[TEC] SH5.exe patches to fix bugs and add functionality - Page 49

TheBeast · 08-04-12, 04:40 PM

I think Storm Condition should be considered for Decks A wash. Stormy weather should prevent running at 7.5m

Remember (Rigging boat for Decks A wash) data\Sound\Speech\ChiefEngineer\Normal\MC_CR_CHIEF _04.ogg

volodya61 · 08-04-12, 05:11 PM

It works fine and has a good view

THE_MASK · 08-04-12, 05:53 PM

I like 8 mts . Thankyou for this mod .

Dogfish40 · 08-05-12, 09:39 AM

Hi TDW. Wondering? I looked to see if this was mentioned since the release.
Did we find that adjustment to keep the hatch open with decks awash but to close it while diving?

Can't wait to load this. OH, I guess I could find this out on my own but for the sake of anyone else who may want to know; when we run decks awash, is it deep enough for a hydrophone check??

Thanks Loads for these, I can't tell you how much they improve this...

PS: Is there a hotkey for the Decks Awash order, or do we specifically order 7.5m depth

D40

volodya61 · 08-05-12, 10:11 AM

Quote:

Originally Posted by Dogfish40

..when we run decks awash, is it deep enough for a hydrophone check??..

No.. it's not enough deep to start hydrophone check..

Quote:

Originally Posted by Dogfish40

.. Is there a hotkey for the Decks Awash order, or do we specifically order 7.5m depth..

Not yet..

TheDarkWraith · 08-05-12, 10:15 AM

Quote:

Originally Posted by Dogfish40

Hi TDW. Wondering? I looked to see if this was mentioned since the release.
Did we find that adjustment to keep the hatch open with decks awash but to close it while diving?

Works just like it's supposed to - hatch will not lock closed during decks awash (iirc it does close when a new depth is ordered though) so you can reopen it. When diving it will lock closed so it cannot be opened.

Dogfish40 · 08-05-12, 01:13 PM

Quote:

Originally Posted by TheDarkWraith

Works just like it's supposed to - hatch will not lock closed during decks awash (iirc it does close when a new depth is ordered though) so you can reopen it. When diving it will lock closed so it cannot be opened.

Great!

So cool.
Now, Do I just order 7.5 depth? As volodya says, no hotkey yet, right?

Thanks
D40

TheDarkWraith · 08-05-12, 01:23 PM

Quote:

Originally Posted by Dogfish40

Great!

So cool.
Now, Do I just order 7.5 depth? As volodya says, no hotkey yet, right?

Thanks
D40

Yep, just order some depth <= 7.5m. I can't make a hotkey for it until I figure out how to add new commands to the exe

I will be able to add a new icon to the depth bar in my UIs mod though that will order decks awash

OFFTOPIC:

For those of you who own a GTX690 and have Win7 Ultimate 64bit DO NOT INSTALL EVGA's LED controller! It will cause your system to ALWAYS reboot the first time it tries. Now I have to reinstall Win7 because removing the software doesn't remove the problem. It leaves behind some files!! This really pisses me off....

OFFTOPIC EDIT:

Problem was due to old BIOS! Stranger things have happended before. Upgraded the Crosshair V BIOS from 0404 to 1402 and no more problems.

Mikemike47 · 08-06-12, 04:55 PM

Quote:

Originally Posted by TheDarkWraith

OFFTOPIC:

For those of you who own a GTX690 and have Win7 Ultimate 64bit DO NOT INSTALL EVGA's LED controller! It will cause your system to ALWAYS reboot the first time it tries. Now I have to reinstall Win7 because removing the software doesn't remove the problem. It leaves behind some files!! This really pisses me off....

OFFTOPIC EDIT:

Problem was due to old BIOS! Stranger things have happended before. Upgraded the Crosshair V BIOS from 0404 to 1402 and no more problems.

I was always curious if a company allowed you to update graphics BIOS. I never made it my highest priority or did not dig deep enough on ATI forum sites. Has anyone found a link on how to update BIOS, and the download file link to update BIOS on an ATI 4670 video graphics card or similar?

TheDarkWraith · 08-06-12, 06:24 PM

Quote:

Originally Posted by Mikemike47

I was always curious if a company allowed you to update graphics BIOS. I never made it my highest priority or did not dig deep enough on ATI forum sites. Has anyone found a link on how to update BIOS, and the download file link to update BIOS on an ATI 4670 video graphics card or similar?

\

I didn't update the video card BIOS, I updated my motherboard BIOS

TheDarkWraith · 08-06-12, 10:27 PM

Been working dilligently on my next work of art - AI crew damage control

I have code in place that will cause the AI to start pumping out water from damaged zones (boxes)

I'm working on the code that will have them putting shoring and patching in place (to fix the damage). Even though the AI crew will patch and shore and pump out the flooding they will not regain the HPs lost from the unit. Those are gone forever. They will regain the HPs to the zone (box) though.

If a zone (box) has > 50% flooding:
- if less than 65% flooded and zone (box) damage is > 25% then they will let it flood completely (but they seal it off from other compartments).
- if less than 65% flooded and zone (box) damage is <= 25% then they will continue to try pumping out the water
- if >= 65% flooding then crew abandons pumping and will let it flood completely (but they seal it off from other compartments).

You can actually watch a unit rise out of the water (or recover from listing) from the AI crew pumping out the water

This will be a first for any of the Silent Hunter series

08-07-12, 12:00 AM

Is there someone who have tried to patch the steam version?

Sartoris · 08-07-12, 02:27 AM

Great news, TDW! Absolutely spectacular progress!

Yesterday I used your latest patcher, and it works perfectly, so I'm wondering if we will have to first disable all of the patches before applying the new one (once it comes out)? I know it says so on the first page, but just checking.

volodya61 · 08-07-12, 07:32 AM

Quote:

Originally Posted by TheDarkWraith

Been working dilligently on my next work of art - AI crew damage control

I have code in place that will cause the AI to start pumping out water from damaged zones (boxes)

I'm working on the code that will have them putting shoring and patching in place (to fix the damage). Even though the AI crew will patch and shore and pump out the flooding they will not regain the HPs lost from the unit. Those are gone forever. They will regain the HPs to the zone (box) though...

Your work approaches this game to reality more and more! And I think eventually will make it the best in the Silent Hunter series!

Quote:

Originally Posted by Deke

Is there someone who have tried to patch the steam version?

Unfortunately it's impossible..

gap · 08-07-12, 08:30 AM

Outstanding work, TDW

08-04-12, 04:40 PM	#721
TheBeast The Old Man Join Date: Jan 2010 Location: Lynnwood, WA Posts: 1,533 Downloads: 886 Uploads: 23	I think Storm Condition should be considered for Decks A wash. Stormy weather should prevent running at 7.5m Remember (Rigging boat for Decks A wash) data\Sound\Speech\ChiefEngineer\Normal\MC_CR_CHIEF _04.ogg __________________ Fear me! I am, TheBeastBelow SHIV-MediaFire \| SHV-MediaFire

08-04-12, 05:11 PM	#722
volodya61 Ocean Warrior Join Date: Feb 2012 Location: Rostov-on-Don, local time GMT+4 Posts: 3,300 Downloads: 374 Uploads: 0	It works fine and has a good view __________________ . Where does human stupidity end? . *El sueño de la razón produce monstruos © - and for some people awakening will be cruel*

08-05-12, 09:39 AM	#724
Dogfish40 Ace of the Deep Join Date: Sep 2010 Location: LA Area, Central coast, California Posts: 1,023 Downloads: 827 Uploads: 0	Hi TDW. Wondering? I looked to see if this was mentioned since the release. Did we find that adjustment to keep the hatch open with decks awash but to close it while diving? Can't wait to load this. OH, I guess I could find this out on my own but for the sake of anyone else who may want to know; when we run decks awash, is it deep enough for a hydrophone check?? Thanks Loads for these, I can't tell you how much they improve this... PS: Is there a hotkey for the Decks Awash order, or do we specifically order 7.5m depth D40 __________________ *Dogfish40*

08-04-12, 05:53 PM	#723
THE_MASK Ace of the deep . Join Date: Jan 2006 Posts: 9,226 Downloads: 901 Uploads: 73	I like 8 mts . Thankyou for this mod .

08-06-12, 10:27 PM	#731
TheDarkWraith Black Magic Join Date: Jun 2007 Posts: 11,962 Downloads: 147 Uploads: 5	Been working dilligently on my next work of art - AI crew damage control I have code in place that will cause the AI to start pumping out water from damaged zones (boxes) I'm working on the code that will have them putting shoring and patching in place (to fix the damage). Even though the AI crew will patch and shore and pump out the flooding they will not regain the HPs lost from the unit. Those are gone forever. They will regain the HPs to the zone (box) though. If a zone (box) has > 50% flooding: - if less than 65% flooded and zone (box) damage is > 25% then they will let it flood completely (but they seal it off from other compartments). - if less than 65% flooded and zone (box) damage is <= 25% then they will continue to try pumping out the water - if >= 65% flooding then crew abandons pumping and will let it flood completely (but they seal it off from other compartments). You can actually watch a unit rise out of the water (or recover from listing) from the AI crew pumping out the water This will be a first for any of the Silent Hunter series

08-07-12, 12:00 AM	#732
Deke Stowaway Posts: n/a Downloads: Uploads:	Is there someone who have tried to patch the steam version?

08-07-12, 02:27 AM	#733
Sartoris Captain Join Date: May 2011 Posts: 489 Downloads: 106 Uploads: 0	Great news, TDW! Absolutely spectacular progress! Yesterday I used your latest patcher, and it works perfectly, so I'm wondering if we will have to first disable all of the patches before applying the new one (once it comes out)? I know it says so on the first page, but just checking.

08-07-12, 08:30 AM	#735
gap Navy Seal Join Date: Jan 2011 Location: CJ8937 Posts: 8,215 Downloads: 793 Uploads: 10	Outstanding work, TDW