[WIP]SKIN: SH5 Tarnmatte Anechoic Coating - Page 9

Sepp von Ch. · 03-15-11, 04:47 PM

Thanks Kapitän TheBeast!

Can I use this skin "theSKIN_SH5_Typ-VIIC_Panther" for my VIIC/41 U-Boot too or it is only for VIIC?

TheBeast · 03-15-11, 04:56 PM

Quote:

Originally Posted by Josef von Posorschitz

Thanks Kapitän TheBeast!

Can I use this skin "theSKIN_SH5_Typ-VIIC_Panther" for my VIIC/41 U-Boot too or it is only for VIIC?

Yes, just rename MOD files as needed.

Data\Textures\TNormal\tex

Dondu · 11-09-11, 03:32 AM

Your mod is very beautiful. Thank you very much.

NZsnowman · 11-10-11, 02:16 PM

I am not sure how important this is but I noted that the Alberich texture and the Free-Flooding Vent Patterns is incorrect. I can provide you some correct drawings of both if you want them.

Simon

TheBeast · 11-10-11, 06:01 PM

Quote:

Originally Posted by NZsnowman

I am not sure how important this is but I noted that the Alberich texture and the Free-Flooding Vent Patterns is incorrect. I can provide you some correct drawings of both if you want them.

Simon

Yes, Reference material is always appreciated.

Regards
TheBeast

NZsnowman · 11-10-11, 06:35 PM

You can see my drawing of the Alberich tile here: http://en.wikipedia.org/wiki/Anechoic_tile

Free-Flooding Vent Patterns

Free-Flooding Vent Patterns for U-1105, U-1106, U-1107, U-1304, U-1306 and U-1308 (or Type VIIC/41's with the Alberich coating).

Below are the Free-Flooding vent patterns for the U-boats above. The vent patterns are base on photographs of U-1105. In the images below, they display the standard Free-Flooding vent patterns for a Type VIIC’s (bottom drawings) and the new layout for boats with the Alberich coating (top drawings). The German’s made the vents bigger, and had fewer of them for boats with Alberich coating.

Stern Vents

Bow Vents

Diesel air inlet vents on the main bridge casting.

Fig. 1. The standard diesel air inlet vents on the main bridge casting for Type VIIC/41’s.

Fig. 2. The shape and size of the diesel air inlet vents on the main bridge casting for Type VIIC/41’s with the Alberich coating.

If you need any more information on this let me know, happy to help.

Simon

TheBeast · 11-11-11, 04:47 AM

Thank you for this great refference material.

Quote:

Originally Posted by NZsnowman

You can see my drawing of the Alberich tile here: http://en.wikipedia.org/wiki/Anechoic_tile

Free-Flooding Vent Patterns

Free-Flooding Vent Patterns for U-1105, U-1106, U-1107, U-1304, U-1306 and U-1308 (or Type VIIC/41's with the Alberich coating).

The Skin is for a Type VIIC. I know there are a few differences between VIIC and VIIC/41.
I will see what can be done when making a VIIC/41 Skin.

Quote:

Below are the Free-Flooding vent patterns for the U-boats above. The vent patterns are base on photographs of U-1105. In the images below, they display the standard Free-Flooding vent patterns for a Type VIIC’s (bottom drawings) and the new layout for boats with the Alberich coating (top drawings). The German’s made the vents bigger, and had fewer of them for boats with Alberich coating.

Stern Vents

Bow Vents

The Side Structure Free-Flooding Vent Holes are actually part of the 3D Model, I do not paint these holes in place. I am unable to move them but I can Paint additional holes.

Quote:

Diesel air inlet vents on the main bridge casting.

Fig. 1. The standard diesel air inlet vents on the main bridge casting for Type VIIC/41’s.

Fig. 2. The shape and size of the diesel air inlet vents on the main bridge casting for Type VIIC/41’s with the Alberich coating.

If you need any more information on this let me know, happy to help.

Simon

Pretty sure diesel air inlets are just painted and bump mapped. Moving changing these would be easy.

Regards!
TheBeast

silversurfer · 01-16-12, 08:37 AM

This looks good. Thanks for uploading

Herr-Berbunch · 01-27-12, 10:37 AM

I'm struggling to find this with the link - I get an invalid file ID message.

Can anybody help, please?

Punch · 01-29-12, 06:26 AM

Quote:

Originally Posted by Herr-Berbunch

I'm struggling to find this with the link - I get an invalid file ID message.

Can anybody help, please?

Me to

Commander Mysenses · 01-29-12, 08:48 AM

its part of TheBeasts equipment upgrade mod.

Herr-Berbunch · 01-29-12, 01:17 PM

Thanks for that

This skin looked too good to just disappear.

TheBeast · 08-25-12, 10:33 AM

Re-Uploaded this Skin

See Post #1 for more info.

Magic1111 · 08-26-12, 04:52 AM

Quote:

Originally Posted by TheBeast

Re-Uploaded this Skin

See Post #1 for more info.

Many thx Beast!!!

Best regards,
Magic

Tomek4494 · 05-22-21, 06:27 AM

Quote:

Originally Posted by TheBeast

Can somebody reupload this Alberich skin? I can't find it anywhere

03-15-11, 04:47 PM	#121
Sepp von Ch. Sea Lord Join Date: Dec 2009 Location: In my U-552 and Tiger Posts: 1,732 Downloads: 788 Uploads: 0	Thanks Kapitän TheBeast! Can I use this skin "theSKIN_SH5_Typ-VIIC_Panther" for my VIIC/41 U-Boot too or it is only for VIIC? __________________ *U-552* *Tiger* *IDF*

01-27-12, 10:37 AM	#129
Herr-Berbunch Kaiser Bill's batman Join Date: May 2010 Location: AN72 Posts: 13,203 Downloads: 76 Uploads: 0	I'm struggling to find this with the link - I get an invalid file ID message. Can anybody help, please? __________________

01-29-12, 01:17 PM	#132
Herr-Berbunch Kaiser Bill's batman Join Date: May 2010 Location: AN72 Posts: 13,203 Downloads: 76 Uploads: 0	Thanks for that This skin looked too good to just disappear. __________________

08-25-12, 10:33 AM	#133
TheBeast The Old Man Join Date: Jan 2010 Location: Lynnwood, WA Posts: 1,533 Downloads: 886 Uploads: 23	Re-Uploaded this Skin See Post #1 for more info. __________________ Fear me! I am, TheBeastBelow SHIV-MediaFire \| SHV-MediaFire

11-09-11, 03:32 AM	#123
Dondu Nub Join Date: Jul 2008 Posts: 2 Downloads: 50 Uploads: 0	Your mod is very beautiful. Thank you very much.

11-10-11, 02:16 PM	#124
NZsnowman Machinist's Mate Join Date: Mar 2005 Location: New Zealand Posts: 127 Downloads: 6 Uploads: 0	I am not sure how important this is but I noted that the Alberich texture and the Free-Flooding Vent Patterns is incorrect. I can provide you some correct drawings of both if you want them. Simon

11-10-11, 06:35 PM	#126
NZsnowman Machinist's Mate Join Date: Mar 2005 Location: New Zealand Posts: 127 Downloads: 6 Uploads: 0	You can see my drawing of the Alberich tile here: http://en.wikipedia.org/wiki/Anechoic_tile Free-Flooding Vent Patterns Free-Flooding Vent Patterns for U-1105, U-1106, U-1107, U-1304, U-1306 and U-1308 (or Type VIIC/41's with the Alberich coating). Below are the Free-Flooding vent patterns for the U-boats above. The vent patterns are base on photographs of U-1105. In the images below, they display the standard Free-Flooding vent patterns for a Type VIIC’s (bottom drawings) and the new layout for boats with the Alberich coating (top drawings). The German’s made the vents bigger, and had fewer of them for boats with Alberich coating. Stern Vents Bow Vents Diesel air inlet vents on the main bridge casting. Fig. 1. The standard diesel air inlet vents on the main bridge casting for Type VIIC/41’s. Fig. 2. The shape and size of the diesel air inlet vents on the main bridge casting for Type VIIC/41’s with the Alberich coating. If you need any more information on this let me know, happy to help. Simon

01-16-12, 08:37 AM	#128
silversurfer Seaman Join Date: Aug 2007 Location: Cornwall UK Posts: 38 Downloads: 70 Uploads: 0	This looks good. Thanks for uploading

01-29-12, 08:48 AM	#131
Commander Mysenses Navy Dude Join Date: Oct 2011 Location: AM98 - Rounding Hartland Point and sneaking up the Bristol Channel Posts: 173 Downloads: 137 Uploads: 0	its part of TheBeasts equipment upgrade mod.