SUBSIM Radio Room Forums



SUBSIM: The Web's #1 resource for all submarine & naval simulations since 1997

Go Back   SUBSIM Radio Room Forums > Modern-Era Subsims > Dangerous Waters
Forget password? Reset here

Reply
 
Thread Tools Display Modes
Old 07-30-14, 03:17 PM   #1
BobbyZero
Mate
 
Join Date: Sep 2006
Location: Croatia
Posts: 57
Downloads: 9
Uploads: 0
Default

There is a solution if you are willing to work with Linux. I'm royally pissed for over a year now because DW doesn't work with Win 8, since that left me without one of my 5 favorite games of all time. So I decided to give it a go on Linux, since I was thinking to experiment with Ubuntu anyway, and see if it's possible to ditch Windows altogether.

I installed Ubuntu 14:04 LTS to dual boot on my Windows 8.1 PC. In Ubuntu, I installed Wine (Windows emulator, you can find it easily and conveniently available in Ubuntu's built-in software center), and then installed DW through Wine. Before doing that I found an old thread here on Subsim forums about DW working in Wine, and the drawback that was emphasized in the post was that there is no sound when DW runs through Wine, and that you need to tamper with sound files in order to get them to work.

Still, I gave it a go, since the mentioned post is 4 years old and Wine has since been updated many times, and lo and behold - the sound files now work without any tampering or problems!

So, if you are screwed by Win 8 as I am, give Ubuntu/Wine combo a shot.

EDIT: I'm talking about DW vanilla with 1.04 patch, I didn't try any mods.
BobbyZero is offline   Reply With Quote
Old 07-31-14, 06:28 AM   #2
Jimbuna
Chief of the Boat
 
Jimbuna's Avatar
 
Join Date: Feb 2006
Location: 250 metres below the surface
Posts: 190,770
Downloads: 63
Uploads: 13


Default

^ Great post
__________________
Wise men speak because they have something to say; Fools because they have to say something.
Oh my God, not again!!

Jimbuna is offline   Reply With Quote
Old 08-13-14, 06:17 AM   #3
ikalugin
Ocean Warrior
 
Join Date: Aug 2014
Location: Moscow, Russia
Posts: 3,212
Downloads: 8
Uploads: 0


Default

I managed to get it working on win 8.1

What did I do?:
- install virtualbox.
- install xp there.
- install guest tools stuff.
- install the steam/dangerous waters.
- set the 3d acceleration on.
- set the few colours mode on for the game. (this allows you to use a proper cursor)

This allows me to run the game, however the 3d models do not work properly (under water objects do not render properly, only sea surface is present, there is no main water body or sea bottom).
ikalugin is offline   Reply With Quote
Old 08-13-14, 05:27 PM   #4
Pisces
Silent Hunter
 
Join Date: Dec 2004
Location: AN9771
Posts: 4,904
Downloads: 304
Uploads: 0
Default

Good for you that it works. But running it in a Windows XP virtual machine does not mean that it works in Windows 8.1. The OS inside the virtual machine is a totally seperate system from the host OS. You made the game run in a simulated pc, that's all. It's still a feat if you get decent performance in it, but it does not solve the Windows 8 incompatibility.
Pisces is offline   Reply With Quote
Old 08-14-14, 04:17 AM   #5
ikalugin
Ocean Warrior
 
Join Date: Aug 2014
Location: Moscow, Russia
Posts: 3,212
Downloads: 8
Uploads: 0


Default

Yes and I still get graphics and performance issues.

Graphics issues:
- in all modes/mods I get the strage morphings of under water objects and general water screw ups. Can be seen on this:
http://steamcommunity.com/sharedfile.../?id=300018025
screenshot.

Performance issues:
- even though I have a modern CPU (with frequency well above the required one) the game appears to run out of the CPU resources for some reason (XP says that 100 percent of the CPU resources are used and game has low FPS).
ikalugin is offline   Reply With Quote
Old 08-14-14, 04:27 AM   #6
ikalugin
Ocean Warrior
 
Join Date: Aug 2014
Location: Moscow, Russia
Posts: 3,212
Downloads: 8
Uploads: 0


Default

Also - it appears to me that AI is not working as intended, Burke failed to intercept any of the sizlers I fired against him (I have fired 4 on the carrier group but they all locked onto one escort)
ikalugin is offline   Reply With Quote
Old 08-14-14, 04:43 AM   #7
Pisces
Silent Hunter
 
Join Date: Dec 2004
Location: AN9771
Posts: 4,904
Downloads: 304
Uploads: 0
Default

Quote:
Originally Posted by ikalugin View Post
Also - it appears to me that AI is not working as intended, Burke failed to intercept any of the sizlers I fired against him (I have fired 4 on the carrier group but they all locked onto one escort)
Have you checked with show truth on? The contact location is only as accurate as your identification of your sensors was, and the tma done on the lines of bearing. What you might have thought was real could have been a sensor ghost or at a wrong range. Also, the missile seeker locks on what it finds in the real world. It doesn't care if it is a carrier or a small tug. Even if you want it to be the Burke.
Pisces is offline   Reply With Quote
Old 08-14-14, 04:34 AM   #8
Pisces
Silent Hunter
 
Join Date: Dec 2004
Location: AN9771
Posts: 4,904
Downloads: 304
Uploads: 0
Default

You might want to investigate if your host CPU has hardware support for virtualization. For Intel it is called Intel VT, for AMD it is AMD-V. You may also need to enable a bios option for this. If the cpu does not have it then it has to be done in software emulation. That obviously takes more resources. Maybe there are some tweaksettings for Virtualbox. But gaming on a virtual machine is often like winning a lottery. Your inching forward might vary.
Pisces is offline   Reply With Quote
Old 10-26-14, 09:53 AM   #9
jaop99
Loader
 
Join Date: Feb 2014
Location: Cancun, Mexico
Posts: 89
Downloads: 26
Uploads: 0
Default

Quote:
Originally Posted by ikalugin View Post
I managed to get it working on win 8.1

What did I do?:
- install virtualbox.
- install xp there.
- install guest tools stuff.
- install the steam/dangerous waters.
- set the 3d acceleration on.
- set the few colours mode on for the game. (this allows you to use a proper cursor)

This allows me to run the game, however the 3d models do not work properly (under water objects do not render properly, only sea surface is present, there is no main water body or sea bottom).
Hi Ikalugin, if you want to see the underwater objects in 3D in your VM machine or VB, have to uncheck in the game avanced 3D options: BLEND TEXTURES (then you will see the sea floor) and CAUSTIC EFFECTS (then you will see the 3D objects)

Hope it works for your VB
jaop99 is offline   Reply With Quote
Reply


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 01:33 AM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Copyright © 1995- 2025 Subsim®
"Subsim" is a registered trademark, all rights reserved.