SH3 Commander-The Complete Super Deluxe Thallium Commander's Special Ultimate Edition - Page 42

Plissken_04 · 02-15-11, 07:24 AM

Quote:

Originally Posted by Robin40

Why is there in the directory Iambecomelife only the MFMInterimBeta and not the full MFM?

Because many players had some ctd with the full MFM,but with the InterimBeta players posted a more stable version with no ctd or less ctd

So Long

Maik

Captain Wreckless · 02-16-11, 03:23 AM

Quote:

Originally Posted by frau kaleun

In the downloads section here:

http://www.subsim.com/radioroom/down...o=file&id=2923

Or in Maik's archive, use the link/info in Plissken_04's signature in the post above yours.

Vielen Dank

CW

03-21-11, 02:50 PM

Does the SH3 Commander work with all other supermods or the GWX only?

frau kaleun · 03-21-11, 03:02 PM

It's a completely separate 'stand alone' program, so it works with pretty much any version of the game.

Sailor Steve · 03-21-11, 07:44 PM

Yep, not a mod at all, but a program that controls the game from the outside.

doppleganger · 03-25-11, 06:13 PM

Hello all

Newbie sim man here.

I have been playing with installing the GWX3.0, and SH3 Commander, and have got a little problem.

I have followed everything to a t, as far as I know. Hell, I have even been preparing instructions for some of my friends who have bought SH3 on Steam, like me. Nothing is in Program Files. I even set SH3 Commander to run as admin, just in case. And yes, I have run the GWX3_SH3Cdr3.2Files_v1.2.exe as well.

The thing is, if I select the rollback option in SH3cmdr, and eventually start SH3 via the cmdr, the cmdr application just dies off, and SH3 loads without the settings that are supposed to be set (I test by setting option to skip Intro Movies).

But, if I do NOT select the rollback option and proceed to launch SH3, it works! The cmdr application stays alive, and the SH3 app does launch and skips the intro movies.

The only weird thing I have done is install the SH3 Commander INSIDE the Silent Hunter 3 folder [it is in its own SH3 Commander folder, though]

Any advice on how I can fix this problem? Thanks!

Fish In The Water · 03-25-11, 06:28 PM

Quote:

Originally Posted by doppleganger

The thing is, if I select the rollback option in SH3cmdr, and eventually start SH3 via the cmdr, the cmdr application just dies off, and SH3 loads without the settings that are supposed to be set (I test by setting option to skip Intro Movies).

It's a known Steam issue...

Something to do with a launch delay...

There was a post just the other day that touched on this:

http://www.subsim.com/radioroom/show...24&postcount=4

Gargamel · 03-25-11, 09:36 PM

Quote:

Originally Posted by doppleganger

Hello all

Newbie sim man here.

I have been playing with installing the GWX3.0, and SH3 Commander, and have got a little problem.

I have followed everything to a t, as far as I know. Hell, I have even been preparing instructions for some of my friends who have bought SH3 on Steam, like me. Nothing is in Program Files. I even set SH3 Commander to run as admin, just in case. And yes, I have run the GWX3_SH3Cdr3.2Files_v1.2.exe as well.

The thing is, if I select the rollback option in SH3cmdr, and eventually start SH3 via the cmdr, the cmdr application just dies off, and SH3 loads without the settings that are supposed to be set (I test by setting option to skip Intro Movies).

But, if I do NOT select the rollback option and proceed to launch SH3, it works! The cmdr application stays alive, and the SH3 app does launch and skips the intro movies.

The only weird thing I have done is install the SH3 Commander INSIDE the Silent Hunter 3 folder [it is in its own SH3 Commander folder, though]

Any advice on how I can fix this problem? Thanks!

Oh good, I was beginning to think I was the only one who had this problem.

Follwo that link and you'll be fine. Just remember to do a manual rollback before you install new mods, or they don't take for some reason.

brabham85 · 03-26-11, 01:33 AM

I've got a little problem...

Always when I load the game off the port, at sea, I got a CTD.

But, if I load a save game in port, no problem, the game runs correctly.

Anybody knows the way to solve this?

Gargamel · 03-26-11, 01:42 AM

Quote:

Originally Posted by brabham85

I've got a little problem...

Always when I load the game off the port, at sea, I got a CTD.

But, if I load a save game in port, no problem, the game runs correctly.

Anybody knows the way to solve this?

Load in port.

Edit: Ok, not trying to be too cheeky here, one of the recent threads (3+ pages if a remember) had another member trying to make sure the coords were correct in the files. But TBH, if it's not a major issue to your game play, just start in port. I think it's more fun that way.

Gerald · 03-26-11, 05:27 AM

Quote:

Originally Posted by doppleganger

Hello all

Newbie sim man here.

I have been playing with installing the GWX3.0, and SH3 Commander, and have got a little problem.

I have followed everything to a t, as far as I know. Hell, I have even been preparing instructions for some of my friends who have bought SH3 on Steam, like me. Nothing is in Program Files. I even set SH3 Commander to run as admin, just in case. And yes, I have run the GWX3_SH3Cdr3.2Files_v1.2.exe as well.

The thing is, if I select the rollback option in SH3cmdr, and eventually start SH3 via the cmdr, the cmdr application just dies off, and SH3 loads without the settings that are supposed to be set (I test by setting option to skip Intro Movies).

But, if I do NOT select the rollback option and proceed to launch SH3, it works! The cmdr application stays alive, and the SH3 app does launch and skips the intro movies.

The only weird thing I have done is install the SH3 Commander INSIDE the Silent Hunter 3 folder [it is in its own SH3 Commander folder, though]

Any advice on how I can fix this problem? Thanks!

Welcome Aboard!

doppleganger · 03-26-11, 08:24 AM

Quote:

Originally Posted by Fish In The Water

It's a known Steam issue...

Something to do with a launch delay...

There was a post just the other day that touched on this:

http://www.subsim.com/radioroom/show...24&postcount=4

Ah! I see

Thanks for the info!

And thanks for the welcome!

brabham85 · 03-26-11, 02:34 PM

Quote:

Originally Posted by Gargamel

Load in port.

Edit: Ok, not trying to be too cheeky here, one of the recent threads (3+ pages if a remember) had another member trying to make sure the coords were correct in the files. But TBH, if it's not a major issue to your game play, just start in port. I think it's more fun that way.

You didn't understand. I was refering to about load a savegame, no about start a mission off or in a port. Always when I load a savegame in sea, the game crashes. And this is extremely annoying.

Jimbuna · 03-26-11, 06:31 PM

Welcome to SubSim doppleganger

Sailor Steve · 03-26-11, 06:35 PM

Quote:

Originally Posted by doppleganger

The only weird thing I have done is install the SH3 Commander INSIDE the Silent Hunter 3 folder [it is in its own SH3 Commander folder, though]

Any advice on how I can fix this problem? Thanks!

"The only weird thing"? SH3 Commander does NOT go inside SH3. It goes into Program Files. Did you not follow the instructions? No wonder it doesn't work.

03-21-11, 07:44 PM	#620
Sailor Steve Eternal Patrol Join Date: Nov 2002 Location: High in the mountains of Utah Posts: 50,369 Downloads: 745 Uploads: 249	Yep, not a mod at all, but a program that controls the game from the outside. __________________ “Never do anything you can't take back.” —Rocky Russo

03-26-11, 06:31 PM	#629
Jimbuna Chief of the Boat Join Date: Feb 2006 Location: 250 metres below the surface Posts: 190,646 Downloads: 63 Uploads: 13	Welcome to SubSim doppleganger __________________ Wise men speak because they have something to say; Fools because they have to say something. Oh my God, not again!!

03-21-11, 02:50 PM	#618
Grey pilgrim Stowaway Posts: n/a Downloads: Uploads:	Does the SH3 Commander work with all other supermods or the GWX only?

03-21-11, 03:02 PM	#619
frau kaleun Rear Admiral Join Date: Nov 2009 Location: Skyri--oh who are we kidding, I'm probably at Lowe's. Again. Posts: 12,706 Downloads: 168 Uploads: 0	It's a completely separate 'stand alone' program, so it works with pretty much any version of the game.

03-25-11, 06:13 PM	#621
doppleganger Nub Join Date: Jan 2011 Posts: 4 Downloads: 2 Uploads: 0	Hello all Newbie sim man here. I have been playing with installing the GWX3.0, and SH3 Commander, and have got a little problem. I have followed everything to a t, as far as I know. Hell, I have even been preparing instructions for some of my friends who have bought SH3 on Steam, like me. Nothing is in Program Files. I even set SH3 Commander to run as admin, just in case. And yes, I have run the GWX3_SH3Cdr3.2Files_v1.2.exe as well. The thing is, if I select the rollback option in SH3cmdr, and eventually start SH3 via the cmdr, the cmdr application just dies off, and SH3 loads without the settings that are supposed to be set (I test by setting option to skip Intro Movies). But, if I do NOT select the rollback option and proceed to launch SH3, it works! The cmdr application stays alive, and the SH3 app does launch and skips the intro movies. The only weird thing I have done is install the SH3 Commander INSIDE the Silent Hunter 3 folder [it is in its own SH3 Commander folder, though] Any advice on how I can fix this problem? Thanks!

03-26-11, 01:33 AM	#624
brabham85 Seaman Join Date: Dec 2010 Posts: 36 Downloads: 296 Uploads: 0	I've got a little problem... Always when I load the game off the port, at sea, I got a CTD. But, if I load a save game in port, no problem, the game runs correctly. Anybody knows the way to solve this?