[REL] Run Silent, Run Deep - The Campaign - Page 120

berobispo · 04-21-10, 11:47 AM

How can i check if RSRD is enabled? I'm using RFB2.0 and have the feeling it is not installed (using JSGME) properly... for example the name Iwo Jima is not shown on the map, I thought it was. Also the missions seem to be non RSRD ("patrol area" instead of "patrol for x hours within x nm of given point")

Also it says Jayapura where it should say Hollandia, is this fixed in RSRD?

cheers and happy hunting!

ps.: Clean SHIV install with only RFB2.0 and RSRD JSGME-wise enabled...came from TMO1.9

BillBam · 04-21-10, 12:11 PM

Quote:

Originally Posted by berobispo

How can i check if RSRD is enabled? I'm using RFB2.0 and have the feeling it is not installed (using JSGME) properly... for example the name Iwo Jima is not shown on the map, I thought it was. Also the missions seem to be non RSRD ("patrol area" instead of "patrol for x hours within x nm of given point")

Also it says Jayapura where it should say Hollandia, is this fixed in RSRD?

cheers and happy hunting!

ps.: Clean SHIV install with only RFB2.0 and RSRD JSGME-wise enabled...came from TMO1.9

Make sure the path you have in is MOD/RSRD/DATA and not MOD/RSRD/RSRD/DATA.

Sandman_28054 · 04-21-10, 01:22 PM

Is this compatible with TMO 1.9?

BillBam · 04-21-10, 02:38 PM

Quote:

Originally Posted by Sandman_28054

Is this compatible with TMO 1.9?

See the first post...TMO version link is there.

berobispo · 04-21-10, 05:07 PM

@billbam: thx! although I have installed tons of mods before (SH3 and SHIV) I missed that I had MODS/RSRD/RSRD/DATA

BillBam · 04-21-10, 08:40 PM

Quote:

Originally Posted by berobispo

@billbam: thx! although I have installed tons of mods before (SH3 and SHIV) I missed that I had MODS/RSRD/RSRD/DATA

No problem...it is easy sometimes when you have done the same thing way to many times hahaha!

Iron Budokan · 04-23-10, 08:35 AM

A couple of weeks ago I finally got my gaming computer and am running TMO with RSRD. I am having a great time and think RSRD is a superb mod for TMO. I just wanted to drop by and thank everyone who worked on it. I really like SH4 now. It's great!

SH4 fan · 04-25-10, 02:30 PM

(professor farnsworth voice) Good news everyone! I found that my main issue was I was getting bad downloads that were incomplete.

I occasionally still get a ntdll.dll or sound.act crash but i think that is because of time compression as I rush toward land. Thoughts?

However I noticed I have no sub tenders anymore and no ability to start at the tender with RSRDC. It is fine with TMO but as soon as RSRDC goes in, I lose the bases. I don't know if this is a bad download or not. The 7z size does not match the size listed in the DL section. I have 73.21 Mb listed as my file size when 76 is listed. I tried downloading the file 4 separate times each time when the file starts downloading it shows 73.2 Mb. It is the only file between all 4 (TMO, TMO patch, RSRDC, RSRDC patch) that does not match the listed file size.

Thanks for all the help!

Regards sh4 fan

Capt. Monroe -FIN- · 04-27-10, 05:08 PM

Does this work with the GFO mod, IE the Game Fixes Only mod? And if not, could someone post a link of the latest compatible release?

BillBam · 04-27-10, 05:30 PM

Quote:

Originally Posted by Capt. Monroe -FIN-

Does this work with the GFO mod, IE the Game Fixes Only mod? And if not, could someone post a link of the latest compatible release?

Yes but be sure to also use the GFO patch for RSRD

Jurgens · 04-27-10, 06:53 PM

i just insatlled rsdc on a previously modded version of sh 4 1.5
I use jsgme to manage my mods so with the others disabled its pretty much like an unmodded game, and i was in the museum going through units and it randomly crashes, also their are a number of ships that are all black as if they were sillutoes

B_MACH · 05-12-10, 01:29 PM

Hi Luker, I am enjoying you RSRDC mod. in both RFB 2.0 and TMO 1.9. I read in you notes that the modified campaign layers in the game do not start until early 1942. So what I found in 1941 may not apply.

I started a campaign on Dec.8, 1941 from Manila in a Sargo (Sailfish) class boat. First assignment was to Patrol Indochina sea routes off the coast of Indochina for 150NM radius. The area includeed Cam Ranh Bay. Looking at your convoy documents, Cam Ranh Bay was a hot bed for activity in December 1941 in preperation for the invasion of Malaya. Proceeded to Cam Ranh Bay arriving about 2100 on 12 Dec. Sighted a large convoy of 16 merchants and 6 escorts arriving from the south headed for CamRanh Bay. I managed to sink one murchant. I waited outside of the bay for a convoy to leave at 0830 on the 13th by your documents. No convoy left but a task force of 2 heavy crusiers and 2 BB with escorts came from the north about 1300. I sank one heavy crusier and the Task force went south.

I received a msg from TF3 N2 that a convoy may be at 110E 7 30N on 14 Dec.. Traveled south to 110E 7 30N at full speed. The task force of 2BB and one heavy cruiser arrived around 0800 on the 14th. sank a Konga BB that day. So SubComPac instructed me to return to my initial assignment.

I traveled back north to Cam Ranh Bay by 1000 on the 16th. A small convoy was returning from the south with merchants, troop carriers and one light crusier. It had one subchaser escort. Sank a merchant.

It appears to me in Dec.1941 the game has ships arriving at Cam Ranh Bay and none leaving. I should have seen a large convoy leaving Cam Ranh Bay by 1300 on 13 Dec. I am continuing on with the campaign. Thanks for your hard work. I sure wish we had a map that had the ports on it that are described in your documents. One more thing I did not read all of the readme files you provided.

The following mods are installed over a copy of SH4 WOP gold edition:
RFB 2.0
RfB Patch 06 Mar 2010
Hydrophone line extended
Realistic engine soundFX 0,9
RSRDC_RFB_575
RSRDC_VX5XX_PATCH 1
Map Labels 1.3

06-05-10, 05:17 AM

Been playing RSRDC +TMO, now on third patrol, can't find action anywhere, last 2 missions only found 2 task forces, 1 was borneo invasion force as recieved by radio message, other found by luck between borneo and celebes.
May be this mod is supposed to mimic historically, b ut where the realismn in having to follow conyvoy history pages... not like a time machine was avalible at the time... Was there no jap convoys not found by u.s. forced and reported???
OR am i looking in the wrong places? been cruising along trade lines in the south chinease sea mainly between indochina, borneo, malaysia and indonesia...

Many thanks..

TheBeast · 06-05-10, 01:25 PM

Quote:

Originally Posted by B_MACH

I sure wish we had a map that had the ports on it that are described in your documents.

You may want to check out this Nav Map Makeover MOD

JoeCorrado · 06-05-10, 01:25 PM

If you came across two task forces in the same mission, then you were fortunate. That is an embarrassment of wealth from my experience.

As for the merchant men- sometimes you find them, sometimes you don't- they are generally out there, but finding them can be an elusive task. Try patrolling near the intersect points of trade routes.

If you get bored in looking along the trade routes and are feeling lucky- hang out around a harbor entrance... or just go right on in close and see how that works out for you. Dangerous, but productive.

04-23-10, 08:35 AM	#1792
Iron Budokan Sea Lord Join Date: Dec 2006 Location: Texas Posts: 1,778 Downloads: 32 Uploads: 0	A couple of weeks ago I finally got my gaming computer and am running TMO with RSRD. I am having a great time and think RSRD is a superb mod for TMO. I just wanted to drop by and thank everyone who worked on it. I really like SH4 now. It's great! __________________ "You will take on England wherever you find her ships, and you will break her power at sea." --Iron Coffins, Herbert A. Werner http://kennethmarkhoover.com

04-27-10, 05:08 PM	#1794
Capt. Monroe -FIN- Swabbie Join Date: Mar 2009 Location: Finland Posts: 7 Downloads: 27 Uploads: 0	Does this work with the GFO mod, IE the Game Fixes Only mod? And if not, could someone post a link of the latest compatible release? __________________ -OH SHI..PWRECK!

04-27-10, 06:53 PM	#1796
Jurgens Swabbie Join Date: Apr 2010 Posts: 8 Downloads: 66 Uploads: 0	crash i just insatlled rsdc on a previously modded version of sh 4 1.5 I use jsgme to manage my mods so with the others disabled its pretty much like an unmodded game, and i was in the museum going through units and it randomly crashes, also their are a number of ships that are all black as if they were sillutoes

05-12-10, 01:29 PM	#1797
B_MACH Nub Join Date: Oct 2006 Location: East Coast, FL Posts: 4 Downloads: 100 Uploads: 0	Dec 1941 Cam Rand Bay Convoys Hi Luker, I am enjoying you RSRDC mod. in both RFB 2.0 and TMO 1.9. I read in you notes that the modified campaign layers in the game do not start until early 1942. So what I found in 1941 may not apply. I started a campaign on Dec.8, 1941 from Manila in a Sargo (Sailfish) class boat. First assignment was to Patrol Indochina sea routes off the coast of Indochina for 150NM radius. The area includeed Cam Ranh Bay. Looking at your convoy documents, Cam Ranh Bay was a hot bed for activity in December 1941 in preperation for the invasion of Malaya. Proceeded to Cam Ranh Bay arriving about 2100 on 12 Dec. Sighted a large convoy of 16 merchants and 6 escorts arriving from the south headed for CamRanh Bay. I managed to sink one murchant. I waited outside of the bay for a convoy to leave at 0830 on the 13th by your documents. No convoy left but a task force of 2 heavy crusiers and 2 BB with escorts came from the north about 1300. I sank one heavy crusier and the Task force went south. I received a msg from TF3 N2 that a convoy may be at 110E 7 30N on 14 Dec.. Traveled south to 110E 7 30N at full speed. The task force of 2BB and one heavy cruiser arrived around 0800 on the 14th. sank a Konga BB that day. So SubComPac instructed me to return to my initial assignment. I traveled back north to Cam Ranh Bay by 1000 on the 16th. A small convoy was returning from the south with merchants, troop carriers and one light crusier. It had one subchaser escort. Sank a merchant. It appears to me in Dec.1941 the game has ships arriving at Cam Ranh Bay and none leaving. I should have seen a large convoy leaving Cam Ranh Bay by 1300 on 13 Dec. I am continuing on with the campaign. Thanks for your hard work. I sure wish we had a map that had the ports on it that are described in your documents. One more thing I did not read all of the readme files you provided. The following mods are installed over a copy of SH4 WOP gold edition: RFB 2.0 RfB Patch 06 Mar 2010 Hydrophone line extended Realistic engine soundFX 0,9 RSRDC_RFB_575 RSRDC_VX5XX_PATCH 1 Map Labels 1.3

06-05-10, 05:17 AM	#1798
acid2all Stowaway Posts: n/a Downloads: Uploads:	Where's the action...??? Been playing RSRDC +TMO, now on third patrol, can't find action anywhere, last 2 missions only found 2 task forces, 1 was borneo invasion force as recieved by radio message, other found by luck between borneo and celebes. May be this mod is supposed to mimic historically, b ut where the realismn in having to follow conyvoy history pages... not like a time machine was avalible at the time... Was there no jap convoys not found by u.s. forced and reported??? OR am i looking in the wrong places? been cruising along trade lines in the south chinease sea mainly between indochina, borneo, malaysia and indonesia... Many thanks..

04-21-10, 11:47 AM	#1786
berobispo Helmsman Join Date: May 2009 Location: Germany Posts: 102 Downloads: 174 Uploads: 4	How can i check if RSRD is enabled? I'm using RFB2.0 and have the feeling it is not installed (using JSGME) properly... for example the name Iwo Jima is not shown on the map, I thought it was. Also the missions seem to be non RSRD ("patrol area" instead of "patrol for x hours within x nm of given point") Also it says Jayapura where it should say Hollandia, is this fixed in RSRD? cheers and happy hunting! ps.: Clean SHIV install with only RFB2.0 and RSRD JSGME-wise enabled...came from TMO1.9

04-21-10, 01:22 PM	#1788
Sandman_28054 Captain Join Date: Mar 2008 Posts: 547 Downloads: 279 Uploads: 0	Is this compatible with TMO 1.9?

04-21-10, 05:07 PM	#1790
berobispo Helmsman Join Date: May 2009 Location: Germany Posts: 102 Downloads: 174 Uploads: 4	@billbam: thx! although I have installed tons of mods before (SH3 and SHIV) I missed that I had MODS/RSRD/RSRD/DATA

04-25-10, 02:30 PM	#1793
SH4 fan Mate Join Date: Mar 2010 Posts: 51 Downloads: 65 Uploads: 0	(professor farnsworth voice) Good news everyone! I found that my main issue was I was getting bad downloads that were incomplete. I occasionally still get a ntdll.dll or sound.act crash but i think that is because of time compression as I rush toward land. Thoughts? However I noticed I have no sub tenders anymore and no ability to start at the tender with RSRDC. It is fine with TMO but as soon as RSRDC goes in, I lose the bases. I don't know if this is a bad download or not. The 7z size does not match the size listed in the DL section. I have 73.21 Mb listed as my file size when 76 is listed. I tried downloading the file 4 separate times each time when the file starts downloading it shows 73.2 Mb. It is the only file between all 4 (TMO, TMO patch, RSRDC, RSRDC patch) that does not match the listed file size. Thanks for all the help! Regards sh4 fan

06-05-10, 01:25 PM	#1800
JoeCorrado Weps Join Date: Apr 2005 Location: Illinois Posts: 366 Downloads: 176 Uploads: 5	If you came across two task forces in the same mission, then you were fortunate. That is an embarrassment of wealth from my experience. As for the merchant men- sometimes you find them, sometimes you don't- they are generally out there, but finding them can be an elusive task. Try patrolling near the intersect points of trade routes. If you get bored in looking along the trade routes and are feeling lucky- hang out around a harbor entrance... or just go right on in close and see how that works out for you. Dangerous, but productive. __________________ ============= My Game starts with GFO - Keepin' it real as it needs to be!