[WIP] silentmichal's new interior mod - Page 31

gap · 07-23-15, 12:57 PM

Quote:

Originally Posted by TheBeast

I looked at this with GR2 Editor and found there are many Node GUID conflicts. This is also why External view may not be working.

Maybe Silentmichael can use the GR2 Editor to rename all the nodes in his MOD. GR2 Editor will automatically assign new GUID's to renamed Nodes.
This would require a lot of work, almost new mod.

Regards!
TheBeast

I think SilenMichael started working on this mod at an earlier stage of development of GR2 Editor. The current version of the editor is capable of detecting/preventing a wider range of errors.
Nice to see you around TheBeast

silentmichal · 07-23-15, 01:02 PM

That's true, I worked mainly on 1.1.2xx versions of TDW's software.

gap · 07-23-15, 01:51 PM

Quote:

Originally Posted by silentmichal

That's true, I worked mainly on 1.1.2xx versions of TDW's software.

Glad to hear from you too Michal! I hope one day you will find time and motivation for fixing your amazing mod

Nobon · 08-22-15, 03:19 AM

Hi! can you help me with one thing? I noticed that view drops down as you enter dining table area. That's a very nice feature

but I need it to drop down a lot more, to get a true "sit" feeling, when crawling up on the corner to think about things... What numbers can I change to lower the view when the view drops at the dining table?

Thanks!

silentmichal · 08-31-15, 12:13 PM

Quote:

Originally Posted by Nobon

Hi! can you help me with one thing? I noticed that view drops down as you enter dining table area. That's a very nice feature

but I need it to drop down a lot more, to get a true "sit" feeling, when crawling up on the corner to think about things... What numbers can I change to lower the view when the view drops at the dining table?

Thanks!

Hi!

Well it's not as easy like "changing numbers"

. Each room has its GR2 file. In each GR2 file there's a mesh called "Collisions" (or sth like that). To change the "sitting strength" you have to physically change this mesh (using TDW's GR2 Editor Viewer and then some 3D software, eg. 3ds Max or Blender should be sufficient). As far as I know - there's no any other way (easier) to do this.

Best regards,
Michael.

Jeff-Groves · 09-07-15, 03:56 PM

Quote:

Originally Posted by silentmichal

Hi!

Well it's not as easy like "changing numbers".

The Open Bunker I did was nothing but changing numbers.
No 3D software and it pre-dates TDW's program so it can be done.

Quote:

As far as I know - there's no any other way (easier) to do this.

If it's a square Collision box? 4 verts need adjusted in the GR2 file involved. If your good with a proper hex editor? It's much easier to do it that way.

silentmichal · 09-07-15, 04:10 PM

Quote:

Originally Posted by Jeff-Groves

The Open Bunker I did was nothing but changing numbers.
No 3D software and it pre-dates TDW's program so it can be done.

If it's a square Collision box? 4 verts need adjusted in the GR2 file involved. If your good with a proper hex editor? It's much easier to do it that way.

I'm not 3D guru, geek or whatever else

. I did this in a way I knew. If your way is indeed easier and better - feel free to present it here / give us some links. I'm sure it will be useful for further work (for me or somebody else).

Greetings,
Michael.

Jeff-Groves · 09-07-15, 04:17 PM

Not saying it's easier unless your a Hex Worker like TDW and myself.

He went on to work on his master piece program which is fantastic.
I still hack the GR2 files with 010 and my exporter.

A lot of what I do/did is/was based on the scripts/templates we had for GR2 files using 010.

Captain Victor · 09-19-15, 04:43 AM

Michał, mógłbyś dać dostęp do wersji 1.2.3 swojego moda? Fajne były te skrzynki w centrali, a teraz ich nie ma...

Michal, could you please give an access to a 1.2.3 version? These boxes in commander's deck were nice.

silentmichal · 09-19-15, 08:51 AM

Jasne, proszę //Sure, here you are:

https://drive.google.com/file/d/0B2A...ew?usp=sharing

Captain Victor · 09-20-15, 12:05 PM

Thanks.

Herr Graf · 10-03-15, 12:27 AM

Quote:

Originally Posted by Castorp24

I'm sorry, but if you mean my question, I haven't found an answer anywhere in the whole thread, which I checked entirely before posting. Then again, I may have missed it, and if I have, please accept my apologies.

I backed up the REM folder and installed despite the error and so far so good. I will keep you appraised if things go South.

Herr Graf · 10-04-15, 07:28 PM

Well,

I was bored so I uninstalled SH5, reinstalled and patched it than decided to use the WoS mod rather than sobers all in one.

I started a new Campaign and so far so good.

Raven_2012 · 01-02-16, 09:01 PM

What do I need to do to get this mod to work with The Wolf of Steel mod Pack?

Sjizzle · 01-03-16, 04:00 AM

Quote:

Originally Posted by Raven_2012

What do I need to do to get this mod to work with The Wolf of Steel mod Pack?

will brake your game this mod with TWOS they are incompatible

07-23-15, 01:02 PM	#452
silentmichal Frogman Join Date: Aug 2011 Location: Poland, my homeland. Posts: 304 Downloads: 241 Uploads: 0	That's true, I worked mainly on 1.1.2xx versions of TDW's software. __________________ Dining place in Silent Hunter 5? NOW it's possible ! My graphics mod available here: http://www.subsim.com/radioroom/showthread.php?t=200862

08-22-15, 03:19 AM	#454
Nobon Helmsman Join Date: Sep 2012 Location: 1939-09-13. U-50 ran into a 10+ ship british convoy- I'm planning the approach Posts: 103 Downloads: 75 Uploads: 2	Hi! can you help me with one thing? I noticed that view drops down as you enter dining table area. That's a very nice feature but I need it to drop down a lot more, to get a true "sit" feeling, when crawling up on the corner to think about things... What numbers can I change to lower the view when the view drops at the dining table? Thanks! __________________ Oberleutnant z. s. Daniel Wolf 87% realism (100%-Cams to watch burning targets, and torpedoes run for fun..) SH5 The Wolves of Steel Megamod- Realnav+Full manual targeting. -no contact updates, no map help. U-50 forever - still a Smiling bastard

09-19-15, 08:51 AM	#460
silentmichal Frogman Join Date: Aug 2011 Location: Poland, my homeland. Posts: 304 Downloads: 241 Uploads: 0	Jasne, proszę //Sure, here you are: https://drive.google.com/file/d/0B2A...ew?usp=sharing __________________ Dining place in Silent Hunter 5? NOW it's possible ! My graphics mod available here: http://www.subsim.com/radioroom/showthread.php?t=200862

09-07-15, 04:17 PM	#458
Jeff-Groves GLOBAL MODDING TERRORIST Join Date: Sep 2014 Posts: 5,654 Downloads: 137 Uploads: 0	Not saying it's easier unless your a Hex Worker like TDW and myself. He went on to work on his master piece program which is fantastic. I still hack the GR2 files with 010 and my exporter. A lot of what I do/did is/was based on the scripts/templates we had for GR2 files using 010.

09-19-15, 04:43 AM	#459
Captain Victor Nub Join Date: Aug 2013 Posts: 2 Downloads: 22 Uploads: 0	Michał, mógłbyś dać dostęp do wersji 1.2.3 swojego moda? Fajne były te skrzynki w centrali, a teraz ich nie ma... Michal, could you please give an access to a 1.2.3 version? These boxes in commander's deck were nice.

09-20-15, 12:05 PM	#461
Captain Victor Nub Join Date: Aug 2013 Posts: 2 Downloads: 22 Uploads: 0	Thanks.

10-04-15, 07:28 PM	#463
Herr Graf Mate Join Date: Mar 2005 Posts: 52 Downloads: 76 Uploads: 0	Well, I was bored so I uninstalled SH5, reinstalled and patched it than decided to use the WoS mod rather than sobers all in one. I started a new Campaign and so far so good.

01-02-16, 09:01 PM	#464
Raven_2012 Commander Join Date: Jan 2010 Location: Elmira, NY Posts: 445 Downloads: 129 Uploads: 0	What do I need to do to get this mod to work with The Wolf of Steel mod Pack?