Can't push torp into front tube slot

WernherVonTrapp · 10-22-10, 07:58 AM

Quote:

Originally Posted by jldjs

How does this get fixed? Return to base?

Return to base and end your patrol. That is, if you had hull damage. I think a simple refit at Home Port won't do the trick. Only ending patrol will repair it.

Armistead · 10-22-10, 10:50 AM

You're obviously in port, only place you can drag a torp. Sometimes the damage doesn't work or show with torps, so probably damaged.

Alky · 10-22-10, 12:30 PM

Or he's submerged?

WernherVonTrapp · 10-22-10, 04:44 PM

Maybe he has auto-loading disabled and has to drag the torps over to the tubes. Can't see why 4 tubes are OK but the other 2 aren't. He either has damaged tubes or a new bug has appeared.

Armistead · 10-22-10, 10:02 PM

Sound like two destroyed tubes. If auto was off they would still load in port automatically in the tubes.

What he could try is to cut auto off and see if one would drag over. Obvious, it won't drag in one swoop, but you'll see it loading over time.

I had it happen too many times my tubes get damaged or destroyed and it won't show up on the damage meter. Still, they usually load if damaged.

Might could look with the cam and see if two of the tubes are destroyed on the outside, but graphics can be funny hear if you refit or reload a save. One thing bad about reloading a save is it clears the damage board, but the damage is still there.

10-23-10, 07:10 PM

Was at periscope depth set to attack trying to
manually load tubes 1 and 4 after silent running.
I surfaced and moved to another area after a few hours of
game time I dove to periscope depth to attack
again and then I could loD those tubes!
No damage to tubes was ever reported! Strange
but it fixed itself.

Armistead · 10-23-10, 09:08 PM

If you have auto load on they will install automatically. If you have it off, you need to drag each to a slot, then you will see it eventually load.

Sounds like to me you had silent running on, then they won't load regardless. You surfaced which cuts silent running off, thus they started loading again.

10-22-10, 12:30 PM	#3
Alky Lieutenant Join Date: Jun 2007 Location: Abbotsford BC Canada Posts: 258 Downloads: 141 Uploads: 0	Or he's submerged? __________________

10-22-10, 04:44 PM	#4
WernherVonTrapp Admiral Join Date: Jul 2009 Location: Now, alot farther from NYC. Posts: 2,228 Downloads: 105 Uploads: 0	Maybe he has auto-loading disabled and has to drag the torps over to the tubes. Can't see why 4 tubes are OK but the other 2 aren't. He either has damaged tubes or a new bug has appeared. __________________ "The journey of a thousand miles begins with a single step." -Miyamoto Musashi ------------------------------------------------------- "What is truth?" -Pontius Pilate

10-22-10, 10:50 AM	#2
Armistead Rear Admiral Join Date: Dec 2008 Location: on the Dan Posts: 10,880 Downloads: 364 Uploads: 0	You're obviously in port, only place you can drag a torp. Sometimes the damage doesn't work or show with torps, so probably damaged.

10-22-10, 10:02 PM	#5
Armistead Rear Admiral Join Date: Dec 2008 Location: on the Dan Posts: 10,880 Downloads: 364 Uploads: 0	Sound like two destroyed tubes. If auto was off they would still load in port automatically in the tubes. What he could try is to cut auto off and see if one would drag over. Obvious, it won't drag in one swoop, but you'll see it loading over time. I had it happen too many times my tubes get damaged or destroyed and it won't show up on the damage meter. Still, they usually load if damaged. Might could look with the cam and see if two of the tubes are destroyed on the outside, but graphics can be funny hear if you refit or reload a save. One thing bad about reloading a save is it clears the damage board, but the damage is still there.

10-23-10, 07:10 PM	#6
jldjs Stowaway Posts: n/a Downloads: Uploads:	Was at periscope depth set to attack trying to manually load tubes 1 and 4 after silent running. I surfaced and moved to another area after a few hours of game time I dove to periscope depth to attack again and then I could loD those tubes! No damage to tubes was ever reported! Strange but it fixed itself.

10-23-10, 09:08 PM	#7
Armistead Rear Admiral Join Date: Dec 2008 Location: on the Dan Posts: 10,880 Downloads: 364 Uploads: 0	If you have auto load on they will install automatically. If you have it off, you need to drag each to a slot, then you will see it eventually load. Sounds like to me you had silent running on, then they won't load regardless. You surfaced which cuts silent running off, thus they started loading again.