[REL] Radar Fix for Sh3

[La vache]

Hallo makman94

In my opinion, stock with the correct 'cadrane_radio_7' is more logical. I mean that if the operator is turning the wheel clockwise,for example 20°,you expect to read 20° at the wheel and this is happening now at stock with the correct 'cadrane_radio_7'. (at gwx if you turn the wheel clockwise for 20° ,you read 340°).

If they have a pointer about scale turn this clockwise, as on hydrophone.
A scale rotates on a fixed pointer counterclockwise.

45 ° is but right from 0 ° not left.
Change direction of rotation as in the picture seems to me more meaningful.

[makman94]

Originally Posted by Tycho

I don't know. These days I suffer of lack of personal time, but promise to look for this, when I will be free.

thank you Tycho

Originally Posted by La vache

Hallo makman94


If they have a pointer about scale turn this clockwise, as on hydrophone.
A scale rotates on a fixed pointer counterclockwise.

45 ° is but right from 0 ° not left.
Change direction of rotation as in the picture seems to me more meaningful.

hello La vache,

whatever set up seems comfort to anyone is the good to use.
The wheel bearings must increase to the direction the wheel is turning(at sweep mode).
To tell it with other words: if your wheel is turning clockwise at sweep mode (like in stock) then your '45°' must be at the left of 0° but if your wheel is turning conterclockwise at sweep mode (like in gwx) then your '45°' must be at the right of 0°.
Anyway, as i said above, the way the wheel is spinning has less importance and everyone can set it as he likes.
Both setups, stock (but with the correct 'cadrane_radio_7' image) and gwx are showing the correct bearings so the way the wheel is spinning has no any valuable interest ,at least, for me.

my main interest is that radar's code seems to be broken.Further tests i am making are showing that the radar is not picking all the targets in the area or it is picking some or it is picking ...none ! i allready tried many different settings on radar sensors but nothing...the behaviour is still the same. i have made a mission were there are 8 ships around the uboat and the radar is picking....none. Tried the same mission on different versions of sh3 with their standar settings on radar (no any mods installed) and ....nothing...no picks on radar allthough they are appearing on map and RO is informing for their existance).

here is the mission for everyone to try out:
http://www.mediafire.com/file/61qsid...t+Radar+05.rar

Make sure to pick the viic/41 (1945) uboat in order to have the Fumo30 (at stock , WAC and gwx the viic/41 (1945) is equipped with the Fumo30 )

do you get any pick on your radar display ?

[Tycho]

Originally Posted by makman94

my main interest is that radar's code seems to be broken.Further tests i am making are showing that the radar is not picking all the targets in the area or it is picking some or it is picking ...none ! i allready tried many different settings on radar sensors but nothing...the behaviour is still the same. i have made a mission were there are 8 ships around the uboat and the radar is picking....none. Tried the same mission on different versions of sh3 with their standar settings on radar (no any mods installed) and ....nothing...no picks on radar allthough they are appearing on map and RO is informing for their existance).

do you get any pick on your radar display ?

Hi, makman
Last night, I found some time, to test your mission. Indeed, there are no peaks on radar oscillation, from this position. Then I came close to one of the ships, and radar start to show peaks exactly after distance came down to 1500m. Then I went back and the peaks disappear as soon as distance exceed 1500m. Very strange behavior.
This does not affect radar sensor, my radioman report contacts, correctly from the beginings. This only affect the visual representation on radar screen.
I tested on some other single mission and there didn't have such problems.
Will continue to test this, next days.

[makman94]

Originally Posted by Tycho

Hi, makman
Last night, I found some time, to test your mission. Indeed, there are no peaks on radar oscillation, from this position. Then I came close to one of the ships, and radar start to show peaks exactly after distance came down to 1500m. Then I went back and the peaks disappear as soon as distance exceed 1500m. Very strange behavior.
This does not affect radar sensor, my radioman report contacts, correctly from the beginings. This only affect the visual representation on radar screen.
I tested on some other single mission and there didn't have such problems.
Will continue to test this, next days.

hello Tycho,

yes, thats exactly what i get too. Also , i noticed that if you delete some ships from the above mission (for example the ships that are at N,E,S,W) the radar is getting the pics of the remaining ones. That is also so strange...
Lets hope to be something fixable (meanwhile as i am not good at writting missions...i am thinking if there is something faulty in the mission's writting.Not that i give many chances to that but have a look in there too)

Hi. Any news ?