SH3 Commander-The Complete Super Deluxe Thallium Commander's Special Ultimate Edition - Page 28

JScones · 05-14-10, 03:28 AM

Open the "...\SH3 Commander\Personnel Files" folder. Rename rank images accordingly (ie rank11.gif becomes rank10.gif and so on).

But IIRC this will also carry on to your officer crew, meaning your Leutnants will carry Oberleutnant rank images and so on.

Unfortunately, due to the hassle and endless complaints from at least one user that couldn't understand what his problem was, I removed all rank references from SH3Cmdr a few releases ago and in doing so removed support for "rank bumping". More on this under "Troubleshooting" in the User Guide.

JScones · 05-14-10, 03:38 AM

Quote:

Originally Posted by jimbuna

15 months?....doesn't time fly

If you've got some ideas for additional features then I'd love to see them in a new release Jaesen.

Careful, don't want this thread to get reported

I think all the post "reporters" are flat out over in the SH5 forum, lol!

Magic1111 · 05-14-10, 04:33 AM

Quote:

Originally Posted by JScones

Open the "...\SH3 Commander\Personnel Files" folder. Rename rank images accordingly (ie rank11.gif becomes rank10.gif and so on).

But IIRC this will also carry on to your officer crew, meaning your Leutnants will carry Oberleutnant rank images and so on.

Yes, I had thought of that! My Player Rank shows then the right images, but then are the rank images for my crew officers wrong! This is not a good solution!

Best regards,
Magic

schlechter pfennig · 05-16-10, 10:44 PM

OK, this isn't a little nuance or annoyance . . .

JScones · 05-17-10, 02:34 AM

Quote:

Originally Posted by schlechter pfennig

OK, this isn't a little nuance or annoyance...

...and thus it's out of scope.

LGN1 · 05-27-10, 03:32 AM

Hi JScones,

from my work with SH3 Commander and discussions (see, e.g., http://www.subsim.com/radioroom/show...=169588&page=2 and http://www.subsim.com/radioroom/show...=149513&page=2 )I think that it would be great if Commander had the following additional three features:

1) Copy specified files with a certain probability (similar to the 'Randomized event.cfg' way). This allows more flexibility than the random folder feature.

2) Option for randomization only in port and keeping the effect over complete patrol (I guess difficult because of missing 'memory' feature and several Kaleuns in parallel)

3) Correlated events in Randomized events.cfg, i.e., several files are changed together with some probability (would allow to issue warnings via menu...txt about malfunctions made in *.sim files).

I assume point 2 requires a lot of work, so I guess it's not worth the effort. However, point 1 and 3 might require not that much work

Anyway, SH3 Commander in its present state is already a great tool! Thanks for creating it and all your efforts!

Regards, LGN1

Kapitän · 06-07-10, 03:13 PM

Hi, I posted this already in another thread but now realized that this would be the correct one for my question:

Is there any way to change the commander personal data besides the name, such as place and date of birth, naval entry, crew no., in SH3Commander?

Thanks, Kapitän

tnnn · 06-07-10, 05:05 PM

Yup, SH3Cmdr keeps all this info in a config file. I can't check it at the moment but if I recall correctly, it's stored in SH3Cdr directory.

Jimbuna · 06-08-10, 07:25 AM

Quote:

Originally Posted by Kapitän

Hi, I posted this already in another thread but now realized that this would be the correct one for my question:

Is there any way to change the commander personal data besides the name, such as place and date of birth, naval entry, crew no., in SH3Commander?

Thanks, Kapitän

You will find the above detail in the SH3Cmdr_en file located at C:\Program Files\SH3 Commander GWX3.0

JScones · 06-09-10, 05:38 AM

It's actually SH3Cmdr.ini.

Be aware though that SH3Cmdr doesn't just randomly pick dates from the air - every date relating to your history is calculated based on the Wehrmacht rules of the day. That is, SH3Cmdr works backwards from the career start date to determine your promotion dates and enlistment date, ensuring that the time you spent at each rank is realistic and within the "rules of the day" (which varied obviously as the war went on).

Thus if you change any date you might break historical continuity.

Jimbuna · 06-09-10, 04:23 PM

Kapitän · 06-10-10, 02:53 AM

Thanks Everyone, for your answers. When I simulate a commanders carreer, I like to use actual commanders, with there real names and bio. So, in that aspect, I'm merely trying to adjust the personal information of the commander in SH3, to the actual commander in real life.

So, let me clarify my question. Is it possible to change a commanders name and bio, AFTER it has already been generated by SH3Cmdr. If yes, where and how can I do this?

Thanks!

Kapitän · 06-13-10, 08:58 AM

Hi Everyone, I just wanted to report back, that I proceeded like to suggested above and that everything worked just right. Thanks to all for your help

dfscott · 06-19-10, 01:36 AM

I've been using SH3 commander with SH3+GWX gold (and the SH3/GWX files). It's worked fine, but now I'm trying to start a career on a specific date (Jan 1 1940). However, I can't get the correct date, regardless of what I put as a start date.

If I selected December '39 as my start date, (and select 1939 within SH3), I end up starting my patrol in August of 39. If I choose Jan of 1940, my patrol starts in October of 1940. I've created several different careers and they all do the same way.

Maybe it's just coincidence, but I looked at the Careers.cfg file in my other career and noticed that the current year in my other career is 1940 and the current month is 10:

Code:

CrtMonth=10
CrtDay=26
CrtYear=1940

Is there a manual way to force the start date of a patrol? I am running Steam and Windows XP (not Vista).

Gorshkov · 06-28-10, 05:43 PM

I have found one oddity in this program: single mission dates are not correlated with Flotilla's existence period. For instance I selected mission date 12.1944 but SH3 Commander still allowed me to select 2nd Flotilla active only until 8.1944 in Lorient. After this date remaining 2nd Flotilla's U-boats escaped from France to Norway and this unit was disbanded.

05-14-10, 03:28 AM	#406
JScones Navy Seal Join Date: Apr 2005 Posts: 5,501 Downloads: 19 Uploads: 0	Open the "...\SH3 Commander\Personnel Files" folder. Rename rank images accordingly (ie rank11.gif becomes rank10.gif and so on). But IIRC this will also carry on to your officer crew, meaning your Leutnants will carry Oberleutnant rank images and so on. Unfortunately, due to the hassle and endless complaints from at least one user that couldn't understand what his problem was, I removed all rank references from SH3Cmdr a few releases ago and in doing so removed support for "rank bumping". More on this under "Troubleshooting" in the User Guide. Last edited by JScones; 05-14-10 at 03:44 AM.

05-16-10, 10:44 PM	#409
schlechter pfennig Commander Join Date: Mar 2010 Posts: 462 Downloads: 53 Uploads: 7	OK, this isn't a little nuance or annoyance . . . Last edited by schlechter pfennig; 05-17-10 at 11:29 AM. Reason: my bad; deleted bulk of post

06-07-10, 03:13 PM	#412
Kapitän The Old Man Join Date: Mar 2010 Location: Frankfurt, Germany Posts: 1,580 Downloads: 29 Uploads: 0	Changing Commander Personal Data Hi, I posted this already in another thread but now realized that this would be the correct one for my question: Is there any way to change the commander personal data besides the name, such as place and date of birth, naval entry, crew no., in SH3Commander? Thanks, Kapitän __________________ KSDII-Ace/GWX 3.0 Gold/CCoM 10.0 + h.sie-patch; Windows 7 (64-bit); NVIDIA GeForce GTX650 (310.90)

06-09-10, 04:23 PM	#416
Jimbuna Chief of the Boat Join Date: Feb 2006 Location: 250 metres below the surface Posts: 190,539 Downloads: 63 Uploads: 13	__________________ Wise men speak because they have something to say; Fools because they have to say something. Oh my God, not again!!

06-10-10, 02:53 AM	#417
Kapitän The Old Man Join Date: Mar 2010 Location: Frankfurt, Germany Posts: 1,580 Downloads: 29 Uploads: 0	Thanks Everyone, for your answers. When I simulate a commanders carreer, I like to use actual commanders, with there real names and bio. So, in that aspect, I'm merely trying to adjust the personal information of the commander in SH3, to the actual commander in real life. So, let me clarify my question. Is it possible to change a commanders name and bio, AFTER it has already been generated by SH3Cmdr. If yes, where and how can I do this? Thanks! __________________ KSDII-Ace/GWX 3.0 Gold/CCoM 10.0 + h.sie-patch; Windows 7 (64-bit); NVIDIA GeForce GTX650 (310.90) Last edited by Kapitän; 06-10-10 at 03:26 AM.

05-27-10, 03:32 AM	#411
LGN1 Ace of the Deep Join Date: Mar 2006 Posts: 1,138 Downloads: 147 Uploads: 12	Hi JScones, from my work with SH3 Commander and discussions (see, e.g., http://www.subsim.com/radioroom/show...=169588&page=2 and http://www.subsim.com/radioroom/show...=149513&page=2 )I think that it would be great if Commander had the following additional three features: 1) Copy specified files with a certain probability (similar to the 'Randomized event.cfg' way). This allows more flexibility than the random folder feature. 2) Option for randomization only in port and keeping the effect over complete patrol (I guess difficult because of missing 'memory' feature and several Kaleuns in parallel) 3) Correlated events in Randomized events.cfg, i.e., several files are changed together with some probability (would allow to issue warnings via menu...txt about malfunctions made in *.sim files). I assume point 2 requires a lot of work, so I guess it's not worth the effort. However, point 1 and 3 might require not that much work Anyway, SH3 Commander in its present state is already a great tool! Thanks for creating it and all your efforts! Regards, LGN1

06-07-10, 05:05 PM	#413
tnnn Nub Join Date: Jul 2008 Posts: 4 Downloads: 8 Uploads: 0	Yup, SH3Cmdr keeps all this info in a config file. I can't check it at the moment but if I recall correctly, it's stored in SH3Cdr directory.

06-09-10, 05:38 AM	#415
JScones Navy Seal Join Date: Apr 2005 Posts: 5,501 Downloads: 19 Uploads: 0	It's actually SH3Cmdr.ini. Be aware though that SH3Cmdr doesn't just randomly pick dates from the air - every date relating to your history is calculated based on the Wehrmacht rules of the day. That is, SH3Cmdr works backwards from the career start date to determine your promotion dates and enlistment date, ensuring that the time you spent at each rank is realistic and within the "rules of the day" (which varied obviously as the war went on). Thus if you change any date you might break historical continuity.

06-13-10, 08:58 AM	#418
Kapitän The Old Man Join Date: Mar 2010 Location: Frankfurt, Germany Posts: 1,580 Downloads: 29 Uploads: 0	Hi Everyone, I just wanted to report back, that I proceeded like to suggested above and that everything worked just right. Thanks to all for your help __________________ KSDII-Ace/GWX 3.0 Gold/CCoM 10.0 + h.sie-patch; Windows 7 (64-bit); NVIDIA GeForce GTX650 (310.90)

06-19-10, 01:36 AM	#419
dfscott Bosun Join Date: Apr 2010 Location: Atlanta GA USA Posts: 68 Downloads: 49 Uploads: 0	Patrol Start Date I've been using SH3 commander with SH3+GWX gold (and the SH3/GWX files). It's worked fine, but now I'm trying to start a career on a specific date (Jan 1 1940). However, I can't get the correct date, regardless of what I put as a start date. If I selected December '39 as my start date, (and select 1939 within SH3), I end up starting my patrol in August of 39. If I choose Jan of 1940, my patrol starts in October of 1940. I've created several different careers and they all do the same way. Maybe it's just coincidence, but I looked at the Careers.cfg file in my other career and noticed that the current year in my other career is 1940 and the current month is 10: Code: CrtMonth=10 CrtDay=26 CrtYear=1940 Is there a manual way to force the start date of a patrol? I am running Steam and Windows XP (not Vista). __________________

06-28-10, 05:43 PM	#420
Gorshkov Commodore Join Date: Mar 2007 Posts: 604 Downloads: 139 Uploads: 0	I have found one oddity in this program: single mission dates are not correlated with Flotilla's existence period. For instance I selected mission date 12.1944 but SH3 Commander still allowed me to select 2nd Flotilla active only until 8.1944 in Lorient. After this date remaining 2nd Flotilla's U-boats escaped from France to Norway and this unit was disbanded.