Realism- and gameplay-related hardcode fixes for SH3.EXE - Page 73

Kaleun Cook · 04-06-11, 05:36 AM

@

Quote:

ShaneTrott:

What I meant specifically from Neal's thread was:
Quote:
You will need to do a web search for archive rld-sh14.rar or search for Silent hunter 3 v1.4b No DVD/Fixed exe to get the archive. Do not post links in this forum, everyone should know how to use Google.

In the archive you will find 5 data sets (SH3.EXE, MISSIONENGINE.DLL, SIMDATA.DLL, UTILS.DLL & STATEMACHINE.DLL).
Then just install these files, and you have a SH3.exe compatible with H.sie also.

Stiebler.

Negative, wrong checksum. ;s

brett25 · 04-06-11, 11:37 AM

Quote:

So with NYGM 3.4 and MaGUI is this mod compatible?

i can report that this patch is working with both GWX 3.0 and NYGM with MagGUI 3.4 so far

Salvadoreno · 04-06-11, 11:53 AM

Quote:

Originally Posted by brett25

i can report that this patch is working with both GWX 3.0 and NYGM with MagGUI 3.4 so far

Hey brett.

NYGM has its own repair times i was told. No conflicts? Weird..

O ya i have MaGUI F.. Dont knoe how much of a difference that makes

brett25 · 04-06-11, 12:22 PM

you need to have repair times unchecked before you use the patch in NYGM

h.sie · 04-06-11, 01:33 PM

Maybe I found a solution to provide my fixes for all available versions of sh3.exe. So if you have an incompatible version and are interested in using my fixes, contact me and provide me your (original and unpatched) version of sh3.exe.

Rubini · 04-06-11, 04:11 PM

Hi h.sie,

How are you mate?

I'm using the last v15e (stiebler version) and i should like to say that all works as intend. The game is much more smart and challenge now!
It's really a much better game!

Only one issue (anyway i have to pay attention a bit more to have sure) is related to the cameraxxx.act (attached to the peri fix, no?) The blur is sometimes persistent in external camera (f12) even when my periscopes are down. The effect go out if i'm at slow speed. But notice: the strange is that my periscope are all down. I will try to look better to this issue and will post again if i find something better to explaim the problem.

makman94 · 04-06-11, 11:48 PM

Quote:

Originally Posted by Rubini

......

Only one issue (anyway i have to pay attention a bit more to have sure) is related to the cameraxxx.act (attached to the peri fix, no?) The blur is sometimes persistent in external camera (f12) even when my periscopes are down. The effect go out if i'm at slow speed. But notice: the strange is that my periscope are all down. I will try to look better to this issue and will post again if i find something better to explaim the problem.

hello Rubini,

there is no problem with CameraBehavior.act
look at your cameras.dat ....you are ,just, using a cameras.dat that has the blur effect at the node for free camera.
go at the node for free camera and in there find and delete the ''CameraEffects'' and all its child nodes...then save and you are ready to go

bye

h.sie · 04-07-11, 03:07 AM

@Rubini: Hi mate. I'm fine, thanks. And also thanks for the kind words. As you can see from makman's post, there is nothing wrong with CameraBehavior.act. Just follow his advice.!

@Makman: Hi mate. Thanks for clarification.

SquareSteelBar · 04-07-11, 03:23 AM

Quote:

Originally Posted by Rubini

...The blur is sometimes persistent in external camera (f12) even when my periscopes are down. The effect go out if i'm at slow speed. But notice: the strange is that my periscope are all down...

Even at my end.

Quote:

Originally Posted by makman94

...go at the node for free camera and in there find and delete the ''CameraEffects'' and all its child nodes...

Will try that.

h.sie · 04-07-11, 04:17 AM

I think, only users of MaGUI are affected, because makman94 added some blur-effect to the external camera view. The solution is to remove the blur-effect as makman described some posts above

SquareSteelBar · 04-07-11, 05:48 AM

I don't use MaGUI but there's a standalone 'FreeCamWaterOnLenseEffectMod' what I use...

Magic1111 · 04-07-11, 05:49 AM

Quote:

Originally Posted by h.sie

I think, only users of MaGUI are affected,

...and WAC User, because in WAC-Super-MOD that is an "Standard-Feature" ! Also WAC-User with FM_NI + FM_NI_Fix_for_WAC !

Best regards,
Magic

fitzcarraldo · 04-07-11, 06:08 AM

Quote:

Originally Posted by h.sie

I think, only users of MaGUI are affected, because makman94 added some blur-effect to the external camera view. The solution is to remove the blur-effect as makman described some posts above

I´m user of WS Magui (Widescreen version of MaGUI 3.4), and I haven´t the wrong effect in my GWX installation with the Hsie-Stiebler patch...

Regards.

Fitzcarraldo

h.sie · 04-07-11, 11:55 AM

I made my inofficial realism patch compatible to the NO-Starforce (NO-DVD) version of sh3.exe.

It does not only apply all my realism fixes up to V15E3, it also replaces some instable, crappy assembler routines (responsible for CTD) with much more stable routines from later GreenPepper versions of sh3.exe.

It is necessary to also install the contained mod "Supplement to V15E3" via JSGME.

4GB patch MUST be applied AFTER my patch.

Download: See my mediafire page, Folder "SH3 Bugfixes". There you'll find V15E3_NOSF-PatchKit.7z.

Read contained quick-manual.

This is still BETA TESTING!

Be careful: I cannot guarantee that savegames made with unpatched sh3.exe can be loaded with patched version. so don't patch mid-patrol!!!

Kaleun Cook · 04-07-11, 12:10 PM

Great news, I'm about to give it a try, will post experience later!

edit:

so far - (using LSH3 and loaded mid-carreer in port without problems)

- Periscope fix works (blurring at speeds higher than 4 knots, lowering at speeds over 7 knots)
- WO gets up automatically after surfacing
- Inaccurate range estimations seem to work
- Longer repair times work - I assume "05:00" on the damage screen means five hours for damaged batteries. Now my pretty experienced repair crew can handle the flooding quickly but will have to work pretty long on the broken things, great! Also due to not so quick repairs I seem to have lost a lot of Diesel out of the damaged Brennstoffzellen.

Not sure if this is intended or a bug (might be caused by the exe but as well by something else): receiving a lot of depth charges my batteries and electro engines died, leaving me completely unable to maneuver at about 140 meters. After the flooding was handled quickly, my boat didnt sink but started to rise slowly to the surface. Should it be like that?

- Realistic torpedo reload works
- Fog warning works

04-06-11, 12:22 PM	#1084
brett25 Seasoned Skipper Join Date: Mar 2008 Location: Oakland CA, USA Posts: 737 Downloads: 570 Uploads: 0	you need to have repair times unchecked before you use the patch in NYGM __________________ http://shmf.larsbundgaard.dk/index.p...1tn5&board=7.0

04-06-11, 01:33 PM	#1085
h.sie Admiral Join Date: Jul 2008 Posts: 2,192 Downloads: 131 Uploads: 0	Maybe I found a solution to provide my fixes for all available versions of sh3.exe. So if you have an incompatible version and are interested in using my fixes, contact me and provide me your (original and unpatched) version of sh3.exe. __________________ My Mediafire page: http://www.mediafire.com/hsie

04-06-11, 04:11 PM	#1086
Rubini Ocean Warrior Join Date: May 2005 Location: São Paulo Brazil Posts: 2,728 Downloads: 132 Uploads: 0	Hi h.sie, How are you mate? I'm using the last v15e (stiebler version) and i should like to say that all works as intend. The game is much more smart and challenge now! It's really a much better game! Only one issue (anyway i have to pay attention a bit more to have sure) is related to the cameraxxx.act (attached to the peri fix, no?) The blur is sometimes persistent in external camera (f12) even when my periscopes are down. The effect go out if i'm at slow speed. But notice: the strange is that my periscope are all down. I will try to look better to this issue and will post again if i find something better to explaim the problem. __________________ One gamer's must-have mod is another gamer's waste of time. -Sailor Steve

04-07-11, 03:07 AM	#1088
h.sie Admiral Join Date: Jul 2008 Posts: 2,192 Downloads: 131 Uploads: 0	@Rubini: Hi mate. I'm fine, thanks. And also thanks for the kind words. As you can see from makman's post, there is nothing wrong with CameraBehavior.act. Just follow his advice.! @Makman: Hi mate. Thanks for clarification. __________________ My Mediafire page: http://www.mediafire.com/hsie

04-07-11, 04:17 AM	#1090
h.sie Admiral Join Date: Jul 2008 Posts: 2,192 Downloads: 131 Uploads: 0	I think, only users of MaGUI are affected, because makman94 added some blur-effect to the external camera view. The solution is to remove the blur-effect as makman described some posts above __________________ My Mediafire page: http://www.mediafire.com/hsie

04-07-11, 05:48 AM	#1091
SquareSteelBar Sea Lord Join Date: May 2006 Location: U-73 Posts: 1,638 Downloads: 632 Uploads: 0	I don't use MaGUI but there's a standalone 'FreeCamWaterOnLenseEffectMod' what I use...

04-07-11, 11:55 AM	#1094
h.sie Admiral Join Date: Jul 2008 Posts: 2,192 Downloads: 131 Uploads: 0	I made my inofficial realism patch compatible to the NO-Starforce (NO-DVD) version of sh3.exe. It does not only apply all my realism fixes up to V15E3, it also replaces some instable, crappy assembler routines (responsible for CTD) with much more stable routines from later GreenPepper versions of sh3.exe. It is necessary to also install the contained mod "Supplement to V15E3" via JSGME. 4GB patch MUST be applied AFTER my patch. Download: See my mediafire page, Folder "SH3 Bugfixes". There you'll find V15E3_NOSF-PatchKit.7z. Read contained quick-manual. This is still BETA TESTING! Be careful: I cannot guarantee that savegames made with unpatched sh3.exe can be loaded with patched version. so don't patch mid-patrol!!! __________________ My Mediafire page: http://www.mediafire.com/hsie Last edited by h.sie; 04-07-11 at 12:30 PM.

04-07-11, 12:10 PM	#1095
Kaleun Cook Chief Join Date: Apr 2007 Location: ger Posts: 313 Downloads: 25 Uploads: 0	Great news, I'm about to give it a try, will post experience later! edit: so far - (using LSH3 and loaded mid-carreer in port without problems) - Periscope fix works (blurring at speeds higher than 4 knots, lowering at speeds over 7 knots) - WO gets up automatically after surfacing - Inaccurate range estimations seem to work - Longer repair times work - I assume "05:00" on the damage screen means five hours for damaged batteries. Now my pretty experienced repair crew can handle the flooding quickly but will have to work pretty long on the broken things, great! Also due to not so quick repairs I seem to have lost a lot of Diesel out of the damaged Brennstoffzellen. Not sure if this is intended or a bug (might be caused by the exe but as well by something else): receiving a lot of depth charges my batteries and electro engines died, leaving me completely unable to maneuver at about 140 meters. After the flooding was handled quickly, my boat didnt sink but started to rise slowly to the surface. Should it be like that? - Realistic torpedo reload works - Fog warning works Last edited by Kaleun Cook; 04-07-11 at 03:46 PM.