The SH5 Fix We Have All Been Waiting For Has Arrived

THEBERBSTER · 11-07-15, 04:33 PM

Hi Bera

Quote:

Does it make any difference if I play in online or offline mode?

No.

Quote:

none of the tonnage bars of the missions are filling up so far.

You should notice if you have followed the tutorial correctly that after you have saved your game the missions that were showing as pending will now show as finished.

If they are still showing as pending then you have not followed Mama's instructions properly.

Quote:

Must be anything related to OHII?

No.

Peter

Bera · 11-07-15, 04:46 PM

Quote:

Originally Posted by THEBERBSTER

Hi Bera
No.

You should notice if you have followed the tutorial correctly that after you have saved your game the missions that were showing as pending will now show as finished.

If they are still showing as pending then you have not followed Mama's instructions properly.

No.

Peter

Hi Peter, they are showing as "finished", but I think that´s because the date limit for them expired. They usually show as "completed" when the tonnage bar is filled, but the small iron crosses aren´t appearing. I did the tutorial correctly, I´m even able to set the process priority to "real time"...

Thanks!

THEBERBSTER · 11-07-15, 05:13 PM

Hi Bera

I forgot about the completed bit as its a long time since I was able to use a working tonnage bar.

The tonnage bar does not recognize all the ships that you sink only the ones that pertain to the mission you are in.

[QUOTE]they are showing as "finished", but I think that´s because the date limit for them expired. [/QUOTE
Yes I agree with you on that point they will stay as finished.

Do not forget that you need to do part 2 of the tutorial every time you play your game.

It will be interesting to see who you get on now when you start a new mission using MaMa's fix rather than one that is already open.

Peter

petecaler · 11-07-15, 06:35 PM

What if ive never installed TDW’s Generic File Patcher? Ive only used JGME. Do I still need to do anything to modify uplay?

THEBERBSTER · 11-07-15, 06:52 PM

Hi Pete

In the tutorial start at picture 3 in your Program (x86) folder.

Part 2 always needs to be done every time, ok.

Peter

xXNightEagleXx · 11-07-15, 06:56 PM

After i applied this fix i started to have random CTD without any sort of error. Is it "normal"?

THEBERBSTER · 11-07-15, 07:00 PM

Hi NE

I have used it a few times now and no problems at all.

77 TWOS manual save games to date, no CTD's.

Peter

petecaler · 11-08-15, 02:10 PM

Quote:

Originally Posted by THEBERBSTER

Hi Pete

In the tutorial start at picture 3 in your Program (x86) folder.

Part 2 always needs to be done every time, ok.

Peter

Thanks Peter, I appreciate the info.

Jack_02 · 01-03-17, 07:26 PM

I haven't been able to get Mama's fix working. I did all of the steps but the tonnage bar just isn't filling up... I don't have TDW's Generic File Patcher if that's important and I looked at Vecko's fix but it seems that you have to start on the third campaign and I don't want to miss the first two. Is there any way to play the 1st & 2nd campaign with Vecko's fix?
Also if it makes a difference I am using the Steam version. Does this bug still exist with the Standalone version?

Aktungbby · 01-03-17, 07:33 PM

Jack_02!

BroncoFlamenco · 06-01-19, 06:04 AM

I want to thank aswell. You guys made a wonderfull job. I just managed to install the mod for SH5 and it blew me away. (I allready had a good impression from YT)
So, thumbs up!

XenonSurf · 06-01-19, 06:09 AM

Quote:

Originally Posted by BroncoFlamenco

I want to thank aswell. You guys made a wonderfull job. I just managed to install the mod for SH5 and it blew me away. (I allready had a good impression from YT)
So, thumbs up!

Good to know that it works for you, but be aware that you also must have a modlist with Open Horizons II v.2.5 and TDW NewUIs 7_5_0 installed, although: only using the 'Campaign.cfg' files from the mod to advance in the campaign (like I said above) should work everywhere, with any mods.

Also if you run the mod The Wolfes of Steel you DONT' NEED this mod, and should not install any extra mods.

Cheers and welcome to Subsim!

XS

Iraqveteran99 · 06-11-20, 07:15 AM

is there a fix to make a working Schnorchel?

KleineUboot · 03-02-21, 07:15 AM

But what about those who play without TWoS mod? I mean, TWoS installer cannot see .exe files and .dll libraries in game folder for some reason in my case; launched as an admin.

Bera · 11-07-15, 08:20 PM

[QUOTE=THEBERBSTER;2356483]Hi Bera

I forgot about the completed bit as its a long time since I was able to use a working tonnage bar.

The tonnage bar does not recognize all the ships that you sink only the ones that pertain to the mission you are in.

Quote:

they are showing as "finished", but I think that´s because the date limit for them expired. [/QUOTE
Yes I agree with you on that point they will stay as finished.

Do not forget that you need to do part 2 of the tutorial every time you play your game.

It will be interesting to see who you get on now when you start a new mission using MaMa's fix rather than one that is already open.

Peter

Hi Peter,

I've been using MaMa's fix since he posted it on this forum.

I was then about halfway through "Western Approaches" campaign. My tonnage bar filled up on almost all the missions (except those that their date limits were already reached).

However, on "Turning Point", none of the tonnage bars were filled! The missions are all like "tonnage wars XX", and the mission area is quite large (most of the north atlantic). I tried to sink ships only on that area, but no luck... Strange!

I have not disabled the "no stupid tonnage bar" mod, must be something about this? I also asked about OHII on my first message because I don't know if OHII changed some of the mission objectives...

Thank you again!

11-07-15, 05:13 PM	#3
THEBERBSTER Growing Old Disgracefully Join Date: Dec 2012 Location: Hythe - Southampton Posts: 9,609 Downloads: 1133 Uploads: 0	Hi Bera I forgot about the completed bit as its a long time since I was able to use a working tonnage bar. The tonnage bar does not recognize all the ships that you sink only the ones that pertain to the mission you are in. [QUOTE]they are showing as "finished", but I think that´s because the date limit for them expired. [/QUOTE Yes I agree with you on that point they will stay as finished. Do not forget that you need to do part 2 of the tutorial every time you play your game. It will be interesting to see who you get on now when you start a new mission using MaMa's fix rather than one that is already open. Peter __________________ LSH3-2015 <> TUTORIALS <> ALL YOU NEED TO KNOW <> ALL IN ONE PLACE SH4 <> TUTORIALS <> HOW TO DO IT <> INFORMATION <> DOWNLOAD LINKS SH5 <> TUTORIALS <> HOW TO DO IT <> INFORMATION <> DOWNLOAD LINKS Always Here To Help A Fellow 'Subber' \| Need An Answer to A Question Just Send Me A PM

11-07-15, 06:35 PM	#4
petecaler Swabbie Join Date: Nov 2014 Posts: 9 Downloads: 104 Uploads: 0	NoTDW’s Generic File Patcher installed in SH5 What if ive never installed TDW’s Generic File Patcher? Ive only used JGME. Do I still need to do anything to modify uplay?

11-07-15, 06:52 PM	#5
THEBERBSTER Growing Old Disgracefully Join Date: Dec 2012 Location: Hythe - Southampton Posts: 9,609 Downloads: 1133 Uploads: 0	Hi Pete In the tutorial start at picture 3 in your Program (x86) folder. Part 2 always needs to be done every time, ok. Peter __________________ LSH3-2015 <> TUTORIALS <> ALL YOU NEED TO KNOW <> ALL IN ONE PLACE SH4 <> TUTORIALS <> HOW TO DO IT <> INFORMATION <> DOWNLOAD LINKS SH5 <> TUTORIALS <> HOW TO DO IT <> INFORMATION <> DOWNLOAD LINKS Always Here To Help A Fellow 'Subber' \| Need An Answer to A Question Just Send Me A PM

11-07-15, 07:00 PM	#7
THEBERBSTER Growing Old Disgracefully Join Date: Dec 2012 Location: Hythe - Southampton Posts: 9,609 Downloads: 1133 Uploads: 0	Hi NE I have used it a few times now and no problems at all. 77 TWOS manual save games to date, no CTD's. Peter __________________ LSH3-2015 <> TUTORIALS <> ALL YOU NEED TO KNOW <> ALL IN ONE PLACE SH4 <> TUTORIALS <> HOW TO DO IT <> INFORMATION <> DOWNLOAD LINKS SH5 <> TUTORIALS <> HOW TO DO IT <> INFORMATION <> DOWNLOAD LINKS Always Here To Help A Fellow 'Subber' \| Need An Answer to A Question Just Send Me A PM

01-03-17, 07:33 PM	#10
Aktungbby Gefallen Engel U-666 Join Date: Jul 2013 Location: On a tilted, overheated, overpopulated spinning mudball on Collision course with Andromeda Galaxy Posts: 29,979 Downloads: 24 Uploads: 0	Welcome aboard! Jack_02! __________________ "Only two things are infinite; The Universe and human squirrelyness?!!

11-07-15, 06:56 PM	#6
xXNightEagleXx Planesman Join Date: Aug 2015 Posts: 182 Downloads: 148 Uploads: 0	After i applied this fix i started to have random CTD without any sort of error. Is it "normal"?

01-03-17, 07:26 PM	#9
Jack_02 Nub Join Date: Dec 2016 Posts: 2 Downloads: 13 Uploads: 0	I haven't been able to get Mama's fix working. I did all of the steps but the tonnage bar just isn't filling up... I don't have TDW's Generic File Patcher if that's important and I looked at Vecko's fix but it seems that you have to start on the third campaign and I don't want to miss the first two. Is there any way to play the 1st & 2nd campaign with Vecko's fix? Also if it makes a difference I am using the Steam version. Does this bug still exist with the Standalone version?

06-01-19, 06:04 AM	#11
BroncoFlamenco Swabbie Join Date: May 2019 Location: Canary Islands Posts: 8 Downloads: 2 Uploads: 0	I want to thank aswell. You guys made a wonderfull job. I just managed to install the mod for SH5 and it blew me away. (I allready had a good impression from YT) So, thumbs up!

06-11-20, 07:15 AM	#13
Iraqveteran99 Watch Join Date: Aug 2019 Location: Texas Posts: 18 Downloads: 165 Uploads: 0	is there a fix to make a working Schnorchel?

03-02-21, 07:15 AM	#14
KleineUboot Seaman Join Date: May 2014 Location: Odesa, Ukraine Posts: 39 Downloads: 6 Uploads: 0	But what about those who play without TWoS mod? I mean, TWoS installer cannot see .exe files and .dll libraries in game folder for some reason in my case; launched as an admin.