Ahnenerbe 1920x1080

Broomwagon · 04-22-19, 07:29 AM

Ok so I've got the Ahnenerbe 1920 x1080 GUI on SHIII and it's really good, I really like it. However, before that I had one of the sub interior mods which allow you to freeroam around the inside of the sub (engine etc) - however the new widescreen GUI is incompatible with it which is a shame - anyone know how I can use both the 1920x1080 GUI and have a sub interior too?

ThePrody · 04-22-19, 08:23 AM

FM_NewInterior v2.1D works fine with Ahnenerbe Widegui mod .

Broomwagon · 04-22-19, 01:32 PM

Yes, I've got that, it doesn't work for me - it just crashes if I enable in whilst Ahnenerbe is enabled.

ThePrody · 04-22-19, 03:35 PM

With NYGM works fine and i think it should work with GWX also, i think i saw others using it . Ahnenerbe should be installed last .

04-27-19, 01:47 PM

Quote:

Originally Posted by Broomwagon

Yes, I've got that, it doesn't work for me - it just crashes if I enable in whilst Ahnenerbe is enabled.

I had the same exact problem some time ago. Fiddling with the mod order might do trick. Sadly I can't remember the exact order or solution.
4GB patch is also highly recommended to make sure the game has enough memory for those rather large mods.

Lannes · 05-04-19, 09:55 AM

Quote:

Originally Posted by Mussalo

I had the same exact problem some time ago. Fiddling with the mod order might do trick. Sadly I can't remember the exact order or solution.
4GB patch is also highly recommended to make sure the game has enough memory for those rather large mods.

This. After returning to SH3 after a long hiatus and having to load everything again, including GWX Gold and Ahnenerbe 1920x1080, the 4GB patch was a must have for everything to run together correctly.

Broomwagon · 05-05-19, 05:37 AM

Thank you Mussalo and Lannes - the 4gb has sorted it, seems its a must for mods.

Aktungbby · 05-05-19, 11:56 AM

Broomwagon!

05-07-19, 02:14 AM

Recently downloaded Ahnenerbe Widegui Final mod and it has d3d9.dll & d3d9 config files but seems to be missing the d3d9.ini file because it will not load.

Where can I find this d3d9.ini file?

THEBERBSTER · 05-07-19, 04:03 AM

Hi vZ
When you unzip the downloaded file the mod folder you are looking at when enabled will put the 2 d3d9 files in your main game folder.
Peter

05-07-19, 10:13 AM

Missing file error previously; I will try again.

05-08-19, 11:12 AM

As promised, I re-installed Ahnenerbe Widegui Final mod with the generic mod enabler to stock SH3, as before. It includes two files, d3d9.dll & d3d9 (a config file apparently). Both files positively installed within the SH3 directory.

Initialize game with SH3 Commander and the resulting error message appeared: "Can not initialize 3D engine"

Removed both d3d9 files, and then removed them individually; and restarted SH3. Game boots up all three ways with the mod but I could tell that the screen was cut off along the top and on the right side making it unplayable. But, the mod did install.

I changed screen ratios with all available ratios (7 of them) on my laptop from 1366 x 768 to 800 x 600 and also changed between "maintain aspect ratio", "scale full screen" & "center image".

Result: Mod does not work on my setup.
Any suggestions?

John Pancoast · 05-08-19, 01:06 PM

Quote:

Originally Posted by von Zelda

As promised, I re-installed Ahnenerbe Widegui Final mod with the generic mod enabler to stock SH3, as before. It includes two files, d3d9.dll & d3d9 (a config file apparently). Both files positively installed within the SH3 directory.

Initialize game with SH3 Commander and the resulting error message appeared: "Can not initialize 3D engine"

Removed both d3d9 files, and then removed them individually; and restarted SH3. Game boots up all three ways with the mod but I could tell that the screen was cut off along the top and on the right side making it unplayable. But, the mod did install.

I changed screen ratios with all available ratios (7 of them) on my laptop from 1366 x 768 to 800 x 600 and also changed between "maintain aspect ratio", "scale full screen" & "center image".

Result: Mod does not work on my setup.
Any suggestions?

Have you applied the 4gb patch to your sh3.exe ? That error message many times means it's needed.

THEBERBSTER · 05-08-19, 01:22 PM

A Warm Welcome To The Subsim Community > Broomwagon
Subsim <> Make A Donation <> See The Benefits <> Support The Community
SH3 – 4 - 5 Tutorials > Downloads > Other Useful Information > See Links in My Signature Below

THEBERBSTER · 05-08-19, 01:34 PM

Hi vZ

Quote:

"Can not initialize 3D engine"

This is a graphics or driver problem.
Make sure your gpu is setup correctly.
Post #7 Changing Nvidia And AMD Radeon GPU Settings > Pictorial

SH3 also needs to be setup correctly.

Installation instructions for Ahnenerbe's mod
Post #42 Changing Any LSH3-2015 Gui To > Ahnenerbe WideGui 1920 x 1080 Final > Download And Instructions > Enable JSGME > Pictorial

You also might need to use this fix.
Post #59 Override High DPI Scaling Behavior Graphic Fix > Pictorial
Peter

04-22-19, 07:29 AM	#1
Broomwagon Nub Join Date: Apr 2019 Posts: 4 Downloads: 9 Uploads: 0	Ahnenerbe 1920x1080 Ok so I've got the Ahnenerbe 1920 x1080 GUI on SHIII and it's really good, I really like it. However, before that I had one of the sub interior mods which allow you to freeroam around the inside of the sub (engine etc) - however the new widescreen GUI is incompatible with it which is a shame - anyone know how I can use both the 1920x1080 GUI and have a sub interior too?

05-05-19, 11:56 AM	#8
Aktungbby Gefallen Engel U-666 Join Date: Jul 2013 Location: On a tilted, overheated, overpopulated spinning mudball on Collision course with Andromeda Galaxy Posts: 30,016 Downloads: 24 Uploads: 0	Welcome aboard! Broomwagon! __________________ "Only two things are infinite; The Universe and human squirrelyness?!!

05-07-19, 02:14 AM	#9
von Zelda Stowaway Posts: n/a Downloads: Uploads:	Ahnenerbe Widegui mod Recently downloaded Ahnenerbe Widegui Final mod and it has d3d9.dll & d3d9 config files but seems to be missing the d3d9.ini file because it will not load. Where can I find this d3d9.ini file?

05-07-19, 04:03 AM	#10
THEBERBSTER Growing Old Disgracefully Join Date: Dec 2012 Location: Hythe - Southampton Posts: 9,609 Downloads: 1133 Uploads: 0	Hi vZ When you unzip the downloaded file the mod folder you are looking at when enabled will put the 2 d3d9 files in your main game folder. Peter __________________ LSH3-2015 <> TUTORIALS <> ALL YOU NEED TO KNOW <> ALL IN ONE PLACE SH4 <> TUTORIALS <> HOW TO DO IT <> INFORMATION <> DOWNLOAD LINKS SH5 <> TUTORIALS <> HOW TO DO IT <> INFORMATION <> DOWNLOAD LINKS Always Here To Help A Fellow 'Subber' \| Need An Answer to A Question Just Send Me A PM

05-08-19, 01:22 PM	#14
THEBERBSTER Growing Old Disgracefully Join Date: Dec 2012 Location: Hythe - Southampton Posts: 9,609 Downloads: 1133 Uploads: 0	A Warm Welcome To The Subsim Community > Broomwagon Subsim <> Make A Donation <> See The Benefits <> Support The Community SH3 – 4 - 5 Tutorials > Downloads > Other Useful Information > See Links in My Signature Below __________________ LSH3-2015 <> TUTORIALS <> ALL YOU NEED TO KNOW <> ALL IN ONE PLACE SH4 <> TUTORIALS <> HOW TO DO IT <> INFORMATION <> DOWNLOAD LINKS SH5 <> TUTORIALS <> HOW TO DO IT <> INFORMATION <> DOWNLOAD LINKS Always Here To Help A Fellow 'Subber' \| Need An Answer to A Question Just Send Me A PM

04-22-19, 08:23 AM	#2
ThePrody not dead yet Join Date: May 2017 Location: Romania Posts: 193 Downloads: 130 Uploads: 1	FM_NewInterior v2.1D works fine with Ahnenerbe Widegui mod .

04-22-19, 01:32 PM	#3
Broomwagon Nub Join Date: Apr 2019 Posts: 4 Downloads: 9 Uploads: 0	Yes, I've got that, it doesn't work for me - it just crashes if I enable in whilst Ahnenerbe is enabled.

04-22-19, 03:35 PM	#4
ThePrody not dead yet Join Date: May 2017 Location: Romania Posts: 193 Downloads: 130 Uploads: 1	With NYGM works fine and i think it should work with GWX also, i think i saw others using it . Ahnenerbe should be installed last .

05-05-19, 05:37 AM	#7
Broomwagon Nub Join Date: Apr 2019 Posts: 4 Downloads: 9 Uploads: 0	Thank you Mussalo and Lannes - the 4gb has sorted it, seems its a must for mods.

05-07-19, 10:13 AM	#11
von Zelda Stowaway Posts: n/a Downloads: Uploads:	Missing file error previously; I will try again.

05-08-19, 11:12 AM	#12
von Zelda Stowaway Posts: n/a Downloads: Uploads:	As promised, I re-installed Ahnenerbe Widegui Final mod with the generic mod enabler to stock SH3, as before. It includes two files, d3d9.dll & d3d9 (a config file apparently). Both files positively installed within the SH3 directory. Initialize game with SH3 Commander and the resulting error message appeared: "Can not initialize 3D engine" Removed both d3d9 files, and then removed them individually; and restarted SH3. Game boots up all three ways with the mod but I could tell that the screen was cut off along the top and on the right side making it unplayable. But, the mod did install. I changed screen ratios with all available ratios (7 of them) on my laptop from 1366 x 768 to 800 x 600 and also changed between "maintain aspect ratio", "scale full screen" & "center image". Result: Mod does not work on my setup. Any suggestions?