Torpedo speed setting question

Pisces · 03-21-18, 11:52 AM

There is a bug in the TDC that causes lead angles not to be updated when you switch between selected tubes with different torpedo types set to different speeds, i.e. T1 and T2. So it is best to set all of them to the common speed, lest you mess up your aiming. Whatever reality was like , this is more important to avoid in my opinion.

p.s. Scuttlebutt (or what is the german equivalent of navy gossip?) says it isn't so easy to modify the T1 torpedo speed controlling hardware. Atleast not on the fly. So this seems a reasonable realism limitation to do.

Rhodes · 03-21-18, 06:14 PM

Pisces, do not know if I understood your last paragraph, but if it is about if the torpedo speed could be changed via the TDC or not, it could be.

The torpedo speed vt and quotient of the target and torpedo speed vgvt was entered by means of the knobs.
In the early versions of the calculator, the torpedo speed knob could be set only in three positions (30, 40, or 44 knots – the speed of the steam torpedoes G7a then in service could be set to these values, while the electric torpedoes G7e could cruise only at the speed of 30 knots). The quotient vgvt
and the torpedo speed vt were given as inputs of the multiplier unit ( ), which calculated the target speed vg indicated by the dial. After setting the desired torpedo speed, the operator turned the knob responsible for setting the quotient of the target and torpedo speed, to make the pointer of the target speed dial show the correct value.
Thereby, instead of using the complex dividing unit for calculating the quotient, the much simpler multiplier unit could be used.
In the later version of the calculator, the target and torpedo speed were shown by the compound dial. The torpedo speed could be set to any value in the range 10 to 46 knots. This was due to adjusting the calculator’s construction for usage with the LUT and acoustic G7e torpedoes.

From: http://www.tvre.org/en/torpedo-calculator-t-vh-re-s3

bstanko6 · 03-21-18, 07:00 PM

Quick tip in setting several torpedoes to the same setting...

Set your TDC to salvo shooting...
Select the tubes you want.

Set the torps how you want.

Select single shooting again.

Pisces · 03-22-18, 07:28 AM

I meant that the torpedo-mechanic couldn't change the speed of the torpedo on the fly in the tubes. Surely the real-life TDC could be adjusted for different torpedo speeds on demand. But I have understood from reports made here on the silent Hunter forums (by real life submariners/torpedo mechanics or those that did the research) that torpedo-mechanics would need to adjust something mechanically internal on the torpedo. This wouldn't be possible if it is already in the tube and flooded.

In the game however, you can flip the switch whenever you want. But the TDC won't calculate with the proper speed when you select a different tube with a different speed setting.

schlechter pfennig · 03-22-18, 08:46 AM

Quote:

Originally Posted by Pisces

I meant that the torpedo-mechanic couldn't change the speed of the torpedo on the fly in the tubes.

That's the reason I don't change pistol settings during an attack, but only prior to one, because it was a decidedly involved process to change the pistols. It wasn't as easy as flipping a switch. However, I never knew that the speed settings were just as involved, I'd always thought it has something to do with the internal gearing, or somesuch, that could be adjustable while in the tube, much the same way as depth and gyro settings were.

Thanks to you, I'll now be setting the speeds ahead of time and, if it winds up being less than optimal at that point, owell.

Thanks for the info! Very much appreciated!

Pisces · 03-22-18, 11:51 AM

Quote:

Originally Posted by schlechter pfennig

...However, I never knew that the speed settings were just as involved, I'd always thought it has something to do with the internal gearing, or somesuch, that could be adjustable while in the tube, much the same way as depth and gyro settings were....

To be honest, I might be mixing those two reasons up. My source is hear-say and from memory years old.

I have to admit that I am guilty of claiming this real-life restrictions with as much evidence as a 'flat earther' usually defends his/her's opinion. Don't take my statement serious for fact. It sounded reasonable and in line with workarounds for the game bug. But I could certainly be wrong.

Rhodes · 03-22-18, 10:02 AM

Quote:

Originally Posted by Pisces

I meant that the torpedo-mechanic couldn't change the speed of the torpedo on the fly in the tubes. Surely the real-life TDC could be adjusted for different torpedo speeds on demand. But I have understood from reports made here on the silent Hunter forums (by real life submariners/torpedo mechanics or those that did the research) that torpedo-mechanics would need to adjust something mechanically internal on the torpedo. This wouldn't be possible if it is already in the tube and flooded.

I see, so the torpedo speed setting knob in the TDC was just to input a valour for calculation and didn't had any rod or connection to the torpedo.
Reading from the site I posted I got the idea of when selecting the speed of a torpedo, it was connected and so it would change directly.

schlechter pfennig · 03-22-18, 10:19 AM

Something interesting about the TDC:

"The heart of the torpedo fire control system was the torpedo calculator designated T. Vh. Re. S3, manufactured by the Siemens Company . . .

The development of this calculator started around the year 1939. In 1941 it was (together with the whole torpedo fire control system) delivered to the Kriegsmarine for testing. In the same year – after successfully passing all tests – the newly manufactured calculators were fitted in the front-going U-Boats.
From 1941 when the calculator entered service, till the end of the war, there were some modifications to its construction." (http://www.tvre.org/en/torpedo-calculator-t-vh-re-s3)

The TDC which appears in-game is this TDC. But this TDC didn't enter service, according to the aforementioned article, until 1941, two years after the war started.

Pisces · 03-22-18, 11:54 AM

Quote:

Originally Posted by Rhodes

I see, so the torpedo speed setting knob in the TDC was just to input a valour for calculation and didn't had any rod or connection to the torpedo.
Reading from the site I posted I got the idea of when selecting the speed of a torpedo, it was connected and so it would change directly.

See my latest reply. I might have mixed up the detonator pistol procedures with this topic.

Rhodes · 03-22-18, 04:51 PM

Quote:

Originally Posted by Pisces

See my latest reply. I might have mixed up the detonator pistol procedures with this topic.

Already saw.

03-21-18, 06:14 PM	#2
Rhodes Silent Hunter Join Date: Aug 2005 Location: Figueira da Foz, Portugal Posts: 4,520 Downloads: 110 Uploads: 0	Pisces, do not know if I understood your last paragraph, but if it is about if the torpedo speed could be changed via the TDC or not, it could be. The torpedo speed vt and quotient of the target and torpedo speed vgvt was entered by means of the knobs. In the early versions of the calculator, the torpedo speed knob could be set only in three positions (30, 40, or 44 knots – the speed of the steam torpedoes G7a then in service could be set to these values, while the electric torpedoes G7e could cruise only at the speed of 30 knots). The quotient vgvt and the torpedo speed vt were given as inputs of the multiplier unit ( ), which calculated the target speed vg indicated by the dial. After setting the desired torpedo speed, the operator turned the knob responsible for setting the quotient of the target and torpedo speed, to make the pointer of the target speed dial show the correct value. Thereby, instead of using the complex dividing unit for calculating the quotient, the much simpler multiplier unit could be used. In the later version of the calculator, the target and torpedo speed were shown by the compound dial. The torpedo speed could be set to any value in the range 10 to 46 knots. This was due to adjusting the calculator’s construction for usage with the LUT and acoustic G7e torpedoes. From: http://www.tvre.org/en/torpedo-calculator-t-vh-re-s3 __________________ http://www.flickr.com/photos/16416646@N05/ Last edited by Rhodes; 03-22-18 at 05:37 AM.

03-22-18, 10:19 AM	#8
schlechter pfennig Commander Join Date: Mar 2010 Posts: 462 Downloads: 53 Uploads: 7	Something interesting about the TDC Something interesting about the TDC: "The heart of the torpedo fire control system was the torpedo calculator designated T. Vh. Re. S3, manufactured by the Siemens Company . . . The development of this calculator started around the year 1939. In 1941 it was (together with the whole torpedo fire control system) delivered to the Kriegsmarine for testing. In the same year – after successfully passing all tests – the newly manufactured calculators were fitted in the front-going U-Boats. From 1941 when the calculator entered service, till the end of the war, there were some modifications to its construction." (http://www.tvre.org/en/torpedo-calculator-t-vh-re-s3) The TDC which appears in-game is this TDC. But this TDC didn't enter service, according to the aforementioned article, until 1941, two years after the war started.

03-21-18, 11:52 AM	#1
Pisces Silent Hunter Join Date: Dec 2004 Location: AN9771 Posts: 4,904 Downloads: 304 Uploads: 0	There is a bug in the TDC that causes lead angles not to be updated when you switch between selected tubes with different torpedo types set to different speeds, i.e. T1 and T2. So it is best to set all of them to the common speed, lest you mess up your aiming. Whatever reality was like , this is more important to avoid in my opinion. p.s. Scuttlebutt (or what is the german equivalent of navy gossip?) says it isn't so easy to modify the T1 torpedo speed controlling hardware. Atleast not on the fly. So this seems a reasonable realism limitation to do.

03-21-18, 07:00 PM	#3
bstanko6 Admiral Join Date: Feb 2015 Location: Murwik Naval Academy Posts: 2,130 Downloads: 390 Uploads: 13	Quick tip in setting several torpedoes to the same setting... Set your TDC to salvo shooting... Select the tubes you want. Set the torps how you want. Select single shooting again.

03-22-18, 07:28 AM	#4
Pisces Silent Hunter Join Date: Dec 2004 Location: AN9771 Posts: 4,904 Downloads: 304 Uploads: 0	I meant that the torpedo-mechanic couldn't change the speed of the torpedo on the fly in the tubes. Surely the real-life TDC could be adjusted for different torpedo speeds on demand. But I have understood from reports made here on the silent Hunter forums (by real life submariners/torpedo mechanics or those that did the research) that torpedo-mechanics would need to adjust something mechanically internal on the torpedo. This wouldn't be possible if it is already in the tube and flooded. In the game however, you can flip the switch whenever you want. But the TDC won't calculate with the proper speed when you select a different tube with a different speed setting.