Ahnenerbe WideGui 1920 x 1080

[THEBERBSTER]

Deleted current campaign captain.

Entered captains name again.

Trying to launch SH3 from the SH3 Commander.

Is there a reason why this error showing below is occurring over and over about 20 times before loading the game to the menu screen.

Error Header >“Silent Hunter 3: sh3.exe entry point not found”

Error Showing > “The procedure entry point Direct3Dcreate9Ex could not be located in the dynamic link library d3d9.dll”

Do the d3d9.dll and the d3d9 that are inside Ahnenerbe WideGui 1920 x 1080 Final mod do these stay with the mod or are they cut and pasted to the main SH3 folder?

Is my mod list enabled correctly?

GWX - 16km Atmosphere
GWX - Alternate Loadscreen - Full Circle < now being over written
GWX - Captain America's Officer Icons < now being over written
GWX - Enhanced Damage Effects
GWX - Integrated Orders < now being over written
GWX - Main movie - 'Das Boot' < now being over written
GWX - No Medals on Crew
GWX - Open Hatch Mod < now being over written
Ahnenerbe WideGui 1920 x 1080 Final <mod folder 1
SH3 Commander < mod folder 2

Removed other mods as per BigWalleye's instructions.

Peter

[BigWalleye]

Originally Posted by THEBERBSTER

Deleted current campaign captain.

Entered captains name again.

Trying to launch SH3 from the SH3 Commander.

Is there a reason why this error showing below is occurring over and over about 20 times before loading the game to the menu screen.

Error Header >“Silent Hunter 3: sh3.exe entry point not found”

Error Showing > “The procedure entry point Direct3Dcreate9Ex could not be located in the dynamic link library d3d9.dll”

Do the d3d9.dll and the d3d9 that are inside Ahnenerbe WideGui 1920 x 1080 Final mod do these stay with the mod or are they cut and pasted to the main SH3 folder?

Is my mod list enabled correctly?

GWX - 16km Atmosphere
GWX - Alternate Loadscreen - Full Circle < now being over written
GWX - Captain America's Officer Icons < now being over written
GWX - Enhanced Damage Effects
GWX - Integrated Orders < now being over written
GWX - Main movie - 'Das Boot' < now being over written
GWX - No Medals on Crew
GWX - Open Hatch Mod < now being over written
Ahnenerbe WideGui 1920 x 1080 Final <mod folder 1
SH3 Commander < mod folder 2

Removed other mods as per BigWalleye's instructions.

Peter

SH3 Commander should be in its own folder on the root. The file SH3Cmdr.exe should not be in any other folder.

Start SH3C. If you haven't already done so, enter the path to your SH3 game folder in SH3 Options/General Settings. Now select New Career and enter your new captain's name, flotilla, and start date in SH3C. THEN start SH3 from SH3C. Enter THE SAME captain's name, flotilla, and start year in SH3. Do not start a career in SH3 before starting it in SH3C.

JSGME should copy d3d9.dll correctly if it is in the mod folder called Ahnenerbe WideGui 1920 x 1080 Final.

I am not sure what you mean by <mod folder 1 and <mod folder 2. You should only have one folder called /MODS and it should be in your SH3 game folder, at the same level as /Data. That is:

<SH3 game folder>
/Data
/MODS
sh3.exe
<SH3C folder>
SH3Cmdr.exe

I hope this helps.


EDIT:

You CAN have a /MODS folder in your SH3C folder, but for now, leave it alone. Work only with the /MODS folder in the SH3 game folder.

[Ahnenerbe]

Originally Posted by BigWalleye

SH3 Commander should be in its own folder on the root. The file SH3Cmdr.exe should not be in any other folder.

Start SH3C. If you haven't already done so, enter the path to your SH3 game folder in SH3 Options/General Settings. Now select New Career and enter your new captain's name, flotilla, and start date in SH3C. THEN start SH3 from SH3C. Enter THE SAME captain's name, flotilla, and start year in SH3. Do not start a career in SH3 before starting it in SH3C.

JSGME should copy d3d9.dll correctly if it is in the mod folder called Ahnenerbe WideGui 1920 x 1080 Final.

I am not sure what you mean by <mod folder 1 and <mod folder 2. You should only have one folder called /MODS and it should be in your SH3 game folder, at the same level as /Data. That is:

<SH3 game folder>
/Data
/MODS
sh3.exe
<SH3C folder>
SH3Cmdr.exe

I hope this helps.


EDIT:

You CAN have a /MODS folder in your SH3C folder, but for now, leave it alone. Work only with the /MODS folder in the SH3 game folder.

BigWalleye, thank you so much for your help, I do not always have the opportunity at the time that any prompt. And the language barrier prevents too little, though and translate using Google translator, but all the same it is necessary to check, because they do not always translate correctly. Thank you again !!
++ Ahnenerbe ++

[THEBERBSTER]

Hi BigWalleye

The zip file Ahnenerbe WideGui 1920 x 1080 Final contains 2 folders.

Folder 1 > Ahnenerbe WideGui 1920 x 1080 Final

Folder 2 > SH3 Commander

Peter

[THEBERBSTER]

Hi Ahnenerbe

My installation is D:\Games\Ubisoft\GWX V3.0 SH3 COMMANDER V3.2

D:\Games\Ubisoft\GWX3 CFG FILES FOR SH3 COMMANDER

D:\Games\Ubisoft\GWX3.0 GOLD

D:\Games\Ubisoft\SilentHunterIII


Where will I find the Directx9 if it is installed?


Windows 7 Home Premium > 64 Bit

I7-860 Processor 2.8Ghz

Gpu EVGA GTX770 > 4 Gig

16 Gig Ram


In the Silent Hunter III folder is the main SH3 Commander folder that has a folder called U-boat in it.

In your SH3 Commander folder there is also a folder called U-boat.

Could you explain please what I need to do next?

Peter

[THEBERBSTER]

Hi guys

I have done a complete reinstallation.

D:\SH3 Silent Hunter III installed in SH3 folder.

D:\SH3C SH3 Commander installed in SH3C folder.


The installation says that I have diretx9.0c installed.

Can someone give me the necessary instructions as I need to know what to do with Anhnenerbe’s ‘SH3 Commander folder’ that contains the ‘U-boat folder’.

Anhnenerbe in his post to me is he telling me to copy his SH3 Commander folder inside the main SH3 Commander folder?

Peter

[Ahnenerbe]

Hi Peter. Copy the folder from the folder SH3 Commander U-boat in his installation, that is, as I understand it, you have a Commander is in the path of the folder D: \ Games \ Ubisoft \ GWX V3.0 SH3 COMMANDER V3.2. Here there and copy. If you will be prompted to replace the files, replace. Everything else described above BigWalleye in your message.
DirectX9 in the you system have installed, that's good, because the game is old, and in any case it will only work with the DirectX9.
And now about the message "The procedure entry point Direct3Dcreate9Ex could not be located in the dynamic link library d3d9.dll" ........ I remember I once said that the NVIDIA GeForce Experience can cause problems with the game, and rather, the mods for a wide format. Check whether you have this function together with the drivers from NVIDIA, or a separate application (if your video card supports NVIDIA). If set, remove or reinstall the driver Uncheck the search for updates. Perhaps you get rid of the message "The procedure entry point Direct3Dcreate9Ex could not be located in the dynamic link library d3d9.dll".
++ Ahnenerbe ++

[Ahnenerbe]

Originally Posted by THEBERBSTER

Deleted current campaign captain.

Entered captains name again.

Trying to launch SH3 from the SH3 Commander.

Is there a reason why this error showing below is occurring over and over about 20 times before loading the game to the menu screen.

Error Header >“Silent Hunter 3: sh3.exe entry point not found”

Error Showing > “The procedure entry point Direct3Dcreate9Ex could not be located in the dynamic link library d3d9.dll”

Do the d3d9.dll and the d3d9 that are inside Ahnenerbe WideGui 1920 x 1080 Final mod do these stay with the mod or are they cut and pasted to the main SH3 folder?

Is my mod list enabled correctly?

GWX - 16km Atmosphere
GWX - Alternate Loadscreen - Full Circle < now being over written
GWX - Captain America's Officer Icons < now being over written
GWX - Enhanced Damage Effects
GWX - Integrated Orders < now being over written
GWX - Main movie - 'Das Boot' < now being over written
GWX - No Medals on Crew
GWX - Open Hatch Mod < now being over written
Ahnenerbe WideGui 1920 x 1080 Final <mod folder 1
SH3 Commander < mod folder 2

Removed other mods as per BigWalleye's instructions.

Peter

Peter, you can not apply those mods which are blocked. Perhaps, only can leave GWX - Open Hatch Mod, but it has to be blocked, the Cameras.dat file (it is blocked) shouldn't affect operability of open hatches.
GWX - Alternate Loadscreen - Full Circle - is present new Loadscreen in mods 1920x1080.
GWX - Captain America's Officer Icons - also is, only with effect of blackout.
GWX - Integrated Orders - Ahnenerbe WideGui 1920 x 1080 Final is also Integrated Orders, only about permission 1920x1080. It isn't necessary to apply twice same.
GWX - Main movie - 'Das Boot' - is present in WideGui the new movie.
You establish in the following order only these mods:
GWX - 16km Atmosphere
GWX - Enhanced Damage Effects
GWX - No Medals on Crew
GWX - Open Hatch Mod (will be blocked)
Ahnenerbe WideGui 1920 x 1080 Final
The SH3 Commander folder you connect with the same name the SH3 Commander folder, in which at you program with SH3Cmdr.exe.If you have renamed it, simply copy all files from my folder in yours if it is necessary to replace something, replace safely. IT ONLY FOR SH3 Commander, not for application through JSGME.
The d3d9.dll and d3d9.ini files don't need to be inserted into the root folder of game manually, JSGME itself will establish everything as it is necessary. Check just in case after installation mods through JSGME presence of these two files at the folder with game, they have to lie where there is sh3.exe.
The procedure entry point Direct3Dcreate9Ex couldn't be located in the dynamic link library d3d9.dll - itself I will ask you some questions......
What operating system at you? Whether directx9 is established? You were correct in the SH3 Commander settings a way to game?
Address, at existence of time and understanding of your problem we will be able to solve it, you shouldn't despair. Good luck!!
++Ahnenerbe++

[jscharpf]

Originally Posted by THEBERBSTER

Deleted current campaign captain.

Entered captains name again.

Trying to launch SH3 from the SH3 Commander.

Is there a reason why this error showing below is occurring over and over about 20 times before loading the game to the menu screen.

Error Header >“Silent Hunter 3: sh3.exe entry point not found”

Error Showing > “The procedure entry point Direct3Dcreate9Ex could not be located in the dynamic link library d3d9.dll”

Do the d3d9.dll and the d3d9 that are inside Ahnenerbe WideGui 1920 x 1080 Final mod do these stay with the mod or are they cut and pasted to the main SH3 folder?

Is my mod list enabled correctly?

GWX - 16km Atmosphere
GWX - Alternate Loadscreen - Full Circle < now being over written
GWX - Captain America's Officer Icons < now being over written
GWX - Enhanced Damage Effects
GWX - Integrated Orders < now being over written
GWX - Main movie - 'Das Boot' < now being over written
GWX - No Medals on Crew
GWX - Open Hatch Mod < now being over written
Ahnenerbe WideGui 1920 x 1080 Final <mod folder 1
SH3 Commander < mod folder 2

Removed other mods as per BigWalleye's instructions.

Peter

Peter that error has been seen be several people including myself. It has something to do with (I think) the NVIDIA experience thing that runs in the background. I'm not 100% sure of this but I googled it and some had fixes..


Regardless, the game will run fine if you just continue to click through the messages. There are about 20 or 30 of the same message with "ding" each time... I'm sorry if that is not a satisfactory answer but I do this every time I launch the game and it works fine!

Jeff