[REL]GridXXXX scheme - Page 3

bstanko6 · 04-28-15, 07:58 PM

Tycho, I sent you a partial of my menu. I don't get it either. The instructions are very clear and easy to understand. It has to be something in my gui. I bet if I run it stock I would see it. I'm going to try that.

Tycho · 04-29-15, 06:43 AM

Quote:

Originally Posted by Fahnenbohn

I've modified Tycho's grids, because in my opinion, the chart was too hard to read :

Hi, Fahnenbohn! What are you waiting, feel free to release your version.

Quote:

Originally Posted by bstanko6

Tycho, I sent you a partial of my menu. I don't get it either. The instructions are very clear and easy to understand. It has to be something in my gui. I bet if I run it stock I would see it. I'm going to try that.

I send you PM.

Fahnenbohn · 04-30-15, 06:37 AM

My modification is available here :

ftp://hartmuthaas.no-ip.org/public/S...ODS/FAHNENBOHN

User : Maik
Password : Woelfe

sublynx · 04-30-15, 08:08 AM

Oh great! Just lovely to get this modification as I use gridxxxx all the time, every patrol. Thanks Fahnenbohn and Tycho!

Sailor Steve · 04-30-15, 03:03 PM

I just tried Fahnenbohn's version, and I like it! Well, I like them both. This version is easier to read, but Tycho's original has a kind of special feel to it, like it belongs there.

I still don't have the Harbor Maps pull-down. Either I lost the TGA somehow or I somehow changed the menu.ini. I'm not sure how I could have done either, but I am pretty sure it's something I did.

So, can anyone tell me which menu.ini number controls the position of that one? I'm going to go back and check the .tgas now.

Sailor Steve · 05-11-15, 10:22 AM

I took out and re-installed everything. I've decided to go with Tycho's original version. Everything works fine, but I still don't have the harbor maps pull-down. It shows up if I remove the menu.ini entry for the XXXX mod, and goes away again when I replace that entry. I see no reason why it should do that, but it does.

CaptBones · 05-11-15, 12:34 PM

Hello again Steve...

Do the two Speed-Distance Tables still show up when you put the GridXXXX overlay in place?

I have all of them, the GridXXXX overlay, Harbor Minefield/Net ("Sperrnetze") charts and the two Speed-Distance Tables, without any problem like you described.

The "Sperrnetze" .tga is called out in "FLB's NavMap mod" as item [G31 I21], which (strangely) is almost all the way down at the bottom of my 'menu_1024_768.ini' page, together with items I22, 23 & 24; they do not appear together with the other G31 items called-out near the top of the page. If your GridXXXX is overwriting that item, you could either renumber the GridXXXX or the "Sperrnetze" and get them to both play nice together.

Hope you can find the source of the problem...sink 'em all.

Sailor Steve · 05-11-15, 12:57 PM

Quote:

Originally Posted by CaptBones

Do the two Speed-Distance Tables still show up when you put the GridXXXX overlay in place?

Yes they do.

Quote:

The "Sperrnetze" .tga is called out in "FLB's NavMap mod" as item [G31 I21], which (strangely) is almost all the way down at the bottom of my 'menu_1024_768.ini' page, together with items I22, 23 & 24; they do not appear together with the other G31 items called-out near the top of the page. If your GridXXXX is overwriting that item, you could either renumber the GridXXXX or the "Sperrnetze" and get them to both play nice together.

I haven't looked yet, responding as soon as I saw your reply, but I'm betting I'll find that's the problem. I hadn't even thought of that, but you're right, people tack lots of things onto the end without bothering to blend them. I'll find out soon enough.

Thanks for reminding me of that. I'll check it poste-haste.

Sailor Steve · 05-11-15, 02:03 PM

Yep, that was it. I almost always forget to check at the bottom. When I do my habit is to transfer everything up to where it belongs. Doing it this time I noticed that something else was numbered incorrectly, probably on my part. When I renumbered everything I found that not only did I have the Harbor Charts back, but also the SH3 Convoy Route Chart! Since I never use that one I hadn't even noticed it wasn't there! Now I have them all.

Thanks for pointing that out.

CaptBones · 05-11-15, 02:34 PM

Glad it was just that simple...good hunting!

nocken · 01-25-16, 06:24 AM

does tychos quote.Edit data/menu/menu_1024_768.ini . only work on n.y.g.m. using magui. f. or can it be used in normal magui f. on gwx. edition.

any input would be a god send.

Sailor Steve · 01-25-16, 06:38 AM

I don't have NYGM and I don't have any GUI mod, and it works fine for me.

Fahnenbohn · 01-25-16, 07:00 AM

Quote:

Originally Posted by nocken

does tychos quote.Edit data/menu/menu_1024_768.ini . only work on n.y.g.m. using magui. f. or can it be used in normal magui f. on gwx. edition.

any input would be a god send.

This mod can work with any installation. You just have to read carefully the Readme file. I advise you to create a mod for JSGME, and add the modified menu in it.

Good luck.

F.

nocken · 01-25-16, 09:47 AM

thank you for your advise. the both of you.
will give it a whirl.

nocken.

nocken · 01-25-16, 10:23 AM

well gave it a try followed tychos instruction. no joy.?. copied and pasted in to data. menu. overlay.etc. same with [G----]. no results. any ideas. please.

nocken

04-28-15, 07:58 PM	#31
bstanko6 Admiral Join Date: Feb 2015 Location: Murwik Naval Academy Posts: 2,130 Downloads: 390 Uploads: 13	Tycho, I sent you a partial of my menu. I don't get it either. The instructions are very clear and easy to understand. It has to be something in my gui. I bet if I run it stock I would see it. I'm going to try that. __________________ [SIGPIC][/SIGPIC] BSTANKO6'S SH5 NAVAL ACADEMY http://www.youtube.com/channel/UCPbe...W2NArCA/videos DISCORD https://discord.gg/6tFeTSUmVc

04-30-15, 08:08 AM	#34
sublynx Sea Lord Join Date: Mar 2011 Location: In the conning tower of my VIIC scanning the sea through the periscope Posts: 1,698 Downloads: 173 Uploads: 7	Oh great! Just lovely to get this modification as I use gridxxxx all the time, every patrol. Thanks Fahnenbohn and Tycho! __________________ [SIGPIC][/SIGPIC] NYGM+H.sie v16+Stiebler 4C+MaGui WS

04-30-15, 03:03 PM	#35
Sailor Steve Eternal Patrol Join Date: Nov 2002 Location: High in the mountains of Utah Posts: 50,369 Downloads: 745 Uploads: 249	I just tried Fahnenbohn's version, and I like it! Well, I like them both. This version is easier to read, but Tycho's original has a kind of special feel to it, like it belongs there. I still don't have the Harbor Maps pull-down. Either I lost the TGA somehow or I somehow changed the menu.ini. I'm not sure how I could have done either, but I am pretty sure it's something I did. So, can anyone tell me which menu.ini number controls the position of that one? I'm going to go back and check the .tgas now. __________________ “Never do anything you can't take back.” —Rocky Russo

05-11-15, 10:22 AM	#36
Sailor Steve Eternal Patrol Join Date: Nov 2002 Location: High in the mountains of Utah Posts: 50,369 Downloads: 745 Uploads: 249	I took out and re-installed everything. I've decided to go with Tycho's original version. Everything works fine, but I still don't have the harbor maps pull-down. It shows up if I remove the menu.ini entry for the XXXX mod, and goes away again when I replace that entry. I see no reason why it should do that, but it does. __________________ “Never do anything you can't take back.” —Rocky Russo

05-11-15, 12:34 PM	#37
CaptBones The Old Man Join Date: Nov 2010 Location: Rockton, IL Posts: 281 Downloads: 208 Uploads: 0	That is strange Hello again Steve... Do the two Speed-Distance Tables still show up when you put the GridXXXX overlay in place? I have all of them, the GridXXXX overlay, Harbor Minefield/Net ("Sperrnetze") charts and the two Speed-Distance Tables, without any problem like you described. The "Sperrnetze" .tga is called out in "FLB's NavMap mod" as item [G31 I21], which (strangely) is almost all the way down at the bottom of my 'menu_1024_768.ini' page, together with items I22, 23 & 24; they do not appear together with the other G31 items called-out near the top of the page. If your GridXXXX is overwriting that item, you could either renumber the GridXXXX or the "Sperrnetze" and get them to both play nice together. Hope you can find the source of the problem...sink 'em all.

04-30-15, 06:37 AM	#33
Fahnenbohn Ace of the Deep Join Date: Sep 2013 Location: France Posts: 1,072 Downloads: 155 Uploads: 0	My modification is available here : ftp://hartmuthaas.no-ip.org/public/S...ODS/FAHNENBOHN User : Maik Password : Woelfe

05-11-15, 02:03 PM	#39
Sailor Steve Eternal Patrol Join Date: Nov 2002 Location: High in the mountains of Utah Posts: 50,369 Downloads: 745 Uploads: 249	Yep, that was it. I almost always forget to check at the bottom. When I do my habit is to transfer everything up to where it belongs. Doing it this time I noticed that something else was numbered incorrectly, probably on my part. When I renumbered everything I found that not only did I have the Harbor Charts back, but also the SH3 Convoy Route Chart! Since I never use that one I hadn't even noticed it wasn't there! Now I have them all. Thanks for pointing that out. __________________ “Never do anything you can't take back.” —Rocky Russo

05-11-15, 02:34 PM	#40
CaptBones The Old Man Join Date: Nov 2010 Location: Rockton, IL Posts: 281 Downloads: 208 Uploads: 0	Oo-Rah! Glad it was just that simple...good hunting!

01-25-16, 06:24 AM	#41
nocken Engineer Join Date: Feb 2012 Location: sheffield.uk Posts: 200 Downloads: 1763 Uploads: 0	grid xxx does tychos quote.Edit data/menu/menu_1024_768.ini . only work on n.y.g.m. using magui. f. or can it be used in normal magui f. on gwx. edition. any input would be a god send.

01-25-16, 06:38 AM	#42
Sailor Steve Eternal Patrol Join Date: Nov 2002 Location: High in the mountains of Utah Posts: 50,369 Downloads: 745 Uploads: 249	I don't have NYGM and I don't have any GUI mod, and it works fine for me. __________________ “Never do anything you can't take back.” —Rocky Russo

01-25-16, 09:47 AM	#44
nocken Engineer Join Date: Feb 2012 Location: sheffield.uk Posts: 200 Downloads: 1763 Uploads: 0	thank you thank you for your advise. the both of you. will give it a whirl. nocken.

01-25-16, 10:23 AM	#45
nocken Engineer Join Date: Feb 2012 Location: sheffield.uk Posts: 200 Downloads: 1763 Uploads: 0	grid xxxx well gave it a try followed tychos instruction. no joy.?. copied and pasted in to data. menu. overlay.etc. same with [G----]. no results. any ideas. please. nocken