German U-Boats Compilation - Page 27

Aquelarrefox · 05-04-20, 09:42 AM

Quote:

Originally Posted by FUBAR295

John,

GUC does have a sensor.dat file. It is different from the one in NYGM. I changed mine back in November when it the sensor file was talked about around that time frame. I made the changes in NYGM to the sensor.dat file to what NYGM has.

Good hunting,
FUBAR295

Could you post what are the changes?
I have changed it ti add the new vídeo hidro layers and the visual corrections for mep6, I want to try to super hidef on nygm.
The compilation don't have different name as nygm? You shouldn't chafe flotillas cfg?

John Pancoast · 05-04-20, 09:51 AM

Quote:

Originally Posted by Fifi

And my 2 last questions please?

- no

- don't know as I never am static; unrealistic, etc.

FUBAR295 · 05-04-20, 09:52 AM

Quote:

Originally Posted by Aquelarrefox

Could you post what are the changes?
I have changed it ti add the new vídeo hidro layers and the visual corrections for mep6, I want to try to super hidef on nygm.
The compilation don't have different name as nygm? You shouldn't chafe flotillas cfg?

It is an easy fix. Remove GUC from your activated mods. Copy and replace the Sensor.dat file from NYGM to GUC and reinstall the mod.

Fifi · 05-04-20, 10:06 AM

Quote:

Originally Posted by FUBAR295

It is an easy fix. Remove GUC from your activated mods. Copy and replace the Sensor.dat file from NYGM to GUC and reinstall the mod.

Huh...not that easy IMHO.
If doing so, you have to make sure all sensor nodes IDs corresponds!
Maybe they are same, but maybe not...dunno.
Just because they are linked to sensor.Val etc

FUBAR295 · 05-04-20, 10:07 AM

Quote:

Originally Posted by Fifi

Never tried the GUC on top of NYGM...

- Did you encountered any issue? (Other than sensor.dat values)
- Did you had to activate the FixAllSubsGWX?

- Does the U-Boats kept the slowly sinking feature when static, with GUC?

There were some hiccups but with some gentle prodding got it to work okay. There were some things I absolutely hated like that KM pennant and the pirate flag and front and side emblems. They all got ripped out.

No. I am not sure if GWX's FixallsubsGWX was meant for NYGM use.

As far as I can tell the boat still sinks.

That is my experience, no guarantee that it would be the same for you.

Good hunting,
FUBAR295

Fifi · 05-04-20, 10:10 AM

Quote:

Originally Posted by FUBAR295

There were some hiccups but with some gentle prodding got it to work okay. There were some things I absolutely hated like that KM pennant and the pirate flag and front and side emblems. They all got ripped out.

No. I am not sure if GWX's FixallsubsGWX was meant for NYGM use.

As far as I can tell the boat still sinks.

That is my experience, no guarantee that it would be the same for you.

Good hunting,
FUBAR295

Ah, ok thanks

FixAllSubsGWX was for the black textures due to AI subs interaction.
If you don’t activate it for NYGM, and you don’t have any black textures and CTDs, then it’s not necessary...

FUBAR295 · 05-04-20, 10:22 AM

Quote:

Originally Posted by Fifi

Huh...not that easy IMHO.
If doing so, you have to make sure all sensor nodes IDs corresponds!
Maybe they are same, but maybe not...dunno.
Just because they are linked to sensor.Val etc

Thanks for the heads up, but I installed GUC sometime ago and really do not remember any changes I may have made to other files. I do not recall anything amiss though. I'll go back and look and the files.

Good hunting,
FUBAR295

Fifi · 05-04-20, 10:54 AM

I’m preparing for myself a GUC sensor.dat for NYGM as i reinstalled lately this mega mod.
Best is to incorporate it in the FUMO_Fix for GUC (adaption of the FUMO_Fix sensor.dat as we always have to activate it on top of GUC - so it keeps the FUMO fix)

Fifi · 05-04-20, 11:32 AM

Was not that long

Here is the FUMO_Fix for NYGM + GUC: http://www.mediafire.com/file/1uk23b...S_NYGM.7z/file

The sensor.dat is adjusted with NYGM values

(Lot of differences between GUC sensor values and NYGM sensor values!)

Has to be activated on top of German U-Boat Compilation no eagle OR TKSS18 German U-Boat Compilation part 1&2 FOR use with NYGM only.

John Pancoast · 05-04-20, 02:04 PM

So I take it no one has an answer as to why GUBC even has a sensors.dat file in it ?

Levyathan89 · 05-04-20, 02:27 PM

So I've tried to install GUBC (only Type VII B and VII C models by WISE) and it seems to work fine so far, the only problem is that the commands for opening the hatches and lowering the flag (CTRL + F) don't work. How can I edit that?

John Pancoast · 05-04-20, 02:31 PM

Quote:

Originally Posted by Levyathan89

So I've tried to install GUBC (only Type VII B and VII C models by WISE) and it seems to work fine so far, the only problem is that the commands for opening the hatches and lowering the flag (CTRL + F) don't work. How can I edit that?

Be sure to have an officer at the weapons location (hatch), and one at the watch location (flag) otherwise they won't work.

Levyathan89 · 05-04-20, 03:02 PM

Quote:

Originally Posted by John Pancoast

Be sure to have an officer at the weapons location (hatch), and one at the watch location (flag) otherwise they won't work.

The solution was even simpler: changing the mod order in JGSME (I had the GUBC antivated before the GUi, obviously that wouldn't work). D'uh

Fifi · 05-04-20, 03:06 PM

Quote:

Originally Posted by Levyathan89

So I've tried to install GUBC (only Type VII B and VII C models by WISE) and it seems to work fine so far, the only problem is that the commands for opening the hatches and lowering the flag (CTRL + F) don't work. How can I edit that?

Be aware « Type VII B and VII C models by WISE » mod is not finished.
You can play a type VIIB career, but that’s about all (or a type VIIC first turm only)

Aquelarrefox · 05-04-20, 03:12 PM

Quote:

Originally Posted by Fifi

Was not that long

Here is the FUMO_Fix for NYGM + GUC: http://www.mediafire.com/file/1uk23b...S_NYGM.7z/file

The sensor.dat is adjusted with NYGM values

(Lot of differences between GUC sensor values and NYGM sensor values!)

Has to be activated on top of German U-Boat Compilation no eagle OR TKSS18 German U-Boat Compilation part 1&2 FOR use with NYGM only.

I will try it. If it works i will se hydro layers and visual for.mep6

05-04-20, 10:54 AM	#398
Fifi Navy Seal Join Date: Dec 2012 Location: France Posts: 6,109 Downloads: 467 Uploads: 0	I’m preparing for myself a GUC sensor.dat for NYGM as i reinstalled lately this mega mod. Best is to incorporate it in the FUMO_Fix for GUC (adaption of the FUMO_Fix sensor.dat as we always have to activate it on top of GUC - so it keeps the FUMO fix) __________________ https://www.mediafire.com/file/rfw2h...N_V7.8.7z/file

05-04-20, 11:32 AM	#399
Fifi Navy Seal Join Date: Dec 2012 Location: France Posts: 6,109 Downloads: 467 Uploads: 0	Was not that long Here is the FUMO_Fix for NYGM + GUC: http://www.mediafire.com/file/1uk23b...S_NYGM.7z/file The sensor.dat is adjusted with NYGM values (Lot of differences between GUC sensor values and NYGM sensor values!) Has to be activated on top of German U-Boat Compilation no eagle OR TKSS18 German U-Boat Compilation part 1&2 FOR use with NYGM only. __________________ https://www.mediafire.com/file/rfw2h...N_V7.8.7z/file

05-04-20, 02:04 PM	#400
John Pancoast Ocean Warrior Join Date: Apr 2002 Location: Minnysoda Posts: 3,211 Downloads: 501 Uploads: 4	So I take it no one has an answer as to why GUBC even has a sensors.dat file in it ? __________________ "Realistic" is not always GAME-GOOD." - Wave Skipper

05-04-20, 02:27 PM	#401
Levyathan89 Soundman Join Date: Feb 2015 Location: Dresden, Germany Posts: 147 Downloads: 50 Uploads: 0	So I've tried to install GUBC (only Type VII B and VII C models by WISE) and it seems to work fine so far, the only problem is that the commands for opening the hatches and lowering the flag (CTRL + F) don't work. How can I edit that?