[REL] CSP Magui Interface for SH5

DrJones · 12-09-12, 10:04 AM

Quote:

Originally Posted by gap

Thank you for your fast replies!
Too bad German is not among the languages I can speak, but you gave me the right motivation to gain a first insight into it

Nonetheless, I think you forgot to answer my first two questions:

so, the Entfernung abstecken should be the "compass", isn't it?

Here i think it is the ruler

"Expand tools" => expanding or magnifying the tool selection tab
"Advanced tools" => toggling advanced tools

Advanced Tools is the correct one

There is not hurry, but as soon as you will answer them, and tell me the difference between Steuerungs Instrumente fixieren and Steuerungsanzeige fixieren, I will be able to send you the italian menu.txt

i can not find the difference right now on my own...

Steuerungs Instrumente fixieren is ment here...

The answers are to find inline

DrJones

flostt · 12-09-12, 11:01 AM

Here you may find the english test version of the menu.txt:

http://www31.zippyshare.com/v/66398519/file.html

YOU CAN INSTALL WITH JSGME....

If you see any errors, please post them or send a PM, I will collect these and correct them; I'm sure Dr.Jones will incorporate the different languages in his next release....

I did not really have time to test in detail, but have noticed the following:

- Messages : I was able to increase / decrease size of window, but could not anchor it (mousing over the button shows "toggle".... entry line 6205 ?)
- I was unable to open the Time / Bearing Chart as shown in your screenshots
- I was able to lock the right console, but could not unlock it. ( expanding / closing the top of the right console worked fine)
- I could not open the advanced tools in the tool bar

flostt · 12-09-12, 11:03 AM

DrJones,

That is a great piece of art developing here, I enjoyed the few minutes looking into it during the testing of the menu.txt ...

volodya61 · 12-09-12, 01:33 PM

Quote:

Originally Posted by flostt

Here you may find the english test version of the menu.txt...

OK.. thanks..

But why test version?

gap · 12-09-12, 02:02 PM

Quote:

Originally Posted by DrJones

Updated Scrrenshots in Post 1

Quote:

Originally Posted by flostt

DrJones,

That is a great piece of art developing here, I enjoyed the few minutes looking into it during the testing of the menu.txt ...

I agree: this mod is a little masterwork.

Quote:

Originally Posted by flostt

Here you may find the english test version of the menu.txt

Well done flostt

Quote:

Originally Posted by DrJones

The answers are to find inline

DrJones

Thank you DrJones, with this last piece of information, and after confrontation with the english version by flostt, the italian version will follow shortly

DrJones · 12-09-12, 02:31 PM

Quote:

Originally Posted by gap

I agree: this mod is a little masterwork.

Well done flostt

Thank you DrJones, with this last piece of information, and after confrontation with the english version by flostt, the italian version will follow shortly

Thank you very much...

Best Regards

DrJones

drifter63 · 12-10-12, 04:21 PM

The game is 1.2 if I put CSP Maqui v3 with just the stock game no mods it loads to the main screen ok but when I go to exit the game it says exit and back together and I can't exit the game? no missions work either I hope I can get this great mod working.

DrJones · 12-10-12, 04:27 PM

Quote:

Originally Posted by drifter63

The game is 1.2 if I put CSP Maqui v3 with just the stock game no mods it loads to the main screen ok but when I go to exit the game it says exit and back together and I can't exit the game? no missions work either I hope I can get this great mod working.

Hey Mate,

thanks for you response. I don't really know why the game doing so...mybe here is the problem wich often posted here.

Is this a new clean installation of sh5 or have you still used some other mods before....

flostt · 12-09-12, 02:10 PM

Quote:

Originally Posted by volodya61

OK.. thanks..

But why test version?

basically just waiting if everyone feels comfortable with the used wording.

I also noticed some actions not working, so if DrJones does an update on the german file I will modify the english one.....

Lewis Wingerter · 12-09-12, 02:43 PM

Hi Drjones Your CSPMI 2.0 beta works great. I am using it with OH2. I downloaded CPMI 3.0 and cant get it to work. When I load it up and try to go to the bunker The sound and video bog down like it stuck in a loop. The mouse has guite await in movement and when it move it jump. I tried both file of CSPMI3.0 that you had posted on your post one and both does the same. From reading the other post it appears that I an the only one having this problem at this time. Thanks in advance for any help.
Keep up the great work

LW

DrJones · 12-09-12, 03:19 PM

Quote:

Originally Posted by Lewis Wingerter

Hi Drjones Your CSPMI 2.0 beta works great. I am using it with OH2. I downloaded CPMI 3.0 and cant get it to work. When I load it up and try to go to the bunker The sound and video bog down like it stuck in a loop. The mouse has guite await in movement and when it move it jump. I tried both file of CSPMI3.0 that you had posted on your post one and both does the same. From reading the other post it appears that I an the only one having this problem at this time. Thanks in advance for any help.
Keep up the great work

LW

#

Hey Mate,

that sounds interesting.

can you post the mods and their order you are using?

Thank you

Best Regards

DrJones

Lewis Wingerter · 12-09-12, 08:37 PM

Quote:

Originally Posted by DrJones

#

Hey Mate,

that sounds interesting.

can you post the mods and their order you are using?

Thank you

Best Regards

DrJones

Hi DrJones. Here my mod list I hope this will help

IRAI 0037
OH Full V2
TDW mines subnet detectible in hydro OH v2
radio messages 1-2-0 german voice
radio messages 1-2-0 non new UI stock
part magul v3.0
part magul v 3.0 eng text ver
gap mano scope reduced lt zeiss
advance shift key 2.1
dbsm music 1-0-4
realistic ammo amount for aa &deck gun
remove logo intro tdw

DrJones · 12-09-12, 02:30 PM

Quote:

Originally Posted by flostt

Here you may find the english test version of the menu.txt:

http://www31.zippyshare.com/v/66398519/file.html

YOU CAN INSTALL WITH JSGME....

If you see any errors, please post them or send a PM, I will collect these and correct them; I'm sure Dr.Jones will incorporate the different languages in his next release....

I did not really have time to test in detail, but have noticed the following:

- Messages : I was able to increase / decrease size of window, but could not anchor it (mousing over the button shows "toggle".... entry line 6205 ?)
- I was unable to open the Time / Bearing Chart as shown in your screenshots
- I was able to lock the right console, but could not unlock it. ( expanding / closing the top of the right console worked fine)
- I could not open the advanced tools in the tool bar

Hey Mate

Thank you very much for your good work. Yes you are right. There will be some updates coming soon.

So the Menu text should be updated also sometimes

Here a screnn for the asked issues.

Sometimes to toggle the anchor for the right console is a little tricky. Sometimes you have to click some more times on the lower left screw in the right console.
The Console wont move out ov sight if you have opened an suborder menu. Close it an try again.
i have marked an area in the right side of the messagebox. there is an area to click in to toggle the anchor for the messagebox.

The charts can only be called on the navigation map how i showed in the screenshot.

Hope that helps so far

Best Regards

DrJones

12-09-12, 11:01 AM	#2
flostt Sonar Guy Join Date: Sep 2010 Location: Switzerland Posts: 388 Downloads: 86 Uploads: 0	English menu.txt Here you may find the english test version of the menu.txt: http://www31.zippyshare.com/v/66398519/file.html YOU CAN INSTALL WITH JSGME.... If you see any errors, please post them or send a PM, I will collect these and correct them; I'm sure Dr.Jones will incorporate the different languages in his next release.... I did not really have time to test in detail, but have noticed the following: - Messages : I was able to increase / decrease size of window, but could not anchor it (mousing over the button shows "toggle".... entry line 6205 ?) - I was unable to open the Time / Bearing Chart as shown in your screenshots - I was able to lock the right console, but could not unlock it. ( expanding / closing the top of the right console worked fine) - I could not open the advanced tools in the tool bar __________________ Von den 40'000 deutschen U-Boot-Männern des Zweiten Weltkrieges kehrten 30'000 nicht zurück... 40’000 German sailors served on U-boats during World War II – 30’000 never returned home...

12-09-12, 11:03 AM	#3
flostt Sonar Guy Join Date: Sep 2010 Location: Switzerland Posts: 388 Downloads: 86 Uploads: 0	DrJones, That is a great piece of art developing here, I enjoyed the few minutes looking into it during the testing of the menu.txt ... __________________ Von den 40'000 deutschen U-Boot-Männern des Zweiten Weltkrieges kehrten 30'000 nicht zurück... 40’000 German sailors served on U-boats during World War II – 30’000 never returned home...

12-10-12, 04:21 PM	#7
drifter63 Sailor man Join Date: Jul 2009 Location: Neosho Wisconsin USA Posts: 45 Downloads: 518 Uploads: 0	CTD The game is 1.2 if I put CSP Maqui v3 with just the stock game no mods it loads to the main screen ok but when I go to exit the game it says exit and back together and I can't exit the game? no missions work either I hope I can get this great mod working.

12-09-12, 02:43 PM	#10
Lewis Wingerter Planesman Join Date: Jul 2007 Location: Moline IL Posts: 181 Downloads: 282 Uploads: 0	3.0 not working Hi Drjones Your CSPMI 2.0 beta works great. I am using it with OH2. I downloaded CPMI 3.0 and cant get it to work. When I load it up and try to go to the bunker The sound and video bog down like it stuck in a loop. The mouse has guite await in movement and when it move it jump. I tried both file of CSPMI3.0 that you had posted on your post one and both does the same. From reading the other post it appears that I an the only one having this problem at this time. Thanks in advance for any help. Keep up the great work LW