{REQ} Daihatsu Landing Craft...anyone make it? - Page 2

tater · 07-28-10, 05:20 PM

I've got Miner1436's model in game, both as a static object (deck cargo), and as a functioning ship.

Gotta work on getting it loaded with men, as well as a little more seaworthy (was rocking so much all the crew fell over and died, lol)

tater · 07-28-10, 08:49 PM

This is sort of related; does anyone know what wings 3d units are in meters?

Bubblehead1980 · 07-29-10, 12:22 AM

cant wait to see it in game!

tater · 07-29-10, 04:50 PM

They'll not be very common outside ports I imagine, except perhaps in invasion forces...

tater · 08-04-10, 12:47 AM

Just an update. I've been testing it, and it's acting like a boat now (was acting like a cork before

).

I tried setting it as both a Landing Craft (type=15) and as a coastal vessel (type=104).

The former is more "proper" but since there are none in any campaign I know of, you'd never see it.

If the latter, then they show up wherever random type=104 calls are in the campaign. In RSRDC, I think this is only harbors.

Anyway, it's more likely to be seen on deck then—when the mod with that sort of stuff shows up

I put a 13mm MG on one, too. Some did get bow MGs in RL.

Right now, they just have the same sailors on them you see on ships. Not ideal, but that's what I have.

keltos01 · 08-04-10, 01:50 AM

[QUOTE=tater;1459416]Just an update. I've been testing it, and it's acting like a boat now (was acting like a cork before

).
a bit like the dinghies then ?

I tried setting it as both a Landing Craft (type=15) and as a coastal vessel (type=104).

The former is more "proper" but since there are none in any campaign I know of, you'd never see it. shame !

If the latter, then they show up wherever random type=104 calls are in the campaign. In RSRDC, I think this is only harbors.
will they show in RFB ? or WDAD ?

Anyway, it's more likely to be seen on deck then—when the mod with that sort of stuff shows up

I put a 13mm MG on one, too. Some did get bow MGs in RL.

yattaa !!!

Right now, they just have the same sailors on them you see on ships. Not ideal, but that's what I have.pictures please !!!

might look into that, since we might use them too in our mod with your permission..

regards,

keltos

tater · 08-04-10, 08:18 AM

I'll up some pictures for you in a bit

You are of course welcome to use it. The IJN built some collapsable landing craft for use with submarines. The used the propulsion end of torpedoes as the propulsion!

tater · 08-04-10, 11:29 AM

There is the armed version (you can see the gunner at the bow).

I need sergei to help me with getting the skin mapped better I think... then I I can make them look better. Also, I think the splinter shield need more, but smaller windows, and needs perhaps to be smaller period. Close enough, though! (thanks to miner for the great model!)

sergei · 08-04-10, 11:45 AM

Send me what you have, I'll take a look

tater · 08-04-10, 11:53 AM

Roger! PM pending.

Wilcke · 08-04-10, 02:46 PM

Excellent work tater, thanx to sergei for the pending skin! Well done guys!

tater · 08-04-10, 06:13 PM

The credits will include:

Skwas (because S3D makes my part of the work trivial)
Miner1436 (the heavy lifting of making the model and base texture maps)
Myself (mucking around in S3D and the game to make it act like a boat)
Sergei (for letting me sidetrack him from other, even cooler work

)
Keltos1 for his 13mm MG (since it's a plausible way to have the odd one show up ARMED to keep players honest

I'll try and throw this out the door in the not too distant future in a way that allows people to see it randomly in a plausible way in existing campaigns.

I have to admit one major bias, I'm not going to bother with vetting its appearance in the stock campaign. It'll show up as coastal traffic or not. If it shows up at sea... tough, the stock campaign isn't worth 2 seconds work IMO, anyone who wants can fix that. I'll make every effort to make it work seamlessly for RSRDC and TMO, however.

virtualpender · 08-04-10, 09:17 PM

Thank you Tater and all the others. A very neat addition.

keltos01 · 08-05-10, 02:11 AM

Quote:

Originally Posted by tater

There is the armed version (you can see the gunner at the bow).

I need sergei to help me with getting the skin mapped better I think... then I I can make them look better. Also, I think the splinter shield need more, but smaller windows, and needs perhaps to be smaller period. Close enough, though! (thanks to miner for the great model!)

beautiful work Tater !!!! looking forward to seeing one from my T-Class sub !

IJN vs British T-Class Duel :

50 machine gun vs 13.2 mm

keltos

tater · 08-13-10, 01:44 AM

Hmm, the model in question is about 19 meters long. The Japanese DID have a 17m type, but only built ~163 of them. The built 3229 14m type, and 1140 15m types.

I think I'm gonna scale this model down to 14m ...

08-04-10, 01:50 AM	#21
keltos01 Silent Hunter Join Date: Feb 2008 Location: Milan Italy Posts: 4,999 Downloads: 114 Uploads: 18	[QUOTE=tater;1459416]Just an update. I've been testing it, and it's acting like a boat now (was acting like a cork before ). a bit like the dinghies then ? I tried setting it as both a Landing Craft (type=15) and as a coastal vessel (type=104). The former is more "proper" but since there are none in any campaign I know of, you'd never see it. shame ! If the latter, then they show up wherever random type=104 calls are in the campaign. In RSRDC, I think this is only harbors. will they show in RFB ? or WDAD ? Anyway, it's more likely to be seen on deck then—when the mod with that sort of stuff shows up I put a 13mm MG on one, too. Some did get bow MGs in RL. yattaa !!! Right now, they just have the same sailors on them you see on ships. Not ideal, but that's what I have.pictures please !!! might look into that, since we might use them too in our mod with your permission.. regards, keltos __________________ "Honorable Builder of Sinking Ships"

08-04-10, 02:46 PM	#26
Wilcke The Old Man Join Date: Jan 2007 Posts: 1,441 Downloads: 234 Uploads: 0	Excellent work tater, thanx to sergei for the pending skin! Well done guys! __________________ Wilcke **For the best in Fleet Boats go to: Submarine Sim Central. http://forum.kickinbak.com/index.php Check out: A Brief Introduction to the Pacific Submarine War by Ducimus http://www.subsim.com/radioroom/showthread.php?t=128185 Operation Monsun plus OMEGU, the #1 ATO Solution for SH4! Signature Art by Gunfighter**

07-28-10, 05:20 PM	#16
tater Navy Seal Join Date: Mar 2007 Location: New Mexico, USA Posts: 9,023 Downloads: 8 Uploads: 2	I've got Miner1436's model in game, both as a static object (deck cargo), and as a functioning ship. Gotta work on getting it loaded with men, as well as a little more seaworthy (was rocking so much all the crew fell over and died, lol)

07-28-10, 08:49 PM	#17
tater Navy Seal Join Date: Mar 2007 Location: New Mexico, USA Posts: 9,023 Downloads: 8 Uploads: 2	This is sort of related; does anyone know what wings 3d units are in meters?

07-29-10, 12:22 AM	#18
Bubblehead1980 Navy Seal Join Date: Apr 2009 Location: Florida USA Posts: 7,153 Downloads: 613 Uploads: 44	cant wait to see it in game!

07-29-10, 04:50 PM	#19
tater Navy Seal Join Date: Mar 2007 Location: New Mexico, USA Posts: 9,023 Downloads: 8 Uploads: 2	They'll not be very common outside ports I imagine, except perhaps in invasion forces...

08-04-10, 12:47 AM	#20
tater Navy Seal Join Date: Mar 2007 Location: New Mexico, USA Posts: 9,023 Downloads: 8 Uploads: 2	Just an update. I've been testing it, and it's acting like a boat now (was acting like a cork before ). I tried setting it as both a Landing Craft (type=15) and as a coastal vessel (type=104). The former is more "proper" but since there are none in any campaign I know of, you'd never see it. If the latter, then they show up wherever random type=104 calls are in the campaign. In RSRDC, I think this is only harbors. Anyway, it's more likely to be seen on deck then—when the mod with that sort of stuff shows up I put a 13mm MG on one, too. Some did get bow MGs in RL. Right now, they just have the same sailors on them you see on ships. Not ideal, but that's what I have.

08-04-10, 08:18 AM	#22
tater Navy Seal Join Date: Mar 2007 Location: New Mexico, USA Posts: 9,023 Downloads: 8 Uploads: 2	I'll up some pictures for you in a bit You are of course welcome to use it. The IJN built some collapsable landing craft for use with submarines. The used the propulsion end of torpedoes as the propulsion!

08-04-10, 11:29 AM	#23
tater Navy Seal Join Date: Mar 2007 Location: New Mexico, USA Posts: 9,023 Downloads: 8 Uploads: 2	There is the armed version (you can see the gunner at the bow). I need sergei to help me with getting the skin mapped better I think... then I I can make them look better. Also, I think the splinter shield need more, but smaller windows, and needs perhaps to be smaller period. Close enough, though! (thanks to miner for the great model!)

08-04-10, 11:45 AM	#24
sergei Sea Lord Join Date: May 2008 Location: London UK Posts: 1,788 Downloads: 405 Uploads: 29	Send me what you have, I'll take a look

08-04-10, 11:53 AM	#25
tater Navy Seal Join Date: Mar 2007 Location: New Mexico, USA Posts: 9,023 Downloads: 8 Uploads: 2	Roger! PM pending.

08-04-10, 06:13 PM	#27
tater Navy Seal Join Date: Mar 2007 Location: New Mexico, USA Posts: 9,023 Downloads: 8 Uploads: 2	The credits will include: Skwas (because S3D makes my part of the work trivial) Miner1436 (the heavy lifting of making the model and base texture maps) Myself (mucking around in S3D and the game to make it act like a boat) Sergei (for letting me sidetrack him from other, even cooler work ) Keltos1 for his 13mm MG (since it's a plausible way to have the odd one show up ARMED to keep players honest I'll try and throw this out the door in the not too distant future in a way that allows people to see it randomly in a plausible way in existing campaigns. I have to admit one major bias, I'm not going to bother with vetting its appearance in the stock campaign. It'll show up as coastal traffic or not. If it shows up at sea... tough, the stock campaign isn't worth 2 seconds work IMO, anyone who wants can fix that. I'll make every effort to make it work seamlessly for RSRDC and TMO, however.

08-04-10, 09:17 PM	#28
virtualpender Sonar Guy Join Date: Apr 2007 Posts: 381 Downloads: 281 Uploads: 0	Thank you Tater and all the others. A very neat addition.

08-13-10, 01:44 AM	#30
tater Navy Seal Join Date: Mar 2007 Location: New Mexico, USA Posts: 9,023 Downloads: 8 Uploads: 2	Hmm, the model in question is about 19 meters long. The Japanese DID have a 17m type, but only built ~163 of them. The built 3229 14m type, and 1140 15m types. I think I'm gonna scale this model down to 14m ...