Can't get a career to start ...

HW3 · 10-04-11, 08:40 PM

Once the load bar finishes, and the screen goes black, it will still take a minute or two for the sim to finish loading.

von Kinderei · 10-04-11, 08:51 PM

Trust me it's not loadin' at all

And as I stated when I first loaded the sim I had to put in the verification code that came with the game ... I have since re-installed the stupid thing because I had problems with SH3 Commander not loadin' a career and I was gettin' a error message ( something to do with a sh.exe and a kernell.dll error )

Whenever I re-installed the game I have not had to re-enter the verification code that came with the game ... not sure why

Anyways this has been a pain in the arse

von Kinderei · 10-04-11, 09:04 PM

This was the error I was gettin' when I tried to start a career via SH3 Commander

The error report is : Appname: SH3.exe Appver: 1.4.0.1 Modname: kernell.dll

frau kaleun · 10-04-11, 09:22 PM

IIRC, kernel.dll errors are usually indicative of RAM issues... what are your specs and what other mods are you running (if any)?

von Kinderei · 10-04-11, 09:36 PM

My system specs are : Q9550 Core 2 Quad, 2g RAM, SoundBlaster X-Fi, ASUS P5N-D

I am tryin' to run the GWX 3.0 gold only and SH3 Commander but neither wanna work

HW3 · 10-04-11, 09:51 PM

Quote:

Whenever I re-installed the game I have not had to re-enter the verification code that came with the game ... not sure why

The code is still in your registry. Removing SH3 does not clean everything out. To get everything you need to clean the registry too.

von Kinderei · 10-05-11, 07:02 AM

Quote:

Originally Posted by HW3

The code is still in your registry. Removing SH3 does not clean everything out. To get everything you need to clean the registry too.

How do I do that ?

I know how to et into the registry but what am I lookin' for when I get in there ?

10-04-11, 09:48 PM

No idea if these will solve the problem you're having, but they're worth a shot.

If using Steam:

It sounds simple, and you've probably already done so, but have you gone into your "Steam/steamapps/common" folder, and checked to see if the "Silent Hunter 3" folder was still there? (Even after Steam was supposed to have deleted it.) I find that most of the time Steam doesn't get rid of everything if mods left any junk behind. Afterwards, you can have Steam install the game again, and then install GWX and any other mods. (See the next suggestion before installing mods.)
After installing SH3 on Steam, and before installing any mods, try right-clicking "Silent Hunter III" on the game list, and choosing "Properties". Click the "Local Files" tab, and then click "Verify integrity of game cache". (Just to double-check if it was downloaded properly.

General advice:

Also check the "My Documents" folder, and if you don't care about your past save data, delete/recycle the "SH3" folder.
If you've recently updated your graphics drivers, it might be worth a shot trying the previous version. If you have not updated lately, it probably wouldn't hurt to try updating.
If you're using SH3 Commander with GWX, remember to install the GWX config files for it.

soopaman2 · 10-05-11, 12:08 PM

Quote:

Originally Posted by Hans Uberman

No idea if these will solve the problem you're having, but they're worth a shot.

If using Steam:

It sounds simple, and you've probably already done so, but have you gone into your "Steam/steamapps/common" folder, and checked to see if the "Silent Hunter 3" folder was still there? (Even after Steam was supposed to have deleted it.) I find that most of the time Steam doesn't get rid of everything if mods left any junk behind. Afterwards, you can have Steam install the game again, and then install GWX and any other mods. (See the next suggestion before installing mods.)
After installing SH3 on Steam, and before installing any mods, try right-clicking "Silent Hunter III" on the game list, and choosing "Properties". Click the "Local Files" tab, and then click "Verify integrity of game cache". (Just to double-check if it was downloaded properly.

General advice:

Also check the "My Documents" folder, and if you don't care about your past save data, delete/recycle the "SH3" folder.
If you've recently updated your graphics drivers, it might be worth a shot trying the previous version. If you have not updated lately, it probably wouldn't hurt to try updating.
If you're using SH3 Commander with GWX, remember to install the GWX config files for it.

I fought myself. Hans the uberman hit it dead on.
When you install mods and things like jsgme, when steam deletes it only deletes the native files. The MODS folder will still be in there along with fragments of other mods. Delete the SH3 folder, then reinstall.

Seriously do what that fine gentleman said, I had to find this crap out through trial and error, and wish I had read the above quoted post a week ago!

von Kinderei · 10-05-11, 01:06 PM

I don't use SHIII with STEAM so thats not the problem

I went in the registry and deleted the SHIII file there and then I re-installed and everything went well ... so I then slowly added MODS via JSGME and low and behold the culprit of my problem was the Merchant Fleet Mod

Why would this be the problem with my careers not starting

10-04-11, 08:40 PM	#1
HW3 Navy Seal Join Date: Apr 2005 Location: Gresham Oregon Posts: 6,576 Downloads: 458 Uploads: 0	Once the load bar finishes, and the screen goes black, it will still take a minute or two for the sim to finish loading. __________________ "Some ships are designed to sink...others require our assistance." Nathan Zelk

10-04-11, 08:51 PM	#2
von Kinderei Ocean Warrior Join Date: Dec 2007 Location: Virginia Posts: 2,606 Downloads: 150 Uploads: 0	Trust me it's not loadin' at all And as I stated when I first loaded the sim I had to put in the verification code that came with the game ... I have since re-installed the stupid thing because I had problems with SH3 Commander not loadin' a career and I was gettin' a error message ( something to do with a sh.exe and a kernell.dll error ) Whenever I re-installed the game I have not had to re-enter the verification code that came with the game ... not sure why Anyways this has been a pain in the arse __________________ vK

10-04-11, 09:04 PM	#3
von Kinderei Ocean Warrior Join Date: Dec 2007 Location: Virginia Posts: 2,606 Downloads: 150 Uploads: 0	This was the error I was gettin' when I tried to start a career via SH3 Commander The error report is : Appname: SH3.exe Appver: 1.4.0.1 Modname: kernell.dll __________________ vK

10-04-11, 09:36 PM	#5
von Kinderei Ocean Warrior Join Date: Dec 2007 Location: Virginia Posts: 2,606 Downloads: 150 Uploads: 0	My system specs are : Q9550 Core 2 Quad, 2g RAM, SoundBlaster X-Fi, ASUS P5N-D I am tryin' to run the GWX 3.0 gold only and SH3 Commander but neither wanna work __________________ vK

10-04-11, 09:48 PM	#8
Hans Uberman Stowaway Posts: n/a Downloads: Uploads:	No idea if these will solve the problem you're having, but they're worth a shot. If using Steam: It sounds simple, and you've probably already done so, but have you gone into your "Steam/steamapps/common" folder, and checked to see if the "Silent Hunter 3" folder was still there? (Even after Steam was supposed to have deleted it.) I find that most of the time Steam doesn't get rid of everything if mods left any junk behind. Afterwards, you can have Steam install the game again, and then install GWX and any other mods. (See the next suggestion before installing mods.) After installing SH3 on Steam, and before installing any mods, try right-clicking "Silent Hunter III" on the game list, and choosing "Properties". Click the "Local Files" tab, and then click "Verify integrity of game cache". (Just to double-check if it was downloaded properly. General advice: Also check the "My Documents" folder, and if you don't care about your past save data, delete/recycle the "SH3" folder. If you've recently updated your graphics drivers, it might be worth a shot trying the previous version. If you have not updated lately, it probably wouldn't hurt to try updating. If you're using SH3 Commander with GWX, remember to install the GWX config files for it.

10-04-11, 09:22 PM	#4
frau kaleun Rear Admiral Join Date: Nov 2009 Location: Skyri--oh who are we kidding, I'm probably at Lowe's. Again. Posts: 12,706 Downloads: 168 Uploads: 0	IIRC, kernel.dll errors are usually indicative of RAM issues... what are your specs and what other mods are you running (if any)?

10-05-11, 01:06 PM	#10
von Kinderei Ocean Warrior Join Date: Dec 2007 Location: Virginia Posts: 2,606 Downloads: 150 Uploads: 0	I don't use SHIII with STEAM so thats not the problem I went in the registry and deleted the SHIII file there and then I re-installed and everything went well ... so I then slowly added MODS via JSGME and low and behold the culprit of my problem was the Merchant Fleet Mod Why would this be the problem with my careers not starting __________________ vK