Forgive me, but here is another dumb question.

Sandman_28054 · 07-06-11, 09:29 PM

Can SH3 Commander run both SH3 and GWX 3.0?

frau kaleun · 07-06-11, 10:02 PM

Commander is a standalone program, and will work with the stock game and any supermod.

I know in the past there were some options in Commander that could possibly interfere with aspects of particular mods, but as far as I know those have all been dealt with in the current version.

To be absolutely sure you can always ask if you encounter a particular issue or find that something isn't working the way you think it should.

But I have run Commander with GWX3 almost since I first started playing, plus a huge number of other mods, and never had a problem that wasn't caused by me doing something I shouldn't have done in the first place.

If you are going to try Commander I strongly suggest you read through the User Guide that is provided with the installation, it is short and well-done and will answer just about any question about how it works and what it can (and cannot) do.

FIREWALL · 07-07-11, 12:56 AM

There are no dumb questions around here if your serious Sandman.

Sandman_28054 · 07-07-11, 05:45 AM

I guess I should be a little more specific.

I have SH3 patched and SH3 Commander running that.

I had problems in the past with GWX 3.0 and uninstalled it.

A couples of days ago I re-installed it.

Since SH3 Commander is already there, can it run GWX 3.0 along with SH3?

max-peck · 07-07-11, 05:57 AM

Quote:

Originally Posted by Sandman_28054

Since SH3 Commander is already there, can it run GWX 3.0 along with SH3?

I believe so, but you need to ensure you have also ran the Commander + GWX compatibility patch

http://www.subsim.com/radioroom/down...o=file&id=1421

flag4 · 07-07-11, 06:28 AM

Quote:

Originally Posted by FIREWALL

There are no dumb questions around here if your serious Sandman.

DITTO!

(there should be a permanent post atop the page - 'THERE ARE NO DUMB QUESTIONS.' )

obvioulsy, there may be, one or two, now and again, but in general nope, there aint!
should i stop now?

Jimbuna · 07-07-11, 06:44 AM

SH3/GWX/SH3Commander are fully compatable.

You will need this patch for SH3Commander to work with GWX however:

http://www.gamefront.com/files/12815...Commanders_exe

Fish In The Water · 07-07-11, 08:27 PM

Quote:

Originally Posted by Sandman_28054

Since SH3 Commander is already there, can it run GWX 3.0 along with SH3?

Should be fine as long as you have the config patch installed.

Jimbuna · 07-08-11, 05:10 AM

I hear the echoes

Paul Riley · 07-08-11, 05:26 AM

Quote:

Originally Posted by frau kaleun

Commander is a standalone program, and will work with the stock game and any supermod.

I know in the past there were some options in Commander that could possibly interfere with aspects of particular mods, but as far as I know those have all been dealt with in the current version.

To be absolutely sure you can always ask if you encounter a particular issue or find that something isn't working the way you think it should.

But I have run Commander with GWX3 almost since I first started playing, plus a huge number of other mods, and never had a problem that wasn't caused by me doing something I shouldn't have done in the first place.

If you are going to try Commander I strongly suggest you read through the User Guide that is provided with the installation, it is short and well-done and will answer just about any question about how it works and what it can (and cannot) do.

Fire Torpedo ,recieve bacon LOL ,that was so funny.
Nice to see you again by the way

Sandman_28054 · 07-08-11, 06:38 AM

Quote:

Originally Posted by jimbuna

SH3/GWX/SH3Commander are fully compatable.

You will need this patch for SH3Commander to work with GWX however:

http://www.gamefront.com/files/12815...Commanders_exe

Sorry, but I have tried for two days to d/l this and I can't.

Is there another place tp d/l it?

Sandman_28054 · 07-08-11, 06:43 AM

Will this work instead?

GWX3.0 SH3 Cmdr3.2 config files

WetOne · 07-08-11, 07:20 AM

Just downloaded it, link works fine for me !?

frau kaleun · 07-08-11, 07:24 AM

Quote:

Originally Posted by Sandman_28054

Sorry, but I have tried for two days to d/l this and I can't.

Is there another place tp d/l it?

Quote:

Originally Posted by Sandman_28054

Will this work instead?

GWX3.0 SH3 Cmdr3.2 config files

What you need is here:

http://www.subsim.com/radioroom/down...o=file&id=1421

GWX3.0 SH3 Cmdr3.2 config files v1.2 installer (376.9 KB)

It's the self-installer for the necessary files. If that's what you have already, you're good.

Quote:

Originally Posted by Paul Riley

Fire Torpedo ,recieve bacon LOL ,that was so funny.
Nice to see you again by the way

DUDE WHERE YOU BEEN?

Sandman_28054 · 07-08-11, 08:42 AM

Told you I was a dumbass!

I got the file. Downloaded it from Greywolves.com.

Everytime I tried to launch GWX from SH3 Commander, it would go to SH3 instead.

THen it hit me, change the default directory on SH3 commander.

Now it works just fine.

Thanks for your patience guys.

07-06-11, 09:29 PM	#1
Sandman_28054 Captain Join Date: Mar 2008 Posts: 547 Downloads: 279 Uploads: 0	Forgive me, but here is another dumb question. Can SH3 Commander run both SH3 and GWX 3.0?

07-07-11, 12:56 AM	#3
FIREWALL Eternal Patrol Join Date: Mar 2006 Location: CATALINA IS. SO . CAL USA Posts: 10,108 Downloads: 511 Uploads: 0	There are no dumb questions around here if your serious Sandman. __________________ RIP FIREWALL I Play GWX. Silent Hunter Who ???

07-07-11, 06:44 AM	#7
Jimbuna Chief of the Boat Join Date: Feb 2006 Location: 250 metres below the surface Posts: 190,483 Downloads: 63 Uploads: 13	SH3/GWX/SH3Commander are fully compatable. You will need this patch for SH3Commander to work with GWX however: http://www.gamefront.com/files/12815...Commanders_exe __________________ Wise men speak because they have something to say; Fools because they have to say something. Oh my God, not again!!

07-08-11, 05:10 AM	#9
Jimbuna Chief of the Boat Join Date: Feb 2006 Location: 250 metres below the surface Posts: 190,483 Downloads: 63 Uploads: 13	I hear the echoes __________________ Wise men speak because they have something to say; Fools because they have to say something. Oh my God, not again!!

07-06-11, 10:02 PM	#2
frau kaleun Rear Admiral Join Date: Nov 2009 Location: Skyri--oh who are we kidding, I'm probably at Lowe's. Again. Posts: 12,706 Downloads: 168 Uploads: 0	Commander is a standalone program, and will work with the stock game and any supermod. I know in the past there were some options in Commander that could possibly interfere with aspects of particular mods, but as far as I know those have all been dealt with in the current version. To be absolutely sure you can always ask if you encounter a particular issue or find that something isn't working the way you think it should. But I have run Commander with GWX3 almost since I first started playing, plus a huge number of other mods, and never had a problem that wasn't caused by me doing something I shouldn't have done in the first place. If you are going to try Commander I strongly suggest you read through the User Guide that is provided with the installation, it is short and well-done and will answer just about any question about how it works and what it can (and cannot) do.

07-07-11, 05:45 AM	#4
Sandman_28054 Captain Join Date: Mar 2008 Posts: 547 Downloads: 279 Uploads: 0	I guess I should be a little more specific. I have SH3 patched and SH3 Commander running that. I had problems in the past with GWX 3.0 and uninstalled it. A couples of days ago I re-installed it. Since SH3 Commander is already there, can it run GWX 3.0 along with SH3?

07-08-11, 06:43 AM	#12
Sandman_28054 Captain Join Date: Mar 2008 Posts: 547 Downloads: 279 Uploads: 0	Will this work instead? GWX3.0 SH3 Cmdr3.2 config files

07-08-11, 07:20 AM	#13
WetOne Watch Join Date: Aug 2009 Location: Johannesburg, South Africa Posts: 17 Downloads: 145 Uploads: 0	Just downloaded it, link works fine for me !?

07-08-11, 08:42 AM	#15
Sandman_28054 Captain Join Date: Mar 2008 Posts: 547 Downloads: 279 Uploads: 0	Told you I was a dumbass! I got the file. Downloaded it from Greywolves.com. Everytime I tried to launch GWX from SH3 Commander, it would go to SH3 instead. THen it hit me, change the default directory on SH3 commander. Now it works just fine. Thanks for your patience guys.