LIVING SILENT HUNTER III EDITION 2015 - News & Download - Page 70

THEBERBSTER · 04-02-18, 02:45 AM

Hi TP

Quote:

the uboat spawns somewhere on the West African Coast in stead of Konstanza .

This will only occur if you have Thomsen's Sound Pack mod enabled.
This mod is not compatible with the test mission.
Disable the mod before the test mission.
Enable again afterwards.
or
Remove (or rename / backup) the file en_menu.txt from the Sound Mod's .\data\Menu\ folder.
Peter

ThePrody · 04-02-18, 03:17 AM

Hi
Thanks for the reply . I don't have Thomsen sound pack .
Is there anything i should look for or modify in the en_menu.txt ?
Also, it is not possible to start directly in the 30th flotilla, should i always use the training flotilla start and transfer ?
Thanks

L.E. : i tried it via Training Flotilla and transfer and same result .

However i found the culprit : the LSH Bunker Start mod, it seems something is missing in regards to Konstanza , after i disabled the mod the uboat spawned in Konstanza.

Anvar1061 · 04-02-18, 06:26 AM

Quote:

Originally Posted by ThePrody

Hi
Thanks for the reply . I don't have Thomsen sound pack .
Is there anything i should look for or modify in the en_menu.txt ?
Also, it is not possible to start directly in the 30th flotilla, should i always use the training flotilla start and transfer ?
Thanks

L.E. : i tried it via Training Flotilla and transfer and same result .

However i found the culprit : the LSH Bunker Start mod, it seems something is missing in regards to Konstanza , after i disabled the mod the uboat spawned in Konstanza.

(en_menu.txt)
749=INFO ABOUT FLOTILLAS
750=Kiel-Tirpitzhafen
751=Brest
752=Wilhelmshaven
753=Lorient
754=St. Nazaire
755=Bergen
756=Danzig
757=La Spezia
758=Toulon
759=Flensburg
760=Trondheim
761=Stralsund
762=Bordeaux
763=Ast. Penang
764=Buenos Aires - Marineversorger "Eutin"
765=Salamis
767=Kaseburg
768=Kiel-Kilianbunker
769=Narvik
770=La Rochelle
771=Konstanza
772=Kobe
773=Surabaya

Spruence M · 04-03-18, 03:28 AM

I am installing SH3 for the first time in a couple of years, it's been a while, but a great game is still great.

Problem: After entering the serial code, I receive an error. "Unexpected Error 13:6" - Just downloaded my old copy from gamersgate and this might be the game trying to check with the servers?? to see if the code is valid, I don't know. Help would be much appreciated.

THEBERBSTER · 04-03-18, 06:24 AM

Hi TP

Quote:

the LSH Bunker Start mod, it seems something is missing in regards to Konstanza

Totally agree with you.
Disabling the mod and the problem disappears.
Peter

schlechter pfennig · 04-10-18, 05:02 AM

Decided to give this a whirl. So far four questions:

Under video options, there are three choices. There are already ticked, and I am unable to toggle the selection
I am unable to deselect "autoload" for the torpedoes
When first loading/starting the game, I get a whole lotta error messages stating a menu isn't found
All of my info stuff (mines, flags, etc) are in German, even though I've selected English as my language

THEBERBSTER · 04-10-18, 05:31 AM

Hi sp
Make sure that your game is on a clean install and Windows 10 is in compatibility mode for Windows 7.

Use my tutorial from my signature as it will save you a lot of time.

Quote:

Under video options, there are three choices. There are already ticked, and I am unable to toggle the selection

You should be able to make selections in options.

It is important that you enter the Naval academy to setup your V15 saved game folder first.

You must start a test mission first without making any changes to your boat.

Quote:

All of my info stuff (mines, flags, etc) are in German, even though I've selected English as my language

There are 2 download options English and German.
Peter

schlechter pfennig · 04-10-18, 10:53 AM

Quote:

Originally Posted by THEBERBSTER

Hi sp
Make sure that your game is on a clean install and Windows 10 is in compatibility mode for Windows 7.

I have Windows 7, not 10. And I can't do a complete uninstall/reg-clean/clean install, as I already have multiple copies/mods (GWX, NYGM, WAC 5.0, as just a few) currently installed.

Quote:

Originally Posted by THEBERBSTER

Use my tutorial from my signature as it will save you a lot of time.

As a great believer in "RTFM", the tutorial was the first thing I read, front-to-back, before I even started downloading the files.

Quote:

Originally Posted by THEBERBSTER

You should be able to make selections in options.

I'm sure I should be able to make those changes. However, I cannot. Clicking on them does not toggle the status.

Quote:

Originally Posted by THEBERBSTER

It is important that you enter the Naval academy to setup your V15 saved game folder first.

You must start a test mission first without making any changes to your boat.

I did (enter the Naval Academy) , and I did (start a test mission first), and I didn't (make any changes).

Quote:

Originally Posted by THEBERBSTER

There are 2 download options English and German.

I do not remember seeing any language options. And now that I've already downloaded and installed LSH, I'm not sure what sort of conflicts I'll encounter just uninstalling/reinstalling just that, as I'm not willing to completely wipe every iteration of SH3 from my drive just to do a clean reinstall.

Thanks for the quick responses!

ThePrody · 04-10-18, 12:15 PM

i also got those menu id errors when i installed the first time, there are some fixes that you need to install and it will run fine afterwards :
http://www.subsim.com/radioroom/show...32&postcount=3

THEBERBSTER · 04-10-18, 01:26 PM

Hi TP

Quote:

there are some fixes that you need to install

They are already fixed in the latest version you have.
Peter

Bilge_Rat · 04-10-18, 01:40 PM

Quote:

Originally Posted by schlechter pfennig

[*]All of my info stuff (mines, flags, etc) are in German, even though I've selected English as my language[/LIST]

you are talking about the additional charts available on the main navigation chart page?, i.e. F5. AFAIK these are only available in German. However, they are easy to figure out even for a non-german speaker.

ThePrody · 04-10-18, 02:08 PM

Quote:

Originally Posted by THEBERBSTER

Hi TP
They are already fixed in the latest version you have.
Peter

i installed it a couple of months ago and i got those menu id errors, i installed that fix for GUI again and they were gone .

Bilge_Rat · 04-11-18, 08:51 AM

so this is more of an esoteric question, but I used to start LSH via the enclosed LSH3 shortcut.

Lately, I started the game via SH3 commander, but I get infrequent CTDs.

Is there an advantage to starting the game via SH3 commander as opposed to the LSH3 shortcut?

THEBERBSTER · 04-11-18, 03:10 PM

Hi BR

Quote:

Lately, I started the game via SH3 commander, but I get infrequent CTDs.

Where are the ctd's occurring?
Ctd's to the loading screen happens when you do not run your applications as administrators especially important the SH3.exe.
Ctd's failing to reach the Command Room is a Windows 10 compatibility issue.
Have you checked out the tutorials from my signature for the correct procedures and setups?
Peter

Bilge_Rat · 04-11-18, 03:42 PM

Hi, the CTDs occur while running the game. Again, very infrequent, but annoying when you have to restart from the last save.

04-02-18, 03:17 AM	#1037
ThePrody not dead yet Join Date: May 2017 Location: Romania Posts: 193 Downloads: 130 Uploads: 1	Hi Thanks for the reply . I don't have Thomsen sound pack . Is there anything i should look for or modify in the en_menu.txt ? Also, it is not possible to start directly in the 30th flotilla, should i always use the training flotilla start and transfer ? Thanks L.E. : i tried it via Training Flotilla and transfer and same result . However i found the culprit : the LSH Bunker Start mod, it seems something is missing in regards to Konstanza , after i disabled the mod the uboat spawned in Konstanza. Last edited by ThePrody; 04-02-18 at 04:22 AM.

04-03-18, 03:28 AM	#1039
Spruence M Sonar Guy Join Date: Apr 2007 Location: 14 Meters Posts: 394 Downloads: 29 Uploads: 0	Fresh SH3 Install Problems I am installing SH3 for the first time in a couple of years, it's been a while, but a great game is still great. Problem: After entering the serial code, I receive an error. "Unexpected Error 13:6" - Just downloaded my old copy from gamersgate and this might be the game trying to check with the servers?? to see if the code is valid, I don't know. Help would be much appreciated.

04-10-18, 05:02 AM	#1041
schlechter pfennig Commander Join Date: Mar 2010 Posts: 462 Downloads: 53 Uploads: 7	Decided to give this a whirl. So far four questions: Under video options, there are three choices. There are already ticked, and I am unable to toggle the selection I am unable to deselect "autoload" for the torpedoes When first loading/starting the game, I get a whole lotta error messages stating a menu isn't found All of my info stuff (mines, flags, etc) are in German, even though I've selected English as my language

04-11-18, 08:51 AM	#1048
Bilge_Rat Silent Hunter Join Date: Apr 2002 Location: standing watch... Posts: 3,856 Downloads: 344 Uploads: 0	so this is more of an esoteric question, but I used to start LSH via the enclosed LSH3 shortcut. Lately, I started the game via SH3 commander, but I get infrequent CTDs. Is there an advantage to starting the game via SH3 commander as opposed to the LSH3 shortcut? __________________

04-11-18, 03:42 PM	#1050
Bilge_Rat Silent Hunter Join Date: Apr 2002 Location: standing watch... Posts: 3,856 Downloads: 344 Uploads: 0	Hi, the CTDs occur while running the game. Again, very infrequent, but annoying when you have to restart from the last save. __________________

04-10-18, 12:15 PM	#1044
ThePrody not dead yet Join Date: May 2017 Location: Romania Posts: 193 Downloads: 130 Uploads: 1	i also got those menu id errors when i installed the first time, there are some fixes that you need to install and it will run fine afterwards : http://www.subsim.com/radioroom/show...32&postcount=3