313,0.859375,0.0898438,0.109375 __________________ Last edited by Anvar1061; 05-15-21 at 03:54 PM.

05-15-21, 03:44 PM	#336
dex Ensign Join Date: Jan 2014 Location: Serbia Posts: 228 Downloads: 214 Uploads: 0	about installation Best regards Anvar,please one question... Addon 21.21 overwrite main patch in Jsgm Am I right

05-17-21, 06:08 AM	#344
airbus29 Nub Join Date: Mar 2010 Posts: 2 Downloads: 348 Uploads: 0	GWR Hi CTD GWR I don't unterstand the procédure of installation with GWR 21.1